Designed, engineered, supplied, installed, and commissioned 3,000+ Analyzer Systems globally to variousindustries like refineries, petrochemical, chemical,fertilize power and cement plants in India. Such projects involve, taking a turnkey responsibility for Application data review, Engineering, Construction,Integration and Installation in Analyzer House.

Product Quality/Blending
Supplied analyzer packages for blending of motor fuels (MS & HSD) consisting of NIR, total Sulphur, physical property, viscosity and density measurement. Analyzers delivered were complete with sample probes, sample conditioning, validation, and sample recovery systems.

Steam and Water Analysis (SWAS)
Expertise to provide solutions for accurate measurement and monitoring of Silica, Sodium, Phosphates, Calcium, Chlorides, pH, Conductivity, etc. to assure safety of Boilers and Turbines. Chemtrols' uniquely designed Boiler Blow-down systems, increases the efficiency of the Boilers.

CEMS Analyzer Systems

Optimum solutions to the measurement and monitoring of various pollutants like SO2,NOx, CO, CO2, NH3, HCI, HF, THC, Mercury, etc. Based on the vast experience gained in such systems, Chemtrols today provide solutions on technology platforms of either Dilution Extractive, Hot Extractive or In-situ measurement.

Dilution System
Sample is extracted and diluted with zero air in the probe. Since, dilution takes place within the probe, there is no need for a heat-traced sample transportation line.

Hot - Wet Extraction System
Sample is extracted from stack / duct through a heated filter. Blow back arrangement provided for cases where there is high dust load. Extracted sample is transported using heat-traced line to the sampling system.

In-Situ Instruments
An in-situ gas analyzer sits directly at the measurement point on the stack / duct. Both, cross duct and probe measurement techniques are available.

Also View

Process Analytics
Continuous Emission Monitoring Systems (CEMS)
Ambient Air Quality Monitoring Systems (AAQMS)
Flame and Gas Detection Systems (GDS)

Air Quality Monitor Device

Ambient Air Quality Monitoring Systems or AAQMS monitors the level of pollutants. From a single analyzer to complete turnkey systems (Both Mobile and Fixed) with shelters, hard wired or wireless data transfer to the pollution boards. Chemtrols provides a wide range of solutions to meet much of the Ambient Air Quality Monitoring demands.

Conventional Analyzers - SO2, H2S, NOx, NH3, CO, CO2, O3, and HC BTX Analyzer - Benzene, Toluene, and Xylene Particulate Monitoring -TSP, PM10, PM2.5
Sampling System Calibration Systems
Meteorological Sensors
Data Acquisition and Management Systems Analyzers designed according to US EPA regulations / equivalent regulations Ethernet connectivity for efficient remote access User-friendly interface with single button programming and large display screen
Well thought out of layout design for easy accessibility to components Report generation on an hourly / daily /weekly / monthly / yearly basis.

Flame and Gas Detector Systems
Flame and Gas Detection systems with/without SIL certified controlling & PLC conforming IEC 61508.

These systems are also supplied wireless communication using HART/ ISA 100/ GSM wireless.

SIL 2 certified Hybrid Sensors
SIL 3 certified Controllers
Point IR Gas Detectorss
Open Path IR Gas Detectors
Catalytic Detectors
Electrochemical Detectors
Metal Oxide Semiconductor Detectors
Flame Detectors
Photo Acoustic Detectors
Ultrasonic Gas Leak Detectors

Rotameter Manufacturer

Chemtrols offers a wide range of Variable Area Flow Meters (Rotameters) for various flow measuring applications; a convenient measuring instrument in field to monitor the flow at site in critical cooling, sampling and process applications. These are manufactured under technical know-how from M/s Heinrich Messtechnik GmbH, Germany. Proven design, long term usage references ensure complete safety and suitability of their usage in severe applications, backed up by all the necessary mandatory certifications

Flow Meters Manufacturer

Flow Meters:

Chemtrols is a solution provider of Flow Measuring instuments based on various principals to meet the application requirements of process plants, briefly summarized below.

