• Made of UniBloc Technology for stable temperature characteristics, excellent response time and stable corner-load performance.
• AUW-D dual range analytical balances are the first five decimal balances with the advantage of UniBloc one-piece force cell technology.
• The AUW models comprises of following features.
• Fully automatic calibration by temperature detection.
• Fully automatic calibration at user pre-set times.
• Span calibration at any time. (touch key calibration).
• Windows Directs, handiest data transmission to a computer.
• Piece counting and unit conversion.
• Universal timer.
• User-friendly weighing chamber.
• Easy level adjustment
• Metal housing
• Backlit display.
• Analog Bar Graph display.

The Unit consists of a compact rectangular box section of light metal alloy, housing the heating elements and built-in energy regulator controls.
The flexible and elastic heating elements ensure closer contact with the flask surface and even distribution of heat over the contact surface which minimises the breakage of glassware. High thermal insulation of glass wool backing the heating elements, minimises the heat losses.
Every flask recess is provided with a pilot lamp and a regulator or toggle switch.
The built-in energy regulators, where provided felicitate good control of temperature.
Supplied With Clamps, Boss-Heads with two vertical and one Horizontal rods
Neon lamp indicators, toggle switches. Energy regulators,
Chord and plug for 230 V, 50 c/s., AC. [WITHOUT GLASS PARTS] .

Highly Stable & Accurate
Cell Constant Adjustment Facility
31/2 Digit Display
Available Laboratory & Field Models
Automatic Temperature Compensation Facility
Rugged and Reliable design
Measuring Ranges 0-200µS/cm, 0-2mS/cm, 0 to 20mS/cm, 0 to 200mS/cm & 0 to 1000mS/cm.
Suitable to operate on 230 Volts, Single phase, 50 Hz.
Supplied complete with Conductivity Cell, Operation Manual & Dust Cover

Water proof model with GLP, RS232, IrDA, Multiparameter display.
Can measure pH / mV / conductivity / TDS / Resistivity / Salinity / Dissolved Oxygen / ° C / ° F.
Simultaneously measures and displays four parameters    
Ion-measurement capabilities with 3-digit resolution    
Selectable multi-point calibration for more accurate conductivity measurements or single-point calibration for quick, convenient calibration with no mistakes    
Measures 90.00mg/L in DO concentration and 600% in DO saturation—one of the widest dissolved oxygen measurement ranges offered in the handheld market today    
Salinity, Temperature and Pressure Compensation—accurate readings under varying conditions    
Recorded readings individually stamped with time and date in GLP compliant format
Auto-logging meter saves readings automatically within seconds to prevent data loss
4 X 1.5 V "AA" Alkaline batteries or 9 V DC adapter, 500 mA

Microprocessor based basic pH Meter.
Push button Calibration with auto buffer recognition upto 3 points.
Self-diagnostic messages.
Electrode characteristics (pH slope / offset) can be viewed.
Measuring range 0.00 to 14.00 pH. With a resolution of 0.01pH.
Automatic / Manual Temperature compensation from 0 to 100° C.
Custom Dual LCD Display.
Suitable to operate on AC / DC 9V Adapter(220 VAC, 500mA)

Extremely useful for medical and agriculture laboratory use
Can measure sodium, Potassium and Calcium.
All element measurement in single aspiration of the sample
Automatic Optical Management of filters
Calibration curve programmability using maximum of 5 standards.
Data processing through curve fitting techniques – least squares, quadratic
Multiple calibration curves saving facility
Samples data storage facility
Printer Attachment Facility
Measures in ppm, mg, % and meq
Help key available at each and every operating step

Highly Reliable, Accurate, Rugged and Easy to Operate Instrument to Determine Absorbance, %Transmission, Concentration & K Factor
Printer Interface
Covers 190 to 1000 nm
4 Position Cuvette Holder
16 X 2 Line LCD Data Display
4 Digit Wavelength Display
RS - 232C Computer Interface
µP based wavelength selection
Spectral bandwidth : 2nm.
Accuracy : + 0.5nm.
Photometric Range % T : 0 to 100%    Abs. : 0 to 1.999    Conc. : 0 to 1.999

Complete stainless steel body.
Fitted with pressure gauge upto 20 psi.
The Unit has spring loaded safety valve for pressure adjustment and a dead weight safety valve.
Autoclave is hydraulically tested upto 30 psi.
The unit is fitted with electrical fittings, chord and plug.
Suitable to work on 220/230 Volts, AC supply.

