Communiting Mill
GranMech Comminuting Mill has been specifically designed for wet and dry granulation, Pulverization or dispersion of products or ingredients found in the pharmaceutical, Chemical and food industries. It is also finds application in Cosmetics, Fertilizers, detergents and Electrolux Industries etc.
Product kept in the hopper slide down to the enclosed chamber, where it is milled in between beaters and screen to the required mesh/micron size which can be collected at the bottom of the container.Quality and output depends upon the three main variables
- Beaters shape (knife/impact forward)
- Speed and
- Screen size.
Knife edge for coarse or large particles and impact or flat edge for finer particles. High speed for fine grinding, low speed for coarser particles. A wide range of screens is available for various process needs.
Salient Features
- cGMP point of view machine is provided with SS cladding on base, SS belt guards, SS cover on motor. No exposed painted surface on top of the machine. Motor rails, screws and guide rods are chrome plated.
- Beaters assembly is in a separate pillow blocks for ease in maintenance. Very less down time, as only beaters assembly will have to be reversed (and not the complete chamber) for making it knife to impact forward or vice-versa which can be done by operator.
- Swing type beaters assembly is provided as a standard supply which increases the output by 10 to 30% and is easy to clean.
- Beaters and shaft are of HCHC quality and beaters are further hardened and hard chrome plated. Beaters are fitted on a splinted shaft.
- Transmission of heat to the chamber from the bearings, is minimum, as they are away in separate pillow blocks. This facilitates to some extent in processing of heat sensitive products.
- Beaters assembly is dynamically balanced which reduces vibration and noise level and increases bearing life.
- Castors are provided for mobility and brakes can be applied for fixing machine at one place.
- Machine is available in Plain & Water jacketed model. Flame proof electrical can be provided on demand at extra cost.
- Beaters shape (knife/impact forward)
- Speed and
- Screen size.
- cGMP point of view machine is provided with SS cladding on base, SS belt guards, SS cover on motor. No exposed painted surface on top of the machine. Motor rails, screws and guide rods are chrome plated.
- Beaters assembly is in a separate pillow blocks for ease in maintenance. Very less down time, as only beaters assembly will have to be reversed (and not the complete chamber) for making it knife to impact forward or vice-versa which can be done by operator.
- Swing type beaters assembly is provided as a standard supply which increases the output by 10 to 30% and is easy to clean.
- Beaters and shaft are of HCHC quality and beaters are further hardened and hard chrome plated. Beaters are fitted on a splinted shaft.
- Transmission of heat to the chamber from the bearings, is minimum, as they are away in separate pillow blocks. This facilitates to some extent in processing of heat sensitive products.
- Beaters assembly is dynamically balanced which reduces vibration and noise level and increases bearing life.
- Castors are provided for mobility and brakes can be applied for fixing machine at one place.
- Machine is available in Plain & Water jacketed model. Flame proof electrical can be provided on demand at extra cost.