Featured Products

Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.

Welcome to HI TECH LAB SOLUTIONS

Laboratory Oven

  /> </div>
<div class=

Hi-Tech make Laboratory Oven (Memmert type) is specially designed to meet exact temperature profile by ensuring uniform homogeneous hot air mixture.

Features & Benefits

  •  Air circulating fan is fitted in the chambers to ensure forced air circulation.
  •  Triple Body Construction
  •  Electrically Heated (Forced convection)
  •  Precise Temperature controlled by PID Controller with timer
  •  Temperature range upto 300℃ (Upgradable upto 500℃)
  •  Internal Air Circulation with blowers.
  •  Standard & GMP variants available.

Tray Dryer

  /> </div>
<div class=

Hi-Tech make Tray Drier are designed for drying wetproducts of the crude drugs, chemical products or the granules etc.

Features

  •  Sturdy Triple body construction.
  •  Highly effective recirculating air system provided.
  •  Temperature upto 400
  •  Standard & GMP variants available.
  •  192 Standard Trays of Dimensions 24”x 24” can be accumulated.

Drum Heater

  /> </div>
<div class=

Introduction

Hi-Tech make Drum Heater are designed to providepractical & efficient means of freeze protection, viscocity control & ease of maintenance in elevated temperature.

Features

  •  Used to effectively heat Standard Drum of 200 ltr
  •  Total 12 nos. of U shaped heaters mounted on a Vertical heating system
  •  Digital Temperature Controller for precise monitoring of Temperature.
  •  Flameproof & Non-Flameproof variants available.
  •  12kW Power Ratings
  •  The unit is provided with castrol wheel for easy mobility.

Bacteriological Incubator

  /> </div>
<div class=

Introduction

Hi-Tech make Bacteriological Incubator are designed to achieveprecise incubation temperature of different laboratory samples for optimizing reaction stability.Chamber is designed as per FDA & ICHQIA compliancestandard & have reputation for reliability, quality & performance for research lab, Engineering Lab, Pharmaceutical lab, Clinical Lab, Microbiological lab etc.

Features

  •  Temperature Range 30°C to 65°C
  •  Highly effective recirculating air system is provide
  •  Glass Door for sample viewing
  •  High Density Glasswool Insulation.
  •  Interior Illumination provided.

Oil Bath

  /> </div>
<div class=

Introduction

“HI-TECH” make Constant Temperature Oil Bath are designed and fabricated to suit various I.S. standards application in the growing field of Medical, Agricultural Institution, Bio-Chemical Industrial, Research laboratories and Various Industries.

Features

  •  Temperature Range 50C above ambient to 250.00C.

Vacuum Oven

  /> </div>
<div class=

Hi-Tech make Vacuum Oven are designed to carry out processes such as annealing, brazing, sintering & heat treatment with high consistency & contamination, used in wide range of applications in both production industries & research laboratories . The temperature ranges from Room Temperature to 250°C.

Construction

  •  Double walled , gap between walls filled with glass-wool Insulation.
  •  Standard Model : Stainless steel Mirror polished chamber and heavy guage Powder- coated CRC exterior.
  •  GMP Model : Stainless steel Mirror polished chamber and exterior of dull finish stainless steel.
  •  Microprocessor based PID temp. controller with auto tune facility for precise control of temperature .
  •  Temperature Range 5.0 °C above ambient to 250.0 °C. Accuracy +/- 0.5 °C. Uniformity +/- 1.0 °C
  •  Temperature Display : Digital LED 3 ½ digit, Resolution 0.1 °C
  •  Heating system: Heating coil mounted on fibre glass cloth wounded on the chamber.

Muffle Furnace

  /> </div>
<div class=

SPECIFICATIONS

  •  Type of Furnace : Electrically Heated Muffle furnace.
  •  Working Temp Range : 5 degree above ambient to 900°C
  •  Maximum Working temperature : 1000°C for Max 1 hr only
  •  Temp Accuracy : +/- 3°C .
  •  Temp. Uniformity : +/- 5°C throughout the chamber.
  •  Muffle is made of siliminite.
  •  The lining of the door is done by High quality Mythan bricks.
  •  Temp. Display : Digital LED 3 ½ digit , Resolution 1°C.
  •  Back Port venturi system for quick exhaust.
  •  A grade K type sensor used for better accuracy.
  •  No contact of Hot surface to body for heat loss prevention.
  •  Front Hole for observation with shutter Knob.

Tube Furnace

  /> </div>
<div class=

Hi-Tech make Tube Furnace are designed to conduct synthesis & purifications of inorganic compounds thermolysis reactions by means of electric heating. Innert Tube Vacuum & Innert Tube Furnace used for vacuum & inert atmosphere for sintering process & other application.

Construction

  •  Temperature Range - 5℃ above ambient to 1400℃. Heating zone length - 300mm.
  •  Triple walled construction, thermally insulated with cooling system for better performance during continuous operation.
  •  Abrasion resistant tube to support heavy loads.
  •  Quartz tube ID :- Approx. 50mm(for Hi-Tech 28a series) 75mm(for Hi-Tech 28b series) & 100mm(for Hi-Tech 28c series).
  •  Type of furnace: -Programmable electrically heated single zone tube furnace.
  •  Tube material: quartz with end flanges with silicon/whiten gasket.
  •  Temp. Is controlled by microprocessor based PID temp. Controller, programmable up to 8 steps /segments per programed of ramp/soak profile.
  •  8Heating rate : programmable heating rate up to 5 to 25 ℃ /min

Water Bath

  /> </div>
<div class=

Introduction

The Purpose of water bath is to incubate sample in a water bath at constant temperature over period of time. Hence constant temperature water bath serves as an important Quality attribute of the product.

