Temperature Transmitter
The ATxBlock is a 2-wire in-head temperature transmitter, microprocessor based designed for the flexibility of accepting mV, Pt100 and a variety of thermocouples as the input sensor. The ATxBlock delivers a scalable linear 4-20mA or 0-10V output signal proportional to the sensor temperature. User-friendly configuration software is provided for parameter set up, including sensor type, temperature range, filter, etc.
Other Details:
- sulating material: Polyamide, self-extinguishing to UL 94, V-0;
- Connection wire cross section: 0,14-1,5 mm² / AWG 28-14;
- Screw tightening torque: 0,8 Nm / 7.0 lb-in
- Termin block: CuZn
Specifications:
- Output: 2-wire 4-20 mA, linear with respect to the measured temperature.
- Total accuracy: Better than 0.25% of the maximum range for thermocouples and 0,15%
- for Pt100 and voltage
- Resolution: 0,001 mA (14 bits).
- Response Time: < 500 ms;
- Power supply: 12 to 35 Vdc, across the transmitter;
- Maximum load (RL): RL (max.)= (Vcc – 12) / 0,02
- Where, Vcc= Power supply voltage
- Operating Temperature: -40 to 85 °C
- Humidity: 0 a 90% RH
- Electromagnetic compatibility: EN 50081-2, EN 50082-2
- Isolation: 1500 Vac for 1 minute between sensor input and the 4 ~ 2 mA loop.
- Housing: ABS plastic.
- Dimensions: 44 mm (diameter) x 25 mm (height)