The Unit consists of a compact rectangular box section of light metal alloy, housing the heating elements and built-in energy regulator controls.
The flexible and elastic heating elements ensure closer contact with the flask surface and even distribution of heat over the contact surface which minimises the breakage of glassware. High thermal insulation of glass wool backing the heating elements, minimises the heat losses.
Every flask recess is provided with a pilot lamp and a regulator or toggle switch.
The built-in energy regulators, where provided felicitate good control of temperature.
Supplied With Clamps, Boss-Heads with two vertical and one Horizontal rods
Neon lamp indicators, toggle switches. Energy regulators,
Chord and plug for 230 V, 50 c/s., AC. [WITHOUT GLASS PARTS] .

Double walled construction.
Inner SS & Outer M.S. Powder coated.
Temperature Ranges from 50 to 250°C + 1°C.
Temperature controlled by Capillary type thermostat.
Glass wool Insulation for the chambers and doors.
Suitable to operate on single Phase, 230 volts, 50 Hz

Combination Ph Electrode
Buffer Tablets 4 Ph & 7 Ph
Operation Manual
Buffer Bottles (4 & 7 Ph)
Temp Probe (101 E)
Dust Cover
Electrode Stand

The Outer shell is made of Mild Steel sheet with powder coat finish.
Top Working space is made of Stainless Steel Plate (or) Mild Steel Plate.
Nicrome Heaters provided immediately beneath the working surface.
The Unit is fitted with Energy Regulators for regulating the heat.
Suitable to operate on single Phase, 230 volts, 50 Hz

Double walled construction with Inner Stainless Steel and Outer Mild steel with powder coat finish.
Temperature ranges from 5° C above ambient to 100°C and is controlled by thermostat.
Glass wool Insulation between the walls.
Top of the water bath provided with hole of 3” diameter with concentric rings.
The bath is fitted with ISI marked immersion type water h

Anemometer Cup Counter is manufactured as per IS:5912:1970 for measuring wind velocity.
The instrument has a cup wheel comprising of three conical cups with beded edges and free to rotate in a horizontal plane.
The Cup wheel spindle is connected by worm gearing to a revolution counter mounted inside a water proof housing.
The gear ratio between the Cup and Counter Spindles is so chosen that the run of the wind is shown directly in Kilometers and tenths.
Each of the three rotor cups shall have an internal diameter of exactly 127.0mm and be semi conical in shape.
This instrument measures total run of wind passing at the point of observation through Mechanical counter of the range 0 to 9999.9km

The portable anemometer provides fast, accurate readings, with digital readability and the convenience of a remote sensor separately.
Multi-functions for air flow measurement m/s, km/h,. ft/min, knots.
A sensitive balanced vane wheel rotates freely in response to air flow.
Built-in low battery indicator.
Data Hold function for stored the desired value on display. Large LCD display, easy to read.
Measuring Range : 0.4 to 30.0m/s.
Suitable to operate on 9V Battery .

Fortins Barometer with Metric and English system scales reading 25” to 32” and 64cm to 81cm with reactors behind scale and cistern.
Vernier operating with rack and pinion, reads 0.1” and 0.1cm, with brass pipe and brass fittings, with borosil glass tube, fitted on wooden base.
Supplied without Mercury.

This instrument is manufactured as per IS: 5900-1970.
The humidity sensor consists of a bundle of Human Hair held between two adjustable jaws, the whole assembly being mounted on a hair movement plate.
The variations with length of the hair stands due to changes in the relative humidity are measured by the displacement of the centre of the hair strands transmitted by a lever and a pair of cams to the pen arm so that the movement of the pen is a linear function of the relative humidity.
Available with mechanical clock .

