Vacuum Powder Loading System

The system will be kept over hopper of compactor machine. System with 01 nos. conveying hopper, with control panel and vacuum source.

As mention the material will suck from the bottom of IPC and load the filling machine hopper through conveying system. After compaction same system can also suck the material from IPC and again load the hopper

Salient Features

• System is designed based on the consideration, material having density 0.5 gm/cc will be having conveyed rate of approximately 200 to 300 Kgs. / Hour.
• Convey receiver is having volume of 15 Liters
• Convey receiver is manufactured from Stainless Steel 316
• Flapper assembly will be provided at the bottom of hopper
• Sequential time based air blasted filter cleaning system
• Filter made from non-woven fabric, & washable.
• Vacuum source is a dry type geared rotary blower housed in a cast iron body with a 5 HP Power source
• Vacuum source is having silencer at suction and discharge port to reduce the noise level
• Vacuum source is equipped with a suction air filter to prevent the entry of foreign particles
• Vacuum Safety Valve for equipment safety
• Vacuum Gauge and isolator valve on the Vacuum power source for ease of maintenance.
• Vacuum regulating valve at the vacuum power source to maintain the process harmony
• Control Panel will be manufactured from Stainless Steel 304 having dust proof construction
• Control Panel is sequential time base having 4- operation cycles
• Material and Convey line is through static conductive, Non toxic flexible hose pipe, Total 40 Feet length is considered.