HI-TECH Make GMP constant temperature water bath are especially built to Pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA/ICH guidelines for long term , intermediate and accelerated stability studies.

Features

  •  Temperature Range 5.0 °C above ambient to 95 °C. Accuracy +/- 2 °C.
  •  Temperature Display : Digital LED 3 digit, Resolution 1°C.
  •  Heating system: U shaped Nichrome wire heater in SS Sheathing.

Construction

  •  Double walled , gap between walls filled with High grade glass wool Insulation.
  •  Standard Model : Stainless steel Mirror polished chamber and heavy guage Powder- coated CRC exterior.
  •  GMP Model : Stainless steel Mirror polished chamber and exterior of dull finish stainless steel
  •  Microprocessor based PID temp. controller with auto tune facility for precise control of temperature.
  •  Alarm : Audio visual alarm if temperature deviates from the preset temperature.

Viscosity Bath

  /> </div>
<div class=

Introduction

Kinematic viscosity is of primary importance in the design and selection of a wide range of petroleum products. Calibrated capillary viscometers are used to measure flow under gravity or vacuum at precisely controlled temperatures in Viscosity bath.Conforms to the specifications of : ASTM D445, D2532, D6074, D6158, IP 71, ISO 3104, DIN 51550, FTM 791-305.

Features

  •  Viscosity Bath to accomodate 6 Viscometers at a time.
  •  Temperature Range - Ambient to 120℃. (Upgradable upto 180℃.)
  •  Motorised Stirrer for Temperature Uniformity throughout the chamber - 2℃.
  •  PID Temperature Controller for Precise Temperature Control.
  •  Viscometers Tube Holders provided along with the Equipment.

Dry Heating Block And C. O. D. Digestor

  /> </div>
<div class=

Features

  •  Heating Block :- Aluminium(HE 30) Solid Block Heater provided for uniform heating
  •  Working Temperature - 300℃.
  •  Standard Hole Diameter of 40mm provided to accommodate 6 or 12 nos. 38mm dia Test-Tubes.
  •  PID Temperature Controller for Precise Temperature Control.
  •  Customized Hole Size available on request.

Refractory Furnace

  /> </div>
<div class=

Features

  •  Refractory Furnaces with temperature range from 600℃ to 1200℃.
  •  High quality ceramic brick lining for minimal heat loss and Maximum insulation.
  •  Kanthal A1 grade heater wire for optimal heating.
  •  A grade K-type temperature sensor used for better accuracy.
  •  Type of Furnace:- Electrically Heated Muffle furnace.
  •  Working Temp Range:- 5 degree above ambient to 1300°C
  •  Maximum Working temperature:- 1400°C for Max 1 hr only
  •  Back Port venturi system for quick exhaust.

Rotary Tube Furnace

  /> </div>
<div class=

HLT-RTF is a two zones rotary tube furnace, designed DC variable speed control and temperature control system. The rotary tube furnace can be for industrial or laboratory use and is cost effective for Research and Development environments.

Features

  •  High purity Alumina fibrous insulation for effective energy saving.
  •  Double shell constructed structure with 3 cooling fans.
  •  Geared DC motor drives Quartz tube with variable speed of 0-10 RPM.
  •  30° tilting of furnace with use of electricity.
  •  Rapid cooling and easy operation due to split cover.
  •  One pair of S.S. sealing flange with needle valves and the rotatable gas connector is included.
  •  High-Temperature stainless steel alloy tube with Max. working temperature at 900°C is available upon request.
  •  Vacuum: The tube furnaces with quartz tube are deigned for using under vacuum and low pressure.
  •  The concept of continuous power feeding and processing can be realized by the use of Magnetic Fluid Sealed Swivel
  •  Coupling in line with Volumetric Feeder and Rotary Furnace.

Cryostat Bath

  /> </div>
<div class=

Features & Construction

  •  Hi-Tech make Cryostat Bath are designed to maintain low cryogenic temperature of samples & devices mounted within the Cryostat Bath.
  •  Hi-Tech make Cryostat Bath are provided with circulatory pump to ensure accuracy of 1°C by PID controller.
  •  The unit mounted on castrol wheel for easy mobility.
  •  Temperature Range 0° to 50°C, -20°C to 50C, -30°C to 50°C, -60°C to Room Temperature, -80°C to Room Temperature
  •  Cooling : CFC free compressor utilising R 404/R23/Suva 95 eco-friendly refrigerant , with condenser , motor and relay .
  •  Double walled , gap between walls filled with PUF Insulation.
  •  Standard Model : Stainless steel Mirror polished chamber and heavy guage Powder- coated CRC exterior.
  •  GMP Model : Stainless steel Mirror polished chamber and exterior of dull finish stainless steel.

Application

  •  HI-TECH Make CRYOSTAT BATH is exceptionally efficient, reliable and durable. It ensures safe and dependable sample storage as well as for chilling facility by doing some external circulation.
  •  Application ranges, storage and preservation of valuable biological products, enzymes, virus, serum, blood plasma, heat sensitive vaccines, insulin, lever extract, medicines, chilling, balancing heat load, etc.

Laboratory Refrigerator

  /> </div>
<div class=

Introduction

Hi-Tech make Lab Refrigerator are designed for storageapplications in low temperature requirements for clinical research, pharmaceutical industries, microbiology, biotechnology, clinical diagnostic, hospitals & research institutions.Capacity Ranges from 90 Litres upto 2000 Litres.