Flow Measuring Sensors :

Besides, we also offer a wide primary Flow measuring Sensors like Orifice, Flow Nozzles, Venturi Tubes, Cone Flow Meters and Pitot tubes.

Description / Specification of Metering Skids For Gases And Liquids

We are involved in offering a wide range of Metering Skids For Gases And Liquids to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Metering Skids For Gases And Liquids. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Magnetic Level Gauges :

Chemtrols manufactures Magnetic Level Gauges for use in various industries. May it be Oil and Gas, Refineries, Chemical and Petro-chemicals, Fertilizer or Utilities, we have comprehensive and application specific solutions for measurement

Enhanced protection with metallic chamber
Simple and robust design with enhanced protection with metallic chamber.
Pressure and Gas-proof separation between chamber and display
Clear visibility of level from longer distances
Display of liquid level for aggressive, corrosive, toxic, Flammable or agitated media
Continuous Level indication with no power supply requirement.
Can be used in any industrial environment, hazardous or nonhazardous through use of suitable corrosion resistant materials
Designed for pressure ranged from atmospheric to pressurised conditions.
Designs for temperatures from Cryogenic : -200 C to +570 C.
Can be used for Interface level measurement
Transmitter output 4 - 20mA, switches for set points (optional)
Good reliability, suitable for high temperature and pressure

Temperature Monitoring System
Temperature :

Temperature elements like RTD and Thermocouples, Switches and Transmitters, with a wide range of connection fittings and Thermo-well assemblies and Specials RTD elements for winding and bearing temperature measurement.
Chemtrols offers a wide range of Temperature Instrumentation for Monitoring and Control of Industrial Processes with tailor made solutions, that fit best. May it be elements like RTD's and Thermocouples, or Accessories like the Thermowells and Fittings in various MOC's for demanding process applications, besides a wide range of Temperature Transmitters to complement them.
As a package supplier of Temperature instrumentation, we have the unique strength of designing and delivering optimum working solutions, for all your process needs. They include simple applications like RTD elements, Insets, Flexible RTD's, Skin Temperature RTD's, Silicon moulded Elements etc. Variations of RTD and Thermocouples in different diameters & sizes, Averaging thermocouple elements, Multi-point elements or Field/ DIN Rail/ Head Mounted/ Ex-proof certified Temperature Transmitters.

Mechanical Industrial Equipments
Gas Cooling and Conditioning Systems for Cement Kilns :

Gas cooling system for Preheater Top Cyclone.
Gas cooling systems for Preheater Downcomet duct.
Mill water injection systems for Cement Mill and Coal Mill.

Gas Cooling Systems Cooling Towers for Cement and Steel Industires :

High Pressure spllback systems
Hybrid systems with High Pressure and spillback lances.
Duel fluid systems with air mist lances.
Guaranteed downstream temperatures of 130 C without wet bottom formation.

Dust Suppression Systems :

Dry fog dust suppression systems.
Plain water dust suppression systems.
Sprinkler Systems for stock piles.

Oxygen Analysers :

Zirconia Oxygen Analysers for Online Oxygen Measurement in Stack Gas.
Based on Zirconia Measuring Principle.

Pressure Reducing and Desuperheating System

PRDS: Pressure Reducing and DeSuperheating System.

Steam PRDS is used for Steam Conditioning Services for reduction of pressure and temperature of steam. It is a combination of Control Valve for the pressure reduction purpose & atomizing nozzles, through which water is sprayed into steam for reducing the temperature.

Split PRDS: separate PRV (Pressure Reducing Valve) and DeSuperheater
Combined PRDS: Both PRV and DeSuperheater in a compact single unit

Combined PRDS helps to save the space and also cost of piping, as the unit is single and compact. For PRDS control system, there will be one Pressure loop and one temperature loop. Pressure control system includes pressure sensor, pressure transmitter, controller, I/P Converter, Pressure gauges, etc. Temperature control system includes temperature sensor, transmitter, controller, I/P Converter, Temperature gauges, etc. Spray water quantity required for the temperature reduction of the steam is controlled by separate spray water valve.

