Bacteriological Incubator
Construction
- Cabinet Double walled cabinet with outer made of mild steel, and inner chamber made of either mild steel or stainless steel as required.
- Insulation Glass wool filled between the walls to a minimum thickness of 2 inch.
- Outer door Outer door is fitted on heavy chrome plated brass hinges, and it contains a 'spring and roller ' type latch.
- Inner door Inner door is made of glass and is provided with a magnetic latch.
- Finish Outer side and inner sides (in case of mild steel) are painted with enamel paint.
Heating and Control
- Heating is carried out by a specially designed low-rating heater.
- Control The temperature is controlled by a thermostat. In PEW-60C, temperature is controlled by a solid-state temperature controller. For better accuracy and safety of the incubator, Digital Temperature Controller (PEW-202) can be provided at an extra cost.
- Heat Transfer Heat transfer occurs by natural air convection (except in PEW-60C) with proper inlet and outlet. In PEW-60C, heat is re-circulated with the help of a motorized blower.
- Temp. Range 5OC above the ambient temperature to 60OC maximum.
- Accuracy Better than ± 0.5OC.