Medium Speed Tube Packaging Line

The SL 100 is a medium speed tube packaging line producing about 33,000 tubes per shift. The LIMBUS 100 is the fastest single-head tube filler in Subnil’s range. It fills product into the tube and then closes it depending on the type of tube. Metal tubes are crimped whereas plastic/laminate tubes are sealed.

Once closed, the tube is ejected out of the tube filler onto a tube transfer system which flaps the tube exactly into the pocket of the product conveyor of the MERLIN 120XC horizontal cartoner. Here, first a pre-folded leaflet is picked up by a rotary pick-up device and fed to the pincer on the leaflet chain. Then, a carton is picked up from the stack by a rotary pick-up device, pre-broken and then loaded into the carton chain. The tube is inserted into the carton and it is closed on both sides either by tuck-in or gluing.

The cartons then travel from the outlet of the cartoner to the in-feed conveyor of the OSPREY 18V bundler where they are first collated in a desired matrix. The required length of BOPP film is then brought down by grippers; the bunch is wrapped with the same and pushed to the sealing station. Here, first the main overlapped film is sealed and subsequently the films on the pack ends are sealed to create a sturdy multipack.

The multipacks then travel to one of the KESTREL series casepackers where they are collated in a required configuration and then pushed into a case, which has been opened and kept ready earlier. The case is then taped or glue-sealed.

Hence, the first machine takes in the empty tubes and the product to be filled and the last machine produces a packed case, ready to be shipped out of the customer’s factory.