Construction :-
The heating plates are rectangular in shape and made up of MS Cast Iron plates with Groves for Heating Coil (SS Plate can also be provided on request) .The top plates overhang by supporting MS pillar which allows air insulation between plate and control Compartment to keep it cool. Long lasting Nicrome Heating wire with ceramic Beads are used for the heating process. A choice of Energy Regulator / Digital Temperature controller is provided.

Global 0nline oil bath are most useful for research & production application as a stability testing, conditioning, preheating & tempering. It is a double wall construction inner made of heavy gauge stainless steel chamber in one piece (for smaller capacity & argon welded for bigger size). Exterior is of aluminum dually powder coated finished with cerewool insulation in between two walls. A special long lasting heating element coupling type is easily replaceable is fitted with either thermostat or Digital temperature controller with PT—100 sensor.
The single speed stirrer is provided for uniformity of temperature.

Temperature Range :-  50°C to 270°C with ±1°C accuracy.

Operated on :- 230V. A.C, 50Hz
This oil bath is available in round & rectangular shape

 

Capacity

Power (Watt)

1 Ltr

750

2 Ltr

1000

3 Ltr

1250

5 Ltr

1500

10 Ltr

1750

20 Ltr

3000

SIZE (L x W x H)

Power (Watt)

12 “ x 12 “ x 7”

2 Kw

16 “ x 16” x 7”

2.5 Kw

Optional :-

Auto Tuned PID Digital Temperature Controller with Pt - 100 sensor

Process :- 
A powerful electrically driven blower forces hot air through aluminum anodized pegs fitted on top surface of dryer. Special heating elements fitted with fins to increase the surface area of hot zone are provided at the intake of air. The unit is also provided with energy regulators with built in thermostat controls to control the heater. A separate hot / cold air selector switch is provided at panel to blow the cold air (after heat process is over) or hot air.

Power :- 230 V, 50 Hz, single phase supply.

Description / Specification of Portable Autoclave

We are involved in offering a wide range of Portable Autoclave to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Portable Autoclave. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

All - Glass water distillation is a unique & intelligent Water distillation unit. The unit incorporates all Borosilicate glass parts, viz, Jacketed condenser, glass boiler, quartz silica tube, automatic water level tube etc. The heating element is ceramic bobbin heater with Nichrome heating wire. The unit has ultra unique feature for automatic water level maintain by solid - state device. It gives audible alarm when the water level is insufficient. The distillates of unit have very low conductivity (less than 1 mho). The company has two model viz, 1.5 lt / hr distillation water output for continuous run & 4.5 liters / hr capacity. Both the unit comes in 3 phase / single phase electrical power supply model. The whole unit of the system is housed in powder - coated GI sheet with excellent look. The unit is totally hassle & maintenance free with intelligent & user friendly.

Description / Specification of Orbital Shaking Incubator

We are involved in offering a wide range of Orbital Shaking Incubator to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Orbital Shaking Incubator. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Construction :-
The unit has a double walled construction, complete with fully SS 304 construction (Argon Welded Chamber) & a Jacket of 18 SWG. The unit is fitted with an efficient radial locking system made of mild steel, chrome plated, with paddle lifting device. The unit is supplied complete with stainless steel basket. The unit is fitted with safety and pressure release valves, water level indicator, cord & plug. The machine is fitted with a fully automatic microprocessor based temperature controller. The cycle is fully automatic including purging, sterilizing, rapid cooling & safety features such as process timer, low level water alarm, over heat Protection, high-pressure cutoff, two mechanical safety valves etc. The lid is made of SS.304, with Silicon rubber gasket used for sealing, supplied with pressure gauge & unique special round heater - to achieve pressure up to 20 Psi.

Double walled construction inner made of stainless steel. Exterior finished in powder coated epoxy paint with glass wool insulation & full view glass door along with the main door. Microprocessor based temperature controller cum indicator controls the Temperature & the delay time for compressor protection at power interruptions. Temp. Range: 5degree to 60degree C. The Fluorescent tube light is used as chamber light for illumination. On demand Software based Microprocessor programmable PID controller with Time proposnate with data logger & cyclic timer, Real clock Battery Back up &RAM memory 8Kx8 capacity printer &Pc interface controller with PT 100 Process Controller can be provided with the unit at Extra cost. Our technology of system is fully controlled, Easy to handle, user friendly, intelligent & Reliable.

The unit is used for producing pyrogen free distilled water in R&D labs, biological labs, hospitals and clinical research laboratories. The unit is wall - mounting with the full Body made up of stainless steel fitted with ISI certified safety ejection type immersion heaters. A constant water level arrangement is provided. A steam baffle is provided to take steam direct to the cold - water jacketed condenser. The stated output of the still is approximate as it is bound to vary according to the voltage of the MAINS. An electronic watch dog water level system with auto heater cut-off when water level is low along with buzzer can be provided at extra cost. 
Power Supply :- 230 V, 50 Hz.