Desuperheater Manufacturer

Steam DeSuperheater is used to spray water into steam, so that it gets mixed, resulting in reduction in the temperature at the outlet.

DeSuperheater can be classified into two:
A. Non-Integral type DeSuperheater: DeSuperheater nozzle and water valve are separate units.
B. Integral type DeSuperheater: DeSuperheater is in-built with actuator, so that there is no need of separate spray water valve.

Split PRDS: separate PRV (Pressure Reducing Valve) and DeSuperheater
Combined PRDS: Both PRV and DeSuperheater in a compact single unit

Nozzles are also classified into:
A. Venturi type: where nozzle orifice is fixed irrespective of flow variation.
B. Variable orifice: where orifice area opening will vary according to the flow and pressure variations.

Control Valves Manufacturers

The CGV Series control valves are suitable for handling steam and water. The valve body is designed for smooth flow profile, which minimizes pressure loss and provides better Cv and rangeability.

Turbine Bypass Valves Manufacturer
Benefits

PRDS used in turbine bypass applications help to protect the turbine during start-up, power trip and also for part load generation. Turbine by pass valve prevent venting of steam into atmosphere and allow the steam to be dumped into condenser, so that energy can be saved to generate high temperature Boiler Feed Water.

Applications:

Thermal Power Plants and Cogeneration Plants
All process plants like Fertilizers, Petrochemical, Refineries, Pharmaceuticals, Sugar Pulp & Paper, Steel, etc.

Specifications:

Inlet Size: 3" to 20"
Outlet Size: 4" to 64"
Pressure class: ANSI 150# to ANSI 2500#
Material: A182F12 / A182F22 / A182F91 / F92
Rangeability up to 1 : 100
Actuator type: Pneumatic, Hydraulic, Electro-hydraulic, Electric.
Trim type: Multi stage with perforated cage type
Body spherical form, with transitions radially designed with surfaces nearly without marks.

Trunnion Valves Manufacturer
Manufacturing Facilities;

State-of-the art production facilities in Kundaim, Goa and in Pune, Maharashtra; spread over a lakh of sq. feet in aggregate
I SO, 9001-2008 certified operations.
Facility accredited under CE marking, ASME, U,PP and R Stamps as well as PED.
Facility and products approved by Global Engineering Consultants and Contracting companies.
Well-equipped testing and inspection facilities.
World class finishing and packagind processes
Well documented and appropriately preserved inventories.
And above all competent and caring human resources.

Manufacturing Facilities :

State-of-the art production facilities in Kundaim, Goa and in Pune, Maharashtra; spread over a lakh of sq. feet in aggregate.
I SO, 9001-2008 certified operations
Facility accredited under CE marking, ASME, U,PP and R Stamps as well as PED
Facility and products approved by Global Engineering Consultants and Contracting companies
Well-equipped testing and inspection facilities.
W orld class finishing and packaging processes.
Well documented and appropriately preserved inventories.
And above all competent and caring human resources.

Forged Steel Valves Manufacturer
Manufacturing Facilities;

State-of-the art production facilities in Kundaim, Goa and in Pune, Maharashtra; spread over a lakh of sq. feet in aggregate
I SO, 9001-2008 certified operations.
Facility accredited under CE marking, ASME, U,PP and R Stamps as well as PED.
Facility and products approved by Global Engineering Consultants and Contracting companies.
Well-equipped testing and inspection facilities.
World class finishing and packagind processes
Well documented and appropriately preserved inventories.
And above all competent and caring human resources.

Metal Seated Valves Manufacturer
Manufacturing Facilities:

State-of-the art production facilities in Kundaim, Goa and in Pune, Maharashtra; spread over a lakh of sq. feet in aggregate
I SO, 9001-2008 certified operations.
Facility accredited under CE marking, ASME, U,PP and R Stamps as well as PED.
Facility and products approved by Global Engineering Consultants and Contracting companies.
Well-equipped testing and inspection facilities.
World class finishing and packