Mixers have long been noted for their efficiency in mixing dry powders and granular materials, adding small quantities of liquids to a dry batch, and for flowing paste. Recent modification in design, and the addition of auxiliary equipment have, however, greatly increased their field of usefulness.
Ribbon Blender is suited for solids blending where the material is less than free flowing. They are available in the customary U-Shaped trough with a variety of agitator arrangements. We offer sanitary design as well as heavy-duty versions utilizing heavier walls and oversized shafts and bearings for especially dense materials.
Fast and Effective Blending : The Ribbons (Inner and outer) are so arranged that when rotated it reaches each and every corner of the trough and imparts radial and linear motion to the whole of the materials to be mixed. At the same time material is moved from side of the trough to the centre and from the centre of the trough to the sides, resulting in quick and fast homogenising of the product. Blending is achieved in semi fluidised state in the upper zone of the trough when used for fine Powders. Double Ribbon configuration also brings material towards central bottom outlet when discharging. 

The Double cone blender is used for the intimate blending and mixing of dry powders,granules and crystals like colours, pigments, minerals, dyes, flour, grain, ceramics, detergents and other food, pharmaceutical and chemical powders. It is easy to clean and is available in wide range of specifications.
SALIENT FEATURES
• The conical shape at both ends enables uniform mixing in short period and easy discharge.
• All contact parts are made out of stainless 304/316/MS quality material, as required by customer.
• Maximum care has been taken to ensure safe operation of the unit.
• Safety gaurds will be provided with interlocking system.
• Suitable size of butter fly/Irish diaphragm valve at one end of the cone provided for material discharge & other end will be provided with openable      cover for material charging & cleaning.
• One shaft with fixed buffels is provided inside the cone.
• Unit will be availale in Standard/GMP and flame proof.

OPERATION The OCTAGONAL BLENDER is an efficient and versatile blending machine for mixing and lubrication process of dry granules homogeneously. Two third of the volume of the Blender is filled to ensure proper mixing. The Octagonal Blender gives best result for granules due to very slow speed and octagon shape of container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. 
SPECIAL FEATURES
• Suitable for dry mixing of products in granule form.
• Easy for loading and unloading of material.
• Easy for cleaning.
• All contact parts are made out of SS 304 / SS 316 quality material, as per customer requirement.
• The octagonal shape & slow speed of rotating gives sufficient continuous movement to the granules, thus results in good quality.
• Simple design requires minimum maintenance.
• Maximum care has been taken to ensure safe operation of the unit.
• Manual rotating facility with hand wheel for inching.
• Bigger size batch at low power consumption.

The Drum Blender system has been designed as an integral cycle system from formulation to utilisation. It involves mixing & batch identification of the product during intermediate steps inside the same hermetically sealed container. This system allows that the G.M.P. is followed as closely as possible (no cross. contamination, no pollution of the environment)
The machine consists of a fabricated MS Drum rotating at 20 RPM. It has an open able door in front, through which the SS Bins containing the products are loaded in the Drum. After the mixing, the Bins are removed and the Drum is recharged with another loaded Bin

Popularly known as "V" Blender or "Y" Blender is highly favored by the pharmaceutical and fine chemical industries, this design is superor to Ribbon Blenders and drum mixture. As the vessel rotates from the "V" position, the batch is divided into right and left legs. As the vessel continues its rotation, the batch blends and recombines. V Blenders can be built to suit customer requirements.
SPECIAL FEATURES
• Suitable for dry mixing of products in powder form.
• Easy for loading and unloading.
• Easy for cleaning.
• All contact parts are made out of SS304 / SS316 or SS316 L quality material, as per customer requirement.
• Simple design requires minimum maintenance.
• The "V" shape gives sufficient contineous movement to the granules, result in good quality.
• Shorter blending time
• Quick and complete discharge
• Lower power consumtion
• Liquid spray system and jacket are optional

we are mainly looking for Fluid Bed Coater and Starch Processing Machinery queries.
We are recognized as leading manufacturer, supplier and exporter of a wide range of Rotocone Blenders. All the contact parts made out of stainless steel of required grade by customer. These blenders are extensively used for mixing of the different liquids in the food and chemical industry. These products are widely used to blend various types of material efficiently.
Features:

• Sturdy design
• Easy to maintain
• Rust proof