On pressing the reset button of timer, voltage will display on the volt meter. After the set time, o/p voltage will cut off. The voltage can be set by the Dimmerstate on the front panel.
Ramping Rectifier :
On pressing the reset button of timer, the voltage will start increasing & will reach to the set value (Set on the constant voltage controller). After the set time is over, o/p voltage will zero. Again by pressing the reset button, next cycle will be repeated.
Standard Ranges Available :
20 Ampere: 80 volt / 100 volt / 120 volt / 150 volt
50 Ampere: 80 volt / 100 volt / 120 volt / 150 volt
