STORAGE VESSEL FOR PHARMA, OIL, COSMETIC & CHEMICAL INDUSTRY :

• MOC of tank : SS 316 ,SS 316 L, SS 304 or MS as per customer requirement.
• Jacket provided as per customer requirement/optional.
• All pipes, pipe fittings and valves are of SS 316, internally electro polished, with tri-clover ended joints.
• Available in all capacities i.e. 10 to 5000 ltrs. As per customer requirement.
• Available in Horizontal & Vertical shape as per client requirement.
• Ensuring hygiene and maintaining a sterile environment, products in these storage tanks remain free from contamination.
• It is widely used in Pharma, oil, cosmetic & chemical industry.

Operation

• Homogenizer is provided as an optional attachment based on customer preference.
• The homogenizer attached at the top, bottom or in line with re-circulation arrangement colloids the product to a fine paste due to high shear speed and milling through
• perforated holes.
• Creating fine stable emulsion is very essential in the process of cream making.
• It creates high shear force to break the particle size to microns.
• Higher the shear energy created, lower the particle size resulting in soft cream.
• The stator houses the rotor driven by suitable inline motor.
• Rotor shaft fitted with the double cartridge. Mechanical seal of TC/TC seal face.
• Mechanical seal is provided with cooling water arrangement.
• Interlock to stop the motor if the cooling water is not circulated.
• Complete product contact parts are made of SS 316 l and other parts of SS 304.
• Inner parts are finished to class 4b (mirror) finish and all other 2b (satin) finish.
• Capacity: 0.25 HP to 15 HP.

Pressure vessels are used in the Membrane filtration system. While pressure vessels are used to transfer the product to the filter under Nitrogen pressure, the filling vessels are used to collect the filtered sterile solution. They work as buffer vessels in the product filling room.

Technical Specification

• Top & Bottom Dish Ends.
• Jacketed vessels ( Optional).
• Diaphragm type Pressure Gauge.
• Sterile Safety Valve.

Pressure vessels are used in the Membrane filtration system. While pressure vessels are used to transfer the product to the filter under Nitrogen pressure, the filling vessels are used to collect the filtered sterile solution. They work as buffer vessels in the product filling room.

GEM’S Superfine Quality Multi Column Distillation Plant is based on the principal of interstage heat exchange to produce pure pyrogen free sterile distilled water

A part of feed water on the inside of the heat exchanger tubes is converted to steam because of surface film evaporation. A predetermined minimum amount passes through the column which causes both rapid heating of feed water and rapid cooling of boiler steam, therefore creating vapours at high velocity under pressure. This vapour rising through the entertained section is subjected to a 180 turn caused by centrifugal force.

Due to spiralling motion, the pure vapour rises upward through a vertical section outside the heat exchanger. Due to this unique centrifugal seperation technique, the impuritites such as endotoxins and pyrogen are removed. The purified vapour (steam) then moves towards the upper portion of the column.

The pure steam in the first column serves as the source of heat for the second column. This process is repeated in all the 4 to 5 columns or more. Each column is working at a slightly lower temperature and pressure than the proceeding one. The heating energy requirements are reduced by 70% as external heat is required to vapourise only 30% of the feed water.

For pasty products of medium tohigh viscosityand withlow flow ability.

For products, difficult to be pumped because of their low flow ability and high thixotropic characters that are required to be discharged from Production vessels for feeding Production Machines.

Frame made of welded MS steel plates provides a study construction.

The construction is simple, all operational controls are easy to reach and simple to operate.