This Pan Evaporimeter is manufactured as per Is:5973 :1970.
The Pan is manufactured from pure copper, duly tinned and epoxy pointed and tested for water leak proofness.
The stilling well and thermometer clamps are manufactured from Brass.
This is supported on wooden platform and covered with reinforced chickon.
Measuring Jar is manufactured from transparent Acrylic.
This Pan Evaporimeter is also available in galvanized Iron as per customer's requirement.

Description / Specification of Stevenson Screen

We are involved in offering a wide range of Stevenson Screen to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Stevenson Screen. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Thermograph

We are involved in offering a wide range of Thermograph to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Thermograph. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Double walled construction with Inner chamber made of Heavy Gauge Stainless Steels sheet (SS 304) and outer made of polished stainless steel sheet with Air insulation.
Lid is made of stainless steel plate with pedal lifting arrangement and is tightened all-round by wing nuts,
Moulded joint less gaskets are made of Neoprene rubber.
Sterilizer is hydraulically tested upto 40psi.
Autoclave Lid is fitted with pressure gauge, Air/steam release cock, spring loaded safety valve which can be set at any selected point from 10 psi. to 20 psi +/-3 psi, and drain.
ISI marked immersion heating element heats the water.
Suitable to work on single phase 220 Volts, 50 cycles AC supply

Constructed out of Galvanized Steel Epoxy Powder coated (or) Stainless Steel (SS 304).
Suitable for general microbiological work with agents assigned to Bio safety levels 1,2 or 3.
Incorporates HEPA filters of minimum collection efficiency 99.99% for particles of size down to 0.3 micron.
The Front Panel slope allows for maximum visibility into the work zone.
Worktop made of SS 304.
The clear polycarbonate front sash provides greater operator protection from harmful UV rays.
The front ash is counter balanced for up and down movements.
30% HEPA filtered exhaust air leaks into the laboratory & 70% HEPA filtered air comes down after filtration into the work zone.
White light and UV lights are located outside of the down flow air stream to ensure optimum airflow uniformity.
The contaminated air is initially pre filtered before recirculation and the contaminated air inside the work zone from the common plenum is connected to the blower chamber for exhausting through exhaust HEPA filter

Double walled units with inner Stainless Steel and outer Mild Steel with powder coat finish.
The unit is highly insulated by PUFF.
Temperature range from ambient to -20° C (or) -40°C and is achieved by hermetically sealed compressor.
Temperature is controlled by Digital Temperature Controller cum Indicator.
Compressors are Eco friendly and CFC free.
Suitable to operate on 220/230 Volts, 1 ph, 50 Hz, AC supply

Double walled construction.
Inner SS & Outer M.S. Powder coated.
Temperature Ranges from 50 to 250°C + 1°C.
Temperature controlled by Digital Temperature Controller cum Indicator.
Forced Air circulation fitted in the backside maintains uniform temperature throughout the chamber.
Glass wool Insulation for the chambers and doors.
Suitable to operate on single Phase, 230 volts, 50 Hz

Designed to meet the requirements of US federal Standard 209B (BS 5295) providing particle free air to meet class 100 (Class conditions).
Cabinets is fabricated out of commercial plywood.
Interior surfaces are epoxy painted for its longer life.
Working table is made of Stainless Steel top.
Side panels are made out of thick transparent plexi glass.
Unit is fitted with pre-filter and HEPA filter.
Air is drawn through pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining al air-borne particles of size 0.3micron and larger.
Using a dynamic machine, the blower and motor assembly is statically & dynamically balanced.
Motor of 1/5 HP capacity operates with minimum noise level.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with SS table top, transparent Front Door, Pressure Manometer, Built in UV germicidal light and cock for gas, air or vacuum line, HEPA filters and pre-filter.
To work on 220/230 volts, AC supply

Made out of tubular Aluminium pipe duly painted for longer life.
Each rack of size 48” x 21” (depth) is covered with thick unbreakable plexi glass.
Distance between each rack is 15”.
Each Rack is fitted with 4 fluorescent tubes.
Electronic chokes are fitted to unit in order to avoid heat dissipation inside the room.
To work on 220 / 230 volts AC supply.
Fitted with Individual ON/OFF switch for each tube.
Fitted with 0-24 hrs. programmable timer

Microprocessor display with continuous visual update.
Reliable versatile performance with full field support.
Select the programme mode and duration.
Feature touch key board with digital display for programming.
Programmable 12 stage timing sequence with each step 1 minute to 16hrs.
Delay action from 1 hour to 99 hours.
Safety Device for Tissue Protection.
Temperature controller of wax baths operational in limits in 10°C to 80°C.
Digital display for adjusting time sequence, temperature setting with battery back-up.
Precision gear mechanism for trouble free working.
Each station with a capacity of approximate 1 liters / 2 Ltrs.
With automatic agitation.
Power supply 200/230V AC, 50 Hz

High performance built, versatile microtome manufactured as per international standards for accurate, consistent frozen sectioning at diagnostic and research laboratories in the fields of pathology, Histology, histo chemistry, bio chemistry, forensic science, biological research, veterinary studies, marine biology, bio sciences,etc.
Well balanced retracting microtome housed in a stainless steel chamber specially designed for low operating temperature.
Can cut as thin as 1 micron section.
Robust feed system virtually delivers flat, uniform undistorted and consistent sections.
All operations are frictionless and vibration free.
Dynamic modular design provides easy, simple and comfortable operations.
Temp. range upto -30/-40° C.
Section size : 40 x 55mm.

Cuts section as thin as one micron (1-50microns). The total excursion of the feed is 28mm.
The object clamp is big enough to hold the block32mm wide and 17mm high.
The microtome is fitted with a strong knife holder which can be adjusted to different ranges of sectioning angles.
Fitted with automatic feed release safety device.
Automatic lock for ensuring safety device.
Sturdily built with a streamlined body.
Surface grinding on base, horiziontal, vertical and inclined slide for smooth and accurate motion.
Ratchet wheel, CAM and CAM weight are made of GUN METAL.
Standard accessories includes 120mm Razor, Object holder, knife holder tightening key, dust cover and oil can for lubrication

Description / Specification of Microslide Cabinet

We are involved in offering a wide range of Microslide Cabinet to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Microslide Cabinet. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Double walled construction.
Most suited for preparing wrinkle free tissue specimens.
Inside is made up of aluminium and outside of M.S. sheet duly powder coated.
Temperature range from ambient to 80° C + 0.5°C is controlled by Thermostat.
Fitted with indicators for Mains and Heat.
Supplied with chord and plug suitable to operate on 230 Volts, single Phase, 50 Hz.
Inner chamber size : 200 (dia) x 110mm (depth).

FOR DETERMINATION OF CALORIFIC VALUE OF LIQUIDS & SOLIDS
This Digital Bomb Calorimeter provides a simple and inexpensive method for determination of heats of combustion of organic matter and the calorific value & sulphur contents of solid & liquid fuel.
The outfit supplied is complete for analysis as per the method recommended by British Standard Institution BS 1016.
All parts of the outfit have been finished and tested according to the specifications laid down by Institute of petroleum and British Standard Institute
Supplied complete with Certified Bomb, Calorimeter Vessel, Water Jacket (with or Without Puff insulation),  Stirrer,  Electronic Firing unit with Digital Beckman Thermometer, Printer, Nichrome wires, threads, Benzoic acid of know calorific value, Crucibles and all accessories.
Suitable to operate on 220V, single phase, 50 Hz AC Mains

This apparatus is used for determination of flash point and fire point of petroleum products open cup flash above 80º C as per specification IP 36 and IS : 1448 (P:69) 1969.  The apparatus consists of a cup, heating plate to specific dimension thermometer clip and test flame attachment with swivel joint for passing over test liquid surface in the prescribed manner.
The Instrument having Oil Test Jet / Gas Test Jet.
Heating is controlled by means of energy regulator fitted to the apparatus. 
Suitable for operation on 220 Volts, 50 cycles, AC circuits.