Features

  •  Temperature Range - Ambient to 2 ℃.
  •  Double walled with Poly Urethane (PUF) Insulation with outer full length Glass viewing door with locking arrangement.
  •  Inner Chamber of S.S. 304
  •  Cooling : CFC free Kirloskar make Compressor utilising R 134A Eco friendly Refrigerant.
  •  Heavy duty Castor wheels for easy mobility.
  •  SS wire mesh Trays.
  •  PID Temperature Controller for Precise Temperature Control.

Deep Freezers

  /> </div>
<div class=

Introduction

Hi-Tech make Deep Freezer provides ideal freezing andstoring environment for medical & industrial applicationsfor research, blood banks, preservation of plasma, vaccines etc.These freezers are available with temperature range : Ambient to -20°C, -40°C, -60°C & -80°C. Capacity Ranges from 90 Litres upto 1000 Litres.

Features

  •  Glass window with Auto-Defrost mechanism to prevent frost formation.
  •  Double walled Construction with Poly Urethane (PUF) Insulation.
  •  PID Temperature Controller for Precise Temperature Control.
  •  Standard & GMP variants available.
  •  Uniform Air Circulation throughout the chamber by blowers.

Blood Bank Referigerator

  /> </div>
<div class=

Introduction

Hi-Tech Make Blood Bank Refrigerator designed for correct environment storage of blood bag where the temperature uniformity specification is + / - 1°C.

Features

  •  Temperature Range - 2℃ to 8℃.
  •  Double walled with Poly Urethane (PUF) Insulation with outer full length Glass viewing door with locking arrangement.
  •  SS Trays for Blood sample storage.
  •  Standard & GMP variants available.
  •  Uniform Air Circulation throughout the chamber by blowers.
  •  Capacity range available upto 1000 Liters

Pharma Refrigerator

  /> </div>
<div class=

Hi-Tech make Pharma Refrigerator provides ideal freezing and storing environment for medical & industrial applications for research, blood banks, preservation of plasma, vaccines etc. The Chamber is designed to meet the testing challenges of the competitive pharmaceutical research field. It serves as the perfect environment for refrigerated storage , conduction of shelf life studies and general incubation.

Specifications

  •  Temperature Range : 2℃ to Room Temperature.
  •  Temp. controller : Microprocessor based PID control with auto tune facility.
  •  Double walled , gap between walls filled with PUF Insulation.
  •  Standard Model : Stainless steel 304(316 optional) Mirror polished chamber and heavy guage Powder- coated CRC exterior.
  •  GMP Model : Stainless steel 304(316 optional) Mirror polished chamber and exterior of dull finish stainless steel.
  •  3” Thick CFC Free Puff Insulation
  •  Microprocessor based PID temp. controller with auto tune facility for precise control of temperature
  •  Temp. Sensor : PT- 100

B. O. D. Incubator

  /> </div>
<div class=

HI-TECH BOD Incubators are designed primarily to meet the requirements for tests of Biological Oxygen Demand/Biochemical oxygen demand and equipped for controlled incubation and storage of sensitive samples/cultures, vaccines etc. These incubators are designed to meet the testing challenge of pharmaceutical competitive research field and enhance the scientific efforts of educational institute and organization. HI-TECH Make GMP Model BOD Incubator is especially built to Pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA/ICH guidelines for long term, intermediate and accelerated stability studies.

Features

  •  Temperature Range: - 5.0°C to 75.0 °C.
  •  Accuracy +/- 0.1 °C.
  •  Uniformity +/- 1.0 °C
  •  Temperature Display: - Digital LED 3 ½ digit,
  •  Resolution 0.1℃ Heating system: - U shaped Nichrome wire heater in SS Sheathing.
  •  Cooling system: - Hermetically sealed CFC free Emerson compressor with R 134a refrigerant
  •  Air circulation: - Flange Motor with Impeller and blower.
  •  Interior Illumination for working Area.
  •  There will be two nos of blower from 450 Liters Onwards

Stability Chamber

  /> </div>
<div class=

Description / Specification of Stability Chamber

We are involved in offering a wide range of Stability Chamber to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Stability Chamber. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

 

Walk In Chamber

  /> </div>
<div class=

Hi-Tech make Walk in Chamber are designed for simulating monitoring & control of environmental conditions with temperature & humidity. The purpose of walk in stability testing is to provide evidence on the how the quality of drug substances or drug product varies with time under the influence of environmental factors such as temperature, humidity and light and to establish a re test period for the drug substance or product under recommended storage conditions. Hence stability chamber serves as an important quality attribute of the product.

HiTech make GMP walk in stability test chambers are especially built to pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA/ICH guidelines for long term, intermediate and accelerated stability studies.

Specifications

  •  Temperature range 20.0 °c to 60.0 °c. Accuracy +/- 0.2 °c. Uniformity +/- 1.0 °c
  •  Humidity range: 40% to 95% rh, accuracy +/- 3% Rh, uniformity +/- 3% rh.

Construction

  •  Double walled, gap between walls filled with Puf insulation.
  •  GMP model: stainless steel mirror polished chamber and exterior of dull finish stainless steel.
  •  Stainless steel trays. Adjustable tray height adjustment.
  •  HMI touch screen controller of 4.3”/ 7” with data logging facility.
  •  21 CFR part 11 compliant software with audit trial
  •  Data storage device has online and offline capabilities.

