Convenient hydrostatic level measurement.
SITRANS P transmitter, MPS series, is used for hydrostatic level measurements. It is immersed in the measured medium connected by a cable. The sensor has a stainless steel enclosure and is suitable for applications ranging from drinking water to corrosive liquids.

The single-range transmitter for gauge and absolute pressures.
Two types of pressure sensor are used in the Z Series: a stainless steel sensor and a sensor with ceramic diaphragm. An option for the Z Series meets the requirements of the compressor and pump industry by using a brass enclosure.

Single-range transmitter for differential pressure.
The differential pressure will be detected with a ceramics sensor and transformed into an output signal of 4 – 20 mA-, 0 – 5 V- resp. 0 – 10 V. The version with 0 – 10 V output signal can be connected directly to the LOGO!24 process controller

Transmitter with digital display and stainless steel enclosure.
The SITRANS P ZD digital pressure transmitter is provided with a display and a 10:1 turndown. The enclosure and the process connection are stainless steel. The digital display is available either radially or axially to the process connection.

Digital transmitters with integral diagnostics function, HART, PROFIBUS PA or Fieldbus Foundation communication, and convenient key operation. Within a range from 1 mbar to 400 bar, the SITRANS P DS III works well even with extreme chemical and mechanical loads or electromagnetic influences. It offers additional safety functions such as plant and self-monitoring, fault diagnostics and provides maintenance messages advising when the next calibration is due. The self-test function is unique for fail-safe operation. Measuring cells can be quickly and easily replaced so that on-site repairs are fast, simple and cost-effective. In addition to convenient local operation, SITRANS P transmitters can be connected to networks using the PROFIBUS PA, Foundation Fieldbus, or HART protocol.
SITRANS P DS III is designed for nominal pressures up to PN 420. The wetted parts are available in stainless steel, Tantalum, Hastelloy, Monel, or gold plated. Explosion-proof versions are also available. The high safety level is documented by globally recognized certificates, including ATEX, SIL, CENELEC, FM, CSA, NEPSI. It is tested according to the NAMUR guidelines. Many different versions of remote seals are available.

For the special requirements of the food and beverage, pharmaceutical and biotechnology industries.
The increased hygiene demands are satisfied by a range of stainless steel process connections. Cleaning and sterilization procedures (CIP, SIP) are standard practice.

The SITRANS P300 offers measuring precision and ruggedness, and advanced operation. The SITRANS P300 was designed for the food and beverage industry as well as pharmaceutical processes. It is an integral component of the SITRANS P family because of its measurement deviation of less than 0.075 %, a hygienic stainless steel housing with lasered rating plate, and the proven SITRANS P DS III local operating philosophy.
The SITRANS P300 meets the requirements of the EHEDG, FDA and 3A. This makes it ideal for applications in the food and pharmaceutical industries.
You can read the process data via a HART, PROFIBUS PA or Fieldbus FOUNDATION protocol. The SITRANS P300 is also available combined with absolute or relative pressure measuring cells with flush mounted diaphragms. The range of process connections are available for the food and beverage, pharmaceutical, and paper industries, including threaded and flanged versions.Adjust the zero, span, damping and other functions using three pushbuttons and the large, freely-programmable display. The versatility required for every application is integral in the SITRANS P. Whether
manual or HART operation, or operation via SIMATIC Process Device Manager (PDM), everything is possible.

The measuring possibilities of the SITRANS P line are extended by a wide range of remote seals. These seals are used when measuring hot, corrosive, highly viscous, or crystallizing material. The following types of remote seals are available:

• Flanges according to EN, ASME, and other connections, either rigid connection to the transmitter or via flexible capillary.
• Various filling liquids for temperatures of material up to 400 °C (750 °F).
• Various diaphragm material options.
• Special versions specific to each industry.