Made in accordance with specifications as IP:24, 123 & IS 1448(P:18)1967.
This apparatus is used for determination of distillation characteristic of Petroleum Products.
The instrument consists of metal shield fitted with asbestos board to support distillation flask with GEARED height adjustable device.
It has slide for vapour tube and lining having glass window for Clear view of inside objects.
The condenser bath is provided with Mild Steel black painted stand (without glasswares) electrically operated on 220 volts AC mains

his is a  high precision FULL VISIBILITY Bath with S.S Tank.
The outer casing is made of Aluminium and pointed in a pleasing color.
A Stirrer/pump keeps the temperature of the bath liquids uniform throughout.
The heaters are immersed from the top of the bath.
The temperature is controlled by Digital Temperature Controller cum Indicator.
Temperature ranges from 5°C above ambient to 120°C.
Suitable to operate on single phase,  220 Volts, 50 Hz

These viscometers are designed for viscosity tests of petroleum products. 
They confirm to requirements of IP 70 (former). 
Two adoption of Red Wood Viscometer are available No.1 for liquids having Red wood flow 20 to 2000 seconds and No.II for liquids whose flow time exceeds 2000 seconds.  The complete out fit comprises Stainless Steel bath with electrical heating arrangement by Immersion Heaters and controlled by Digital Temperature Controller cum Indicator.
The apparatus comprises tap, silver plated coil cup with precision stainless Steel jet, cup cover, ball valve, thermometer-clip, Stirrer and M.S. Sheet stand with leveling screws.
Temperature is uniformly distributed throughout the chamber by Stirrer.
Suitable to operate on 220 Volts, 1 ph, 50 Hz

This apparatus is made as per IP34, ASTM D – 93 and IS 1448 (Part I) 1270 (P.21) and IS 1209-1953 method B.
Used for finding out Flash Point above 70°C and below 300°C.
The instrument having Oil Test Jet (or)  Gas Test Jet Flame Device, stirrer with flexible shaft.
The assembly rests in Air Bath which is covered with Dome shape metal top.
The cup is fitted with insulated handle and locking arrangement near cup flange.
Electronic Temperature Controller with Automatic dipping cycle with Remote control Oil (or) gas jet.
Suitable to operate on 220 Volts,  1 phase, 50 Hz.

The furnace is designed to accommodate combustion tubes of
dimensions 17mm x 22mm x 600mm. 
Tubular combustion furnace unit, heated by 2 Nos. of Silicon Carbide heating elements suitable for 1300 C.
Control panel with a step down transformer, Ammeter, Voltmeter, Temperature is controlled by Digital Temperature Controller Cum Indicator from50 deg C to 1300 deg C. +/-1 deg C.
Supplied complete with All glass parts, kanthal scoop, instruction manual with pressure temp. correction chart, combustion tube, rubber tube, clamps for heating elements, combustion boards and double stage regulators.

Description / Specification of Digital Lux Meter

We are involved in offering a wide range of Digital Lux Meter to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Digital Lux Meter. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Flexible Arm Illuminated Magnifier

We are involved in offering a wide range of Flexible Arm Illuminated Magnifier to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Flexible Arm Illuminated Magnifier. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Accurate determination of Melting Points, Melting range, Boiling points & Flow points.
Compact design with digital display of Temperature.
Electronic controller for precise setting of Heating rate.
Silicon Oil bath with built-in magnetic stirrer and highly sensitive Pt 100 temperature sensor.
Glare free illuminator & large magnifier for strain free observation.
Temperature range of the apparatus is from 2°C above room temperature to 300°C.
Press button is provided which is to be pressed when the desired change is noticed in the sample under test.
The temperature reached at that stage is then held on the readout, till the ‘CLEAR’ button is pressed

