Tray Drier
Construction
- Cabinet Double walled cabinet with outer wall made of mild steel, and inner chamber can be either of mild steel or stainless steel as required.
- Insulation Glass wool filled between the walls to a minimum thickness of 2 inch.
- Door Two doors are fitted on heavy chrome plated brass hinges. One of the doors contains ball catch latch.
- Finish Outer side is painted with enamel paint. The inner side (in case of mild steel) is painted with heat-resistive aluminum paint.
- Accessories The aluminum or stainless steel trays can be provided at an extra cost.
Heating and Control
- Heating is carried out by means of strip heaters fitted on both the side walls of the inner chamber.
- Control The temperature is controlled by a thermostat. For better accuracy and safety of the oven,Digital Temperature Controller (PEW-202) can be provided at an extra cost.
- Temp. Range 5OC above the ambient temperature to 150OC maximum.
- Air Circulation The air is circulated by means of a fan fitted directly on the motor shaft at one side of the drier. The drier has a cross flow air circulation.
- Trays Trays are made of aluminum or stainless steel with a standard size of 32" X 16" X 0.5".
- Trolley Trolley arrangement can be provided to accommodate 12 or 24 trays as required at an extra cost.