Rapid oil Extraction Unit / App:

GMP model GC-78 offers an innovative feature in rapid oil extraction unit for textile industries. The unique feature are oil contents of tops & similar materials of clothes can be detected in less than 15 MIN, ideal for process control in the Textile mills. Simple, compact robust construction & fully made of SS 316. The apparatus was developed specifically for obtaining the oil content of Tops & similar cloth material. The principal of extraction is percolation of solvent through the wool sample in a simple metal tube. The extract as it drips from the tube is collected on a light aluminum tray held between two metal ring mounted on a temperature controller hot plate. The company provides the SS 316 ring mesh tray instead of Aluminum Tray .The method is applicable to tops, card slivers, Yarns & similar material from which small samples can be taken with confidence. These models are available jointly as one, two / three extraction unit.

 

The unique apparatus is used for determination of colour fastness of all textile materials irrespective of there composition & their form (yaru fibre etc.) to the action of soap & sodium carbonate solution at 60 degree C .The principle of this is that a specimen of textile in contact with the pieces of specified adjacent fabric is mechanically agitated in a soap soda solution rinsed & dried & the hang in colour of the specimen & the stirring adjacent fabrics are assessed with standard grey scales. The apparatus consist of a Argon weld Stainless Steel water bath containing a rotor with which glass container flask of 500ml.capacity are rotated at a speed of 40+_2 rev/min &thermostatically controlled electrical heating device to heat the water bath so as to maintain the temperature of test solution in container at 60+_2 degree C.A mechanical timer of 30 minutes is fitted for time duration of test .A soap soda solution is to be poured in flask after the temp maintain to 60 degree C The given specimen is dropped in glass flask & rotoris rotated at a 40rpm fixed for 30mints.The results are to be obtained & tested as per specification. Digital temperature controller can be given as option.

The bath has been designed with highly advance & Revolutionary cooling system to operate wide range from 1 c to 95 c to meet various needs. Double walled, Tough finished, Stainless Steel Chamber, Top & Exterior of G.I / M.S finished in epoxy powder coated finish. Hermetically sealed compressor -fan motor-condenser having Environment friendly gas for below ambient temperature, does the process & for above ambient SS immersion heater is used. The heat is transmitted from generator to water by direct conduction. A Motorized stirrer is mounted for uniformity of temp. of the bath. Digital temperature controller cum indicator controls the process.

Description / Specification of Is Corrosion Test Chamber

We are involved in offering a wide range of Is Corrosion Test Chamber to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Is Corrosion Test Chamber. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

The Global Corporation Salt spray Corrosion Cabinet is used to test the corrosion resistance of protective lacquer coating on ferrous &non ferrous material. 
Made of perfect inert material (Acrylic) 
Suitable for panels of size 150mm x 100mm x 1.25mm
The panel will be placed at an angle of 15° on Acrylic
The panels are equally placed at a distance of 20mm from each other as well from the walls.
 

The Universal Penetrometer is employed for testing a wide variety of materials as measured by penetration of weighted needles or cones. Main applications are for bituminous materials, but waxes, greases, foods, and pharmaceuticals are among other products tested. Penetration is read from a 5" (127mm) diameter indicator dial of 0-400 divisions, each representing 0.1mm of penetration. Global offers heavy-duty units for manual and automatic use and a lighter, portable model for field work or for users with limited work load or limited budget. All meet ASTM and IS standards when fitted with proper needle or cone.

Description :- 
Unit consists of steel balls and brass rings as per IS specified dimensions, ball guide for ball centering, support for the ring, all mounted in a beaker which is provided with magnetic stirrer and a Immersion heater to heat the liquid inside. Temperature is maintained with the help of a programmable digital temp. Controller provided with PT100 sensor to achieve 5 degree C/min. temperature rise.
 

Types :- Kinematic viscosity bath (As per IS: 1206 (part III) - 1976)
For Bitumen Emulsion for Roads (Anionic type): the instrument is basically used to cover the standard of physical & chemical requirements of bitumen emulsion (Anionic type) for roads. The apparatus consists of oil tubes made entirely of brass material As per laid down dimension .the oil tube is housed in cemme in a cylindrical SS bath with Electrical heating coil & Stirring arrangement & timer .A receiver flask of 60ml is kept at bottom just below Drain of oil tube .a sprit level is given along with the apparatus to maintain the perfect level of whole instrument .the instrument is mounted on a powder coated CRCA platform for easy accessibility .By following the test procedure laid down in above is standard gives perfect result .For measuring viscosity by say bolt furol method.