Description / Specification of Muffle Furnace

We are involved in offering a wide range of Muffle Furnace to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Muffle Furnace. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Opaque glass screen with 90 ° cross line, fitted on rotary ring operated by knob.
Co-axial optics with built in half reflective mirror.
Standard optics of 10x, 20x and optionally 5x / 50x/100x can be fitted.
Working stage of size 160 x 160mm
Can measure samples of size 50 x 50mm.
Linear measurement is done by 0-50mm micrometer head with zero adjustment
Focussing 100mm.
Contour & Surface illumination by halogen lamps.
Unique rigid pedestal system stand facilities vibration free handling of component.
Cooled by Fan

Description / Specification of Tap Density Apparatus

We are involved in offering a wide range of Tap Density Apparatus to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Tap Density Apparatus. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Tray Drier

We are involved in offering a wide range of Tray Drier to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Tray Drier. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Designed for conducting various experiments under different parameters of temperature, humidity etc.      Atmospheric environment is simulated within the laboratory to perform different experiments without going into the field.
Double walled chamber.  Inner Stainless Steel and outer Mild Steel sheet with powder coat finish.
Insulation by fine glass wool.
Double door system with Inner Glass door and door operating lamp for illumination.
Temperature ranges from  +10°C to 90° C. 
Temperature is controlled by Digital Temperature Controller cum Indicator.
Humidity ranges from atmospheric condition  to  90% +  3% and is attained by steam generated from the SS Reservoir tank fitted at the bottom.
Humidity controlled by Humidistat and is indicated by Dial type Hygrometer.
Illumination for day light effect is achieved by Fluorescent tubes equally distributed inside the chamber and is controlled by 24 hours timer.
Air Circulation Fan maintains temp. uniformity in the chamber.
Suitable to operate on single phase 230 Volts, 50 Hz.

Made out of 19mm thick waterproof plywood, exteriors covered by 0.8mm thick laminated sheets.
Interiors coated with epoxy paint over a suitable primer base. 
The inner wall of the working chamber is covered with epoxy coated asbestos.
Working table will be covered with acid proof ceramic tiles with sink & gas cocks
Three pin sockets with switches provided for electrical connection inside the hood.
The exhaust system consists of Centrifugal impeller with industrial motor

Robust Construction, Double walled chamber with Inner SS and Outer MS with powder coat finish.
Double door system with inner glass door.
Temperature Ranges from 5°C to  60°C.
Shaking Range                   :  50 to 250 rpm.
RPM                                      : Digital RPM meter
Speed control                    :  Variable speed control knob
Temperature controller   : Digital Temp. Controller Cum Indicator.   
Accuracy                            :  +/-1° C
Shaking platform              :  Made of stainless steel

Description / Specification of Rotary Vacuum Flash Evaporator (Buchi Type) With Vertical Condenser

We are involved in offering a wide range of Rotary Vacuum Flash Evaporator (Buchi Type) With Vertical Condenser to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Rotary Vacuum Flash Evaporator (Buchi Type) With Vertical Condenser. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Vacuum Oven

We are involved in offering a wide range of Vacuum Oven to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Vacuum Oven. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

For determining the aggregate Impact value. 
The instrument consists of a circular base with two vertical guides.
The height of fall can be adjusted.
The hammer is provided with a locking arrangement. 
The hammer falls freely to the base and is removable for emptying:
Supplied complete with metal measure 75 mm dia x 50 mm height tamping rod as per standard.
Supplied complete with automatic blow counter

Description / Specification of Cube Compression Testing Machine (Single Pressure Gauge)

We are involved in offering a wide range of Cube Compression Testing Machine (Single Pressure Gauge) to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Cube Compression Testing Machine (Single Pressure Gauge). Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Cube Mould With Base Plate

We are involved in offering a wide range of Cube Mould With Base Plate to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Cube Mould With Base Plate. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Humidifier

We are involved in offering a wide range of Humidifier to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Humidifier. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Sieve Shakers

We are involved in offering a wide range of Sieve Shakers to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Sieve Shakers. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Vicat Needle Apparatus

We are involved in offering a wide range of Vicat Needle Apparatus to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Vicat Needle Apparatus. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design