Designed to provide flexible, accurate, and cost effective machining (such as chucking jobs, shaft turning, OD/ID, profile turning and thread cutting).
Salient Features :

» Infinitely variable spindle speeds, selectable in two automatic ranges.
» Optional 12-station tool turret in lieu of standard 8-station.
» Rigid tailstock with hardened and ground guideways.
» High precision antifriction bearings for the hardened and ground main spindle.
» Hardened and ground bed guideway.
» Both longitudinal and transverse axis (Z & X) are by ballscrews and AC servomotors with encoder feed back.
» Carriage and cross slide guideways are fixed with antifriction turcite liners for stick slip free movement.
» 8-station bidirectional tool turret . 12-station turret optional.
» Rigid tailstock with hardened and ground sleeve. Can also by supplied with optional rotating centre.

Bringing economy, precision and speed into heavy machine shop.
Salient Features :

» Box type construction of bed with flame hardened bed guideways.
» Main spindle supported by two Timken taper roller bearings in front which dampen vibrations during heavy cuts and at rear supported by precision NNK bearings.
» All gears in main drive and feed drive of ally steel, case hardened and ground.

Modular turning center for total turning solutions.
Salient Features :

» Compact high-tech product optimally customised to requirements.
» Built on modular concept with lot of add-on features and focus on quality.
» Integral 450 cast iron base with vibration dampening properties designed for maximum rigidity and stability.
» Facilitates turning, boring, facing, threading, rigid tapping, profiling and several other operations.
» Optional C-axis with driven tools/servo turret, integral spindle and 2 ?m spindle runout.
» 12-Station electromechanical turret in lieu of standard 8-station.
» Preloaded linear motion guideways.
» Preloaded both end supported ballscrews for enhanced rigidity while cutting.
» Higher rapid rates - reduced cycle times, reduced cost per piece.

Bringing economy, precision and speed into heavy machine shop.
Salient Features :

Optimally designed cost effective high productive chucker offering wide range of manufacturing solutions while meeting stringent quality requirements.

Comprises of two main spindle heads, with 8-station bidirectional turret mounted on compound sides for each spindle. This configuration enables the two main spindles to independently carry out machining operations on two components or on both sides of the sam e component simultaneously, thus eliminating intermediate storage, and virtually doubling the production.

Capable of turning variety of bar and chucking components involving straight and taper turning, drilling, boring, contouring, internal, and external threading, etc. Ideal for turning, boring, drilling and threading operations on components with length to diameter ratio of less than one.

Gearless headstock with spindle supported on high precision angular contact ball bearings and is driven by AC spindle motor.

Slides controlled with an AC servo system and are provided with low friction guideways.

Hydraulic chucking of the work ensures quick and rigid gripping during high metal removal.

Provides high degree of flexibility in machining components like gear blanks, housings, bearing races, etc. with dia. Up to 200 mm.

Ideal CNC chucker for economic machining in not only medium and large production but also justifies small batch production, through quick change over time.

Salient Features :

» Range of CNC Bar Turning Centers to meet accuracy, economy and flexibility in machining of turned parts in small to medium batches.
» Automatic turning of components with 2/4 axes control.
» Bar/chuck working.
» Cross/off center drilling and milling.
» C-Axis control.
» 12-Station tool turret with 6 driven tools.
» High rapid traverses and short indexing time.
» Complete machining of components.

Salient Features :

» Compact, low vibration portal frame construction with top mounting cam shaft, resulting in wide open tooling area, easy access to tooling and control cams, unrestricted swarf disposal.
» Bar automats AS series are with bar feeding and clamping feature.
» Chuck automats ASH series are with manual loading and unloading feature.
» Magazine attachment can be fitted to these machines.

Salient Features :
» Compact table top model, most ideal for training institutes.
» Machine with higher power suitable for steel cutting.
» Stepless AC drive for headstock.
» Hardened and ground spindle runs in precision antifriction bearings.
» Conventional FANUC/SIEMENS CNC system controlled machine best suited to technical educational institutions and small shops.
» Recirculating Ball screw and nut arrangement for longitudinal and cross axis.

  
CNC SYSTEM :

» FANUC/SIEMENS based CNC system with increment and continous JOG .
» Monocrome LCD screen.
» Stepless AC drive.
» Axis homing.
» Number of axis-2.
» Incremental and continous JOG.
» MDI/SINGLE BLOCK/Auto execution.
» Software limits, feed hold feed override 0-120%.
» Linear and circular interpolation.
» Dwell time.
» Thread cutting.
» Zero offset.
» Inch/Metric/Absolute/Incremental programming.
» Feed per minute and feed per revolution.
» Turning and Threading cycles.
» Block skip, G & M codes as per ISO.
» Backlash compensation.
» Bi-directional automatic 8-station tool turret with provision for holding 4 external and 4 internal tools.
» Slide moves on antifriction PTFE lining.
» Alarm messages.

  
STANDARD ACCESSORIES :

» One set of hand tools for normal operation.
» One set of instruction-cum-programming manual.
» Dual core (Blur and Off-white).
» Panel AC.
» MPG.