All - Glass water distillation is a unique & intelligent Water distillation unit. The unit incorporates all Borosilicate glass parts, viz, Jacketed condenser, glass boiler, quartz silica tube, automatic water level tube etc. The heating element is ceramic bobbin heater with Nichrome heating wire. The unit has ultra unique feature for automatic water level maintain by solid -state device. It gives audible alarm when the water level is insufficient. The distillates of unit have very low conductivity (less than 1 mho). The company has two model viz, 1.5 liters/hr distillation water output for continuous run & 4.5 liters/hr capacity. Both the unit comes in 3phase/single phase electrical power supply model. The whole unit of the system is housed in power - coated GI sheet with excellent look. The unit is totally hassle & maintenance free with intelligent & user friendly.

Construction :-
The unit is Laboratory type, with a double walled construction. The Inner Chamber is made of Stainless Steel (SS-304) 22G. The outer chamber is made of GI / CRCA, with powder coated finish in two tone colour (Stainless Steel Buffed finished outer chamber can also be provided on request). Glass wool insulation of 65mm is present in between the walls to avoid heat dissipation. The Control panel is located at the top of oven. The heater compartment is at the bottom. A Flush door fitting coupled with virgin silicon square rubber gasket of 15mm & special lock and handle arrangement for locking the door is provided for perfect sealing of chamber. The Tray is made of GI mesh, Crimped and of size ¾ ”x 12G wire thickness with stainless steel Border. The spacing between the shelves is 4”.

Highly stable viscosity bath temperatures.
Digital measurement and display.

The Viscosity Bath is designed to simplify ASTM D 445; IS-1206 (Part III)-1978 kinematic viscosity testing. A top-mounted controller keypad permits quick entry of bath set point temperature while a sophisticated microprocessor controls the bath heating and stirring. To further enhance the input, the unit accommodates up to a maximum of six individual capillaries.

The HVB features a measuring range of 5ºC to 230ºC and can be used with mineral oil, silicone oil, or water as the bath media. Bath

temperature is displayed on a bright, easy-to-read digital display. In addition, the unit features a built-in over-temperature circuit and bath liquid level detector to automatically cut heater power in the event of thermal runaway or insufficient bath media.

Construction :-
The heating plates are rectangular in shape and made up of MS Cast Iron plates with Groves for Heating Coil (SS Plate can also be provided on request) .The top plates overhang by supporting MS pillar which allows air insulation between plate and control Compartment to keep it cool. Long lasting Nicrome Heating wire with ceramic Beads are used for the heating process. A choice of Energy Regulator / Digital Temperature controller is provided.

Laboratory Muffle Furnace of Max Temp :- 
1200 c Working temp: 1150 degree c. MS body with epoxy powder coat finish & door with Heat resistance hand.

Double Decker type construction with muffles body at top & control box at bottom with 1"solid spacer in between Coil type Heater of Kanthal wire wounded on muffle with cerewool blanket &Brick insulation of 4" to have skin temp. of furnace less than 50 C Hinge door with lock system to open/close muffle Furnace. The control panel: At base of furnace with controller, stand by solid-state fuse with Cr/Al Thermocouple. Microprocessor based temperature controller cum indicator controls heating

T/C M/C basically used for checking Damage to Conductor. The apparatus consists of thick Acrylic Sheet table top compact body with locking door. The test specimen is fitted at top of unit with provision for height adjustment as per new amendment &Circulation. Double ball bearing shaft coupled with constant speed of 10rpm-geared motor to rotate the circular acrylic disk. The geared motor is Electrically coupled with the timer of 15mints. As per demand of the IS specified test. The different weights in cylindrical shape & bushes as per IS specification is given with the unit. Our GMP model unit can accommodate 6A / 16A / 32A switches.

Cord grip test apparatus As per IS 38541997: Clause 20.9

The apparatus is made up of MS powder coated body with mechanical stroke counter, Bakelite /thick Acrylic circular off-center wheel. Acrylic flap with guide Aluminum pulley attached to it. A standard weight as per IS specification is attached to a cord to check the cord mechanical retention strength as per amended IS specification.

Description / Specification of Compression Test Apparatus

We are involved in offering a wide range of Compression Test Apparatus to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Compression Test Apparatus. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Flash Test Apparatus:Is 3854:1997,Clause 16.3

It's used for routing test for insulation resistance & Electrial strength of switches, insulation material etc. as well as on line measurement of applied AC voltage, current & watt to load & other electrical parameters. The Flash unit consist of thick Acrylic sheet to prevent any leakage electric shock during H.v test .The compliance is check between line parts of pole & body so that no metal parts /foil etc. should be present in moulded body.

As per IS 1293 - 1988 clause - 21. The socket outlet are mounted in normal used & the pulling force is applied in the direction similar to the normal used. The socket outlet is held in a vertical plane & the pulling on the projecting part of it downmost . The applicable force should be applied as per table given below to have necessary withdraw the plug from the socket outlet.