Plant Growth Chamber

  /> </div>
<div class=

Construction Detail

  •  This Chamber Closely monitor temperature, Humidity(Optional) and light intensity on the drugs and drug samples.
  •  Constructed and fabricated on duly Powder Coated body.
  •  Inside Chamber made of SS 304 with adjustable tray height.
  •  PUF insulation on fully automatic machine leaving no gaps and with sleek body design.
  •  Chambers are provided with effective air circulation system, refrigeration system, humidity system, full view observation glass door and stainless steel trays.
  •  Exposure of cool white florescent light for 1.2mil lux hours and UV-A Light for 200 watt hours per square meter on the test samples.
  •  Combined light exposure or individual light exposure with automatic light cut off system after exposure is achieved.
  •  Microprocessor-based PID controller with auto tuning for accurate control of temperature and humidity (optional) conditions

Photo Stability Chamber

  /> </div>
<div class=

Introduction

Hi-Tech make Photo-Stability Chamber are designed to provide temperature, humidity & day light intensity environment.The chamber is designed for formulation development for shelf life of drug substance & recommended for storage condition.The chamber is designed as per ICH guidelines

Features

  •  Fluorescent light intensities from 1000 to 10,000 lux/hour capacity.
  •  Double walled with Poly Urethane (PUF) Insulation with Inner full length Glass viewing door with locking arrangement.
  •  Temperature Range : 5.0 °C to 40.0 °C. Accuracy +/- 0.1 °C. Uniformity +/- 1.0 °C
  •  Humidity range : 25% to 95% RH, Accuracy +/- 3% RH , Uniformity +/- 3% RH.
  •  Lamp type : Florescent.
  •  UVA Intensities : 1.8 W/m² (requires about 111 hrs achieving ICH recommendation of 200W-hr/m²)
  •  VIS Intensities : 12 Klux (requires about 100 hrs achieving ICH recommendation of 1.2 million lux-hr)

Heating And Cooling Chamber

  /> </div>
<div class=
  • Chamber designed to accommodate various environmental conditions/storage conditions in a single chamber.
  •  The chamber comes with/without humidity conditions.
  •  Standard/GMP model available according to customer requirement.
  •  Temperature Range : -60°C to 200°C with controlled environmental conditions.

Vertical Autoclave

  /> </div>
<div class=

Features

  •  Microcomputer intelligent control .
  •  Interior and exterior made of chemical resistant Stainless steel SUS 304 .
  •  Self expanding seal ring Pressurized steam for efficient sterilization .
  •  Alarm function for completion of process and low water level .
  •  Automatic exhaust system for cold air and pressure .
  •  Over temperature protection device.
  •  Fully automatic and Manual both options available

Safety Features

  •  Pressure : Safety high pressure release value.
  •  Temperature : Safety high temperature cut off. Included if ordered separately
  •  Electric : Circuit Breaker

Horizontal Autoclave

  /> </div>
<div class=

Technical Specification & Construction:-

  •  Working Pressure Variable :- 5 to 30 PSI. Working Temperature :- 121°C (up graded up to 135°C).
  •  Internal Chamber :- Corrosion Resistant Stainless Steel.
  •  External Chamber :- Corrosion Resistant 304 Grade Stainless Steel.
  •  Door Single or Double Doors w/ automatic pressure locking.
  •  Insulation :- Glass wool Fibre.
  •  Sterilization Period :- 20 to 25 Minutes.
  •  With ISI marked water immersion type industrial heating elements Pressure stat.
  •  Safety Valve For excess pressure inside jacket and steam generator
  •  Mechanical Time w/ Alarm :- Regulates sterilization time and activates buzzer when sterilization cycle completes
  •  Fully automatic and Manual both options available

Tabletop Autoclave

  /> </div>
<div class=

HLT-TTA (Class B) autoclaves are great space-savers built for high performance. They are microwave-sized autoclaves that fit easily on the counters of busy clinics and dental offices. Can sterilize any load type, including porous or hollow materials, products in pouches, textiles and hollow items like wands, turbines, hand pieces, and tips.

Features

  •  Easy operation with portability benefits and space-saver.
  •  Safe, Effortless and Effective steam sterilization for rapid sterilization.
  •  Interior and exterior made of chemical resistant stainless steel 304.
  •  Microcomputer intelligent control with automatic air-removal and drying using vacuum.
  •  Automatic sterilization and automatic water fill-in and cut-off as per load requirement
  •  Smart and controllable heating and exhaust cycle through solenoid valve.

HLT-TTA sterilizer is designed and manufactured which passes Vacuum leak test, Bowie-Dick test, and Helix test.

Dean And Stark Apparatus

  /> </div>
<div class=

Features and Specification

The material to be tested is heated under reflux with a water-immiscible solvent, which co-distills with the water in the sample. Condensed solvent and water are continuously separated in a trap, the water settling in the graduated section of the trap and the solvent returning to the still.

Standard: - This apparatus conforms to ASTM D95 and other similar test methods.

Single Distillation Of Petroleum Product

  /> </div>
<div class=

Features

  •  Test equipment conforming to ASTM D86 / IP123 with electric heating assembly with Copper coil type voltage variac temperature controller, cooling bath (non-refrigeration), distillation flask 125ml, graduated cylinder 100ml, heater boards with 38 & 50mm diameter center holes made of Ceran Glass, thermometers conforming to ASTM 7C & 8C supplied with certificate. ℃.
  •  Power supply : 230 ±10% Volt AC, 1 Phase, 50 Hz.
  • Standard: - Confirms to: ASTM D86. IP 123. IS:1448.P-18

Twin Distillation Of Pertoleum Products

  /> </div>
<div class=

Features

  •  Test equipment conforming to ASTM D 86 / IP 123 with electric heating assembly with Copper coil type voltage variac temperature controller, cooling bath (non-refrigeration), distillation flask 125ml, graduated cylinder 100ml, heater boards with 38 & 50mm diameter center holes made of Ceran Glass, thermometers conforming to ASTM 7C & 8C supplied with certificate.
  •  Power supply : 230 ±10% Volt AC, 1 Phase, 50 Hz.