Triple walled construction having inner 304 SS chamber & exterior of MS epoxy powder coated finish/ of SS. Glass door along the main door, magnetic gasket & lock .A perfectly designed cooling & heating system to operate any temperature from 10degree c to 60 degree c with temp. Accuracy : 1 degree C. Humidification through steam flow on circulation Humidity levels from 40% RH to 95% RH & Humidity Stability : +3% to - 3% Rh. The Microprocessor based PID controller, controls the temp. & Humidity at required set level. The controller is simple to set direct Humidity % RH &temperature on digital indication. A glass wiper on glass window for eliminating condensation. One Fluorescent Tube at inner chamber is provided for illumination. A perfect back side blower motor air circulation for uniformity of temp. & Humidity. On demand Software based Microprocessor programmable PID controller with Time proposnate with data logger & cyclic timer, Real clock Battery Back up & RAM memory 8K x 8 capacity printer & Pc interface controller with PT 100 Process Controller can be provided with the unit at Extra cost. Our technology of system is fully controlled, Easy to handle, user friendly, intelligent & Reliable. With some minor changes same chamber & technology can be incorporated to build Environment test chamber & plant growth test chamber.

Unique ball pressure is to used to check the minimum gravitational force at a specific point under constant temperature & time duration to check the quality of raw material of electrical socket as per IS- 1293 : 1988 clause 24.1.2 . The ball pressure is completely made up of SS-304 dully polished with centre pivot of 5 mm ball (2.5 mm radius) to exert a pressure of 20N on the surface of insulating material. The whole unit is being kept with sample in a heating oven having temperature of 125 deg. C +/ - 5 deg.C & is kept for one hour duration after the heating is over.

Our steam units are fully automatic intelligent, user-friendly system. Simply switch on & after initial wait the correct bathing temperature is automatically reached. The unique feature includes: GI powder coated enclosure, stainless steel inner shell, argon welded, and solenoid valve at water inlet controlled by solid state water level circuit. The unique pre-heat of cold water at inlet technology for uninterrupted steam supply .The safety devices includes mechanical pressure release valve of 15psi,Automatic cut off for heater at dry run/insufficient water inside bath. Digital temp. Controller cum indicator controls the steam bath room temperature.

Global Corporation make unique & compact trouble free GMP model sauna bath generator. The sauna heat is generated by electrically operated finned SS heater & achieves a temperature of 70-80degree c. The heat is exploded from the unit by air -blower fan for uniform air circulation. The unit generator of heat is made of outer mild steel powder coated enclosure. The inner is made of stainless steel sheet, Argon welded. The sauna bath Room temperature is controlled by Digital temperature controller cum indicator .The Sauna bath room temperature can be fully adjusted to the user's comfort level with auto shut-off at pre -settable room temperature.
 

Construction :-
Industrial Tray Drier having cross-directional horizontal air-flow system by flange mounted motorized fan for rapid drying of material kept inside. Inner chamber made of MS and coated with heat resistive silver paint or SS-304 (20G).

Temp Range :-  Ambient to 250ºC.

Controls :- 
Unit is controlled by microprocessor based auto-tune PID controller with PT-100 sensor located at the top of oven. Safety thermostat in series with digital temperature controller given as a fail - safe.

Heater :- 
Heater is of SS, finned, hot + cold zone type star connection mode for 3ϕ and terminal taken out of oven from the sides with proper cover for easy accessibility. Air vent provided at the top of oven.

The GMP-GC-06 is a unique design model which offers complete protection to welding electrodes by preventing deterioration caused by absorption of moisture (due to the electrodes being hygroscopic in nature). This oven with its thermostatic control/energy regulator / digital control could be used as a dual purpose cabinet. If set at a lower temperature it could be us ed as an electrode storage cabinet, while at a higher temperature it could be used for the recovery of electrodes which might have become wet. The construction is double walled, insulated mild steel cabinet. The oven is duly powder coated and the inner chamber has a heat resistive silver paint with 2” thick high density glass wool insulation in between the walls.

Description / Specification of Drum Heater

We are involved in offering a wide range of Drum Heater to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Drum Heater. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Bakery Oven

We are involved in offering a wide range of Bakery Oven to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Bakery Oven. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Styro Foam Cutter For Oncology

We are involved in offering a wide range of Styro Foam Cutter For Oncology to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Styro Foam Cutter For Oncology. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Cooling Plate For Styro Foam

We are involved in offering a wide range of Cooling Plate For Styro Foam to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Cooling Plate For Styro Foam. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Low Melter Alloy

We are involved in offering a wide range of Low Melter Alloy to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Low Melter Alloy. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Hot Plate For Orthopaedic Mould

We are involved in offering a wide range of Hot Plate For Orthopaedic Mould to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Hot Plate For Orthopaedic Mould. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design