Automatic Cleaved Open Cup Test

  /> </div>
<div class=

Features

  •  Temperature Range: 79 to 400 ℃.
  •  Test Method : ISO 2592 , ASTM D 92 , IP 36 , IS 1448 ( P-69).
  •  Ignition Source : Gas Flame with two Pilot electric Coil.
  •  Temperature Sensor : PT-100 in stainless steel sheath.
  •  Flash/Fire Detector: Ionization principle based flash-detector sensor.
  •  Controller: HMI Touchscreen with colour display and Inbuilt storage of approx. 300 sample with audio visual alarm to check the machine. 3-wire RTD temperature sensor, free potential flame detector sensor as i/p. with automatic barometric reading correction.
  •  All necessary interlock for self-detection of fault.
  •  Flame-Sampling Arrangement: 10 Rpm, D.C. 12 v or 24V DC, gear motor, vertical movement reciprocating to & fro motion.
  •  Heater: 800 W, 230 v.
  •  1Electrical ignition for pilot flame-sampling. Ignition transformer having continuous o/p of 10.6 kV. D.C. from 230 v A.C. i/p.
  •  Equipment Overall Size (LxWxH): 280mm (W) X 530mm ( D ) X 415 mm ( H )
  •  Equipment Gross Weight: 22 Kg.
  •  Equipment supply will be 230 V Ac , 50 Hz with 15 amp capacity.

Manual Cleaved Open Cup Test

  /> </div>
<div class=

Features

  •  Temperature Range: 79 to 400 ℃.
  •  Test Method : ISO 2592 , ASTM D 92 , IP 36 , IS 1448 ( P-69).
  •  Ignition Source : Crank Mechanism spring loaded with manual handling.
  •  Temperature Sensor : Thermometer
  •  Flash/Fire Detector: Manual / Visual flash detection.

Manual Digital Cleaved Open Cup Test

  /> </div>
<div class=

Features

  •  Temperature Range: 79 to 400 ℃.
  •  Test Method : ISO 2592 , ASTM D 92 , IP 36 , IS 1448 ( P-69).
  •  Ignition Source : Crank Mechanism spring loaded with manual handling.
  •  Temperature Sensor : Digital temperature Indicator RTD Type .

Pensky Martene Flash Point Apparatus

  /> </div>
<div class=

Test Method

Flash Point is lowest temperature at which application of the ignition source causes the Vapour of a specimen of the sample to ignite under the specified condition of the test. The temperature of the approximately 70 ml test specimen is increased rapidly at first and then at a slower constant rate as the flash point is approached. At specified intervals a test flame is passed across the cup, to measure the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions.

Standard

Conforms to the specifications of: ASTM D93; IP 34; ISO 2719

Manual

  •  Temperature .Range: 79 to 400°C.
  •  Test Method : ISO 2719, ASTM D 93, IP 34, IS 1448 (P-21).
  •  Ignition Source : Crank Mechanism spring loaded with manual handling.
  •  Temperature Sensor : Thermometer .
  •  Flash/Fire Detector: Manual / Visual flash detection.
  •  BController: Energy regulator manual type.
  •  Flame-Sampling Arrangement: By Hand.
  •  Heater: 800 W, 230 v.
  •  Equipment Overall Size (LxWxH): 175mm (W) X 200mm ( D ) X 275 mm ( H )
  •  Equipment Gross Weight: 8 Kg.
  •  Equipment supply will be 230 V Ac , 50 Hz with 6 amp capacity.

Abels Flash Point Apparatus Manual

  /> </div>
<div class=

The automatic Abel closed-cup tester measures the flash point, the lowest temperature at which the vapours of a sample ignite upon the application of an ignition source. The tester can also be used to detect the ability of a sample to yield flammable vapors when maintained at an equilibrium temperature by the flash/no flash method.

Standard: - ISO 13736, IP 170

Manual Model

Working

The temperature of the approximately 70 ml test specimen is increased rapidly at first and then at a slower constant rate as the flash point is approached. At specified intervals a test flame is passed across the cup, to measure the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions.

Abels Flash Point Apparatus Automatic

  /> </div>
<div class=

Working

The temperature of the approximately 70 ml test specimen is increased rapidly at first and then at a slower constant rate as the flash point is approached. At specified intervals a test flame is passed across the cup, to measure the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. Select a test mode and enter the expected flash point; while the instrument executes the test, you are free to do other lab work. The instrument follows the exact procedures prescribed in the test method, and the completion of the test cycle is signaled by beeps. The test result is brightly shown on the color LCD module. The unit is equipped to store up to 200 successive test results and export to an optional printer or to a LIMS through an RS-232 port or USB memory

Saybolt Viscometer

  /> </div>
<div class=

Test Method:-

Determines the time required for 60mL of sample to flow through a calibrated orifice under precisely controlled conditions. Saybolt Universal Seconds (SUS) is the standard measurement for lubricants, insulating oils, and lighter fuel grades, and Saybolt Furl Seconds (SFS) is used for heavier oils and bitumen.

Standard: - Conforms to the specifications of ASTM D 88.

Kinematic Viscosity Bath

  /> </div>
<div class=

Test Method

Kinematic viscosity is of primary importance in the design and selection of a wide range of petroleum products. Calibrated capillary viscometers are used to measure flow under gravity or vacuum at precisely controlled temperatures.

Standard: - Conforms to the specifications of: ASTM D445, D2532, D6074, D6158, IP 71, ISO 3104, DIN 51550, FTM 791-305

Feature and Benefits

  •  Type of bath: - electrically heated bath.
  •  No of viscometer can be accommodated: 6 No.
  •  Inner chamber dimension: 18” x 15” x 7”
  •  Outer body size: 26” x 23” x 13”
  •  Max working temperature :-
              a. Model HT-KVH1 - Ambient to 120℃.
             b. Model HT-KVH2 - Ambient to 150℃.
  •  Bath capacity :- 6 sample at a time.

Temperature Controller

  •  Temperature is controlled by microprocessor based PID temp. Controller of reputed make
  •  It is having dual display with solid state relay for switching on & switching off the heater.
  •  Input power supply: 230 v ac, 50 Hz, 1 phase with 12 amp current rating.
  •  Heating load:2kW

Thermocouple

  •  Calibrated RTD type thermocouple will be provided capable of measuring up to 150 ℃ at accuracy of +/- 0.01 ℃

Electrical Requirement

  •  220-240V, 50/60Hz, Single Phase, 12.0A
  •  OR 115V, 50/60Hz, Single Phase, 24.A

Dimension

  •  26”x23”x13” (66x58x33) Net Weight: 56 lbs (22 kg)

Shipping Information

  •  Shipping Weight: 84 lbs (38 kg) Dimensions: 10.8 Cu. ft.

Capillary Viscometer

  /> </div>
<div class=

Description / Specification of Capillary Viscometer

We are involved in offering a wide range of Capillary Viscometer to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Capillary Viscometer. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

 

Redwood Viscometer

  /> </div>
<div class=

Test Method

These Viscometers are used to determine the Viscosity of Petroleum Products. Two adoption of Redwood Viscometer Are Available. No. 1 for Liquids having Redwood flow of 20 Seconds to 2000 Seconds and No. 2 for Liquids whose flow time exceeds 2000 Seconds and No. 2 for Liquids whose flow time exceeds 2000 Seconds. Redwood Viscometer is used for the Determination of Redwood Viscosity and which can be converted to Kinematic Viscosity also. It is also used for observing the Effect of Temperature on Viscosity by Plotting Graph.

Standard: - Conforms to the Specifications of : IP 70.

Feature and Benefits

  •  Type of Bath :- Electrically Heated Immersion Heater.
  •  Max Working Temperature :- 99℃
  •  Continous Working Temperature :- 95℃
  •  Capacity :- 1 Sample at a time
  •  Accuracy :- +/- 3℃
  •  Readability :- +/- 3℃
  •  Heating Load : 1 kW.
  •  Stirrer :- Manual Stirrer for maintaining uniformity throughout chamber.(HiTech 16A & 16A-Adv)

Brookfield Viscomter

  /> </div>
<div class=

We have been serving our clients with a highly functional range of Brookfield Viscometer in the market. This is used for measuring the viscosity of a fluid in laboratories. Our vendors use best in grade raw material and progressive machinery for fabricating Brookfield Viscometer as per the industrial set standards and norms. Ease of use, flexibility, reliable performance and quality of service have made Brookfield Viscometers favourites all over the world. Application: Viscosity, Texture, Moisture, Toxic gas and Powder analysis instruments for accurate material characterization measurements, making ideal for applications in many industries.

Several models of Brookfield Viscometer are available with us.

  •  DVNext Rheometer
  •  DVNext Cone/Plate Rheometer
  •  DV2T Touch Screen Viscometer
  •  DV1 Digital Viscometer
  •  DVE Low Cost Digital Viscometer
  •  Dial Reading Viscometer
  •  CAP 1000 Viscometer
  •  CAP 2000 Viscometer
  •  KU-3 Viscometer

Aniline Point Apparatus

  /> </div>
<div class=

Specification

Aniline point is used to characterize pure hydrocarbons and to indicate the aromatic content of hydrocarbon mixtures. Equal volumes of aniline and sample or sample plus n-heptane are stirred together while being heated at a controlled rate. After the two phases become miscible, the mixture is cooled at a controlled rate and the temperature at which the two phases separate is the aniline point or mixed aniline point of the sample.

Standard: - Conforms to: ASTM D611; IP 2; ISO 2977; DIN 51775; FTM 791-3601.

Carbon Residue Apparatus

  /> </div>
<div class=

The carbon residue value of the various petroleum materials serves as an approximation of the tendency of the material to form carbonaceous type deposits under degradation conditions similar to those used in the test method, and can be useful as a guide in manufacture of certain stocks.

Test Method

Provides an indication of relative coke forming properties of petroleum oils. The residue remaining after a specified period of evaporation and pyrolysis is calculated as a percentage of the original sample

Standard

Conforms to the specifications of: ASTM D189, D6074; ,D524 ,D6074 ANS Z-11.25; IP 13; ISO 6615; DIN 51551; FTM 791-5001; NF T

Features & Benefits

A weighed quantity of sample is placed in a crucible and heated to a high temperature for a fixed period. The crucible and the carbonaceous residue is cooled in a desiccator and weighed. The residue remaining is calculated as a percentage of the original sample and reported as conradson carbon residue.

Carbon Residue Ramsbottom

  /> </div>
<div class=

The carbon residue value of the various petroleum materials serves as an approximation of the tendency of the material to form carbonaceous type deposits under degradation conditions similar to those used in the test method, and can be useful as a guide in manufacture of certain stocks.

Test Method

Determines the ‘Carbon Residue’ left after evaporation and Pyrolysis of a sample oil in the Ramsbottom Furnace, providing an indication of the deposit forming tendencies of Fuels and Guidelines for the Processing of Refinery Products.

Standard:-Confirm to the Specification ASTM D 524, D 6074, IP 14, ISO 4262, FTM 791-5002 ,NF T 60- 117.

Features

  •  Type of Furnace :- Electrically Heated Block Furnace.
  •  Comprising of Cooking furnace with 5 bulb wells,(4 each for cooking bulbs and 1 for the control bulb).
  •  - Temperature is accurately controlled and maintained by fully automatic solid state time proportional digital controller and thermocouple.
  •  Temperature Range 0° to 50°C, -20°C to 50C, -30°C to 50°C, -60°C to Room Temperature, -80°C to Room Temperature
  •  Power supply 230 V, 1 Phase, 50 Hz.

Freezing Point Apparatus

  /> </div>
<div class=

Test Method

The Freezing Point of an Aviation Fuel is the Lowest Temperature at which the fuel remains free of Solid Hydrocarbon Crystals that can restrict the flow of fuel. The Temperature of the Fuel in the Aircraft Tank normally falls during flight depending upon Aircraft Speed, Altitude, and flight duration. The freezing point of the fuel must be lower than the minimum operational tank temperature. The test determines the temperature below which solid hydrocarbon crystals form in Aviation fuels. The sample is cooled with continuous stirring in a dewar-type sample tube until crystals appear.

Standard:-Conforms To ASTM D1177 , ASTM D2386 Specifications

Manual Freezing Model (Hi-Tech 23A)

Apparatus

Consist of one wooden insulated assembly , one Dewar Flask, Stirrer for above, Illumination Facility, Freezing Point Tube and Front Window for Observation along with Thermometer (with Calibration Certificate) for temperature observation.

Maximum Temperature

100°F (-73°C)

Electrical Connection

230V 50/60Hz, Single Phase, 4.5A

Sulphur Content Quartz Tube Method Unit

  /> </div>
<div class=

Test Method

This test determines the sulphur content within the range of 0.1 to 5 percent by weight in petroleum oils which cannot be burned completely in a wick lamp.

Specifications

This apparatus conforms to ASTM D1551 and other similartest methods.

Features:-

The sample is burned in a quartz tube, then driving thecombustion gas by a current of air through oxygenated water.

Cold Filter Plugging Point

  /> </div>
<div class=

Test Method:-

Cold Filter Plugging point is highest temperature, expressed in multiples of 1°C, at which a given volume of fuel fails to pass through a standardized filtration device in a specified time when cooled under the conditions prescribed in this test method.This test method is applicable to distillate fuels, including those containing a flow-improving or other additive, intended for use in diesel engines and domestic heating installations.

Standard: - ThisThis apparatus conforms to ASTM D6371 and other similar test methods.

Features

  •  Determines the low temperature flow characteristics of automotive diesel fuels and gas oils, including samples with flow improving additives, by measuring the temperature at which the sample ceases to flow through a wire mesh filter under standard test conditions.
  •  The equipment comprises of Cryostat upto –60°C, CFPP test kit and Vacuum device.
  •  Fully automatic digital temperature controller with PT-100 sensor.
  •  A well balance CFC-freecascade refrigeration system with eco-friendly                                                                                                           refrigerant.
  •                                                                                                Power supply : 230 V, 1 Phase, 50 Hz.

Reid Vapour Pressure Test

  /> </div>
<div class=

Test Method:-

This test method covers procedures for the determination of vapor pressure to determine handling & performance-liquified petroleum & LPG., gasoline, volatile crude oil, and other volatile petroleum products.

Standard: - This apparatus conforms to ASTM D323,D1267 and other similartest methods.

Features

  •  Bath for double test with Micro-PID digital temperature controller.
  •  The bath depth will be such that, the vapour pressure bomb is immersed to at least 25mm above the top of air chamber.
  •  Vapour pressure bomb consisting of one air and one gasoline chamber without cock, Gasoline chamber with cock & Pressure Gauge supplied.
  •  Temperature range : Above ambient to +100°C.
  •  Power supply : 230 V, 1 Phase, 50 Hz.

Copper Strip Corrossion Test Apparatus

  /> </div>
<div class=

Test Method

The Copper Strip Tarnish Test Assesses The Relative Degree Of Corrosivity Of Petroleum Products, Including Aviation Fuels, Automotive Gasoline, Natural Gasoline, Solvents, Kerosene, Diesel Fuel, Distillate Fuel Oil, Lubricating Oil And Other Products. A Polished Copper Strip Is Immersed In 30ml Of Sample At Elevated Temperature. After The Test Period, The Strip Is Examined For Evidence Of Corrosion And A Classification Number From 1-4 Is Assigned Based On A Comparison With The ASTM Copper Strip Corrosion Standards. For Aviation Fuels And Natural Gasoline The Sample Tube Is Placed Inside A Stainless Steel Bomb During Testing.

Standard

Conforms To The Specifications Of: ASTM D130, D6074, D6158; IP 154; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015.

Bomb Calorimeter

  /> </div>
<div class=

Test Method

Determines the ‘Gross Calorific Value of any solid or liquid sample by determining the water equivalent by burning 1 Gm. of Known CV sample.

Standard

Confirm to the specification ASTM D4809, D240, DE711, IS -1350- 1966, BS 1016 PART 5-1967, IP 12/63 T.

Cloud And Pour Point Apparatus

  /> </div>
<div class=

Test Method

Cloud point and pour point are indicators of the lowest temperature of utility for petroleum products. The sample is periodically examined while it is being cooled in the cloud and pour point apparatus. The highest temperature at which haziness is observed (cloud point), or the lowest temperature at which movement of the oil is observed (pour point), is reported as the test result.

Standard

Conforms to the specifications of ASTM D97, D2500, D5853, D6074, D6158; IP 15, 219; ISO 3015, 3016; DIN 51597; FTM 791-201; NF T 60-105.

Foaming Test Apparatus

  /> </div>
<div class=

Test Method

This test method covers the determination of the foamingcharacteristics of lubricating oils at 24°C and 93.5°C.Means of empirically rating the foaming tendency and the stability of the foam are described.

Standard: - This apparatus conforms to ASTM D892 and other similartest methods.

Feature and Benefits

The sample is blown with controlled volume of air atdifferent specified temperature. The result form ismeasured at the end of each operation period at thedifferent interval. This measures to know foaming oflubricating oil in application involve in turbulances highspeed gracing, or high speed pumping.

Di Electric Breakdown Voltage

  /> </div>
<div class=

Test Method

The dielectric breakdown voltage of an insulating liquid is of importance as a measure of the liquid's ability to withstand electric stress without failure. The dielectric breakdown voltage serves to indicate the presence of contaminating agents such as water, dirt, cellulosic fibers, or conducting particles in the liquid, one or more of which may be present in significant concentrations when low breakdown voltages are obtained.

Standard: - This apparatus conforms to ASTM D1816 and other similar test methods..

Feature and Benefits

  •  Voltage Source:- Suitable step-up Transformer supplied from a variable sinusoidal low- voltage source with Voltage capacities range 0 to 100 kV rms
  •  Frequency:- from 25 to 800 Hz
  •  Voltage rise time& accuracy:- Suitable as per Method A,B, & C of ASTM D 149
  •  Voltage rise time Resolution:- 0.1 kV ±1%
  •  Test Vessels/Medium:-Suitable Oil media Tank in line with therequirement of Standard
  •  Test Temperature range:-10 °C to 65 °CTemperature resolution 1 °C or better

Demulsification App For Lubricating Oils

  /> </div>
<div class=

Test Method

The apparatus consists of a steel frame supporting the control box, the jar and an electric lift that permits to move the sample stirrer up and down in the test funnel. The stirrer assembly can also be removed from the unit for cleaning. Stirrer speed is continuously showed on a digital tachometer.

Standard

Conforms To The Specifications Of: ASTM D2711.

Features & Benefits

  •  Borosilicate glass jar 500 mm depth, mounted on a enamel finished benchtop steel frame.
  •  Anodized aluminium cover with four-position turntable for the insertion of four graduated separatory funnels: a positioning device permits to locate the funnels exactly below the stirrer and avoid glassware breaking due to positioning mistakes.
  •  Stainless steel heaters and electrical bath stirrer.
  •  Variable speed electrical sample stirrer mounted on a electrical device which permits to lift and lower the stirrer easily in the sample. The stirrer assembly is also removable for cleaning.
  •  Digital tachometer in the control box which continuously shows the stirrer speed.
  •  Electromechanical timer which automatically stops the sample stirrer after 5 minutes of stirring.

Soft Point Apparatus

  /> </div>
<div class=

Description / Specification of Soft Point Apparatus

We are involved in offering a wide range of Soft Point Apparatus to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Soft Point Apparatus. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

 

Drop Point Apparatus

  /> </div>
<div class=

Test Method

Drop Point is a numerical value assigned to a grease composition representing the temperature at which the first drop of material falls from the test cup; that temperature being the average of the thermometer readings of the sample and bath. This test method covers the determination of the droppin gpoint of lubricating grease

Features

As per IP 31 the apparatus Consists of Brass Sleeve and case with metal cup and a glass Boiling tube with Cork fitted to a bath 600 ml beaker is provided. The assembly is kept on heater with energy Regulator control and stand with F.H.P. elect Stirrer. As per IP 132 the unit Comprises a glass beaker with fiber Cover together with glass test tube with three indentations to receive Chromium plated brass cup cork for tube and a 1.5 mm diameter Brass rod. The assembly is kept on heater with energy regulator and stand with F.H.P. motor stirrer.

Specifications

Drop point Apparatus as per IP 132 & ASTM D 566
Drop point Apparatus as per IP 31

Our Vision

* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.

Site Designed & Maintained by Aman Infotech
Flash Point Appratus, Redwood Viscometer, Bomb Calorimeter, Autoclave, Vaccum Oven, Muffle Furnace, Laboratory Oven, Tray Dryer, Drum Heater, Bacteriological Incubator, Oil Bath, Vacuum Oven, Tube Furnace, Water Bath, Viscosity Bath, Dry Heating Block And C. O. D. Digestor, Refractory Furnace, Rotary Tube Furnace, Cooling Equipments, Cryostat Bath, Laboratory Refrigerator, Deep Freezers, Blood Bank Referigerator, Pharma Refrigerator, B. O. D. Incubator, Controlled Environmental Conditions, Stability Chamber, Walk In Chamber, Plant Growth Chamber, Photo Stability Chamber, Heating And Cooling Chamber, Equipments Sterilization, Vertical Autoclave, Horizontal Autoclave, Tabletop Autoclave, Petroleum Testing Products, Dean And Stark Apparatus, Single Distillation Of Petroleum Product, Twin Distillation Of Pertoleum Products, Automatic Cleaved Open Cup Test, Manual Cleaved Open Cup Test, Manual Digital Cleaved Open Cup Test, Pensky Martene Flash Point Apparatus, Abels Flash Point Apparatus Manual, Abels Flash Point Apparatus Automatic, Saybolt Viscometer, Kinematic Viscosity Bath, Capillary Viscometer, Brookfield Viscomter, Aniline Point Apparatus, Carbon Residue Apparatus, Carbon Residue Ramsbottom, Freezing Point Apparatus, Sulphur Content Quartz Tube Method Unit, Cold Filter Plugging Point, Reid Vapour Pressure Test, Copper Strip Corrossion Test Apparatus, Cloud And Pour Point Apparatus, Foaming Test Apparatus, Di Electric Breakdown Voltage, Demulsification App For Lubricating Oils, Greece And Bitumen, Soft Point Apparatus, Drop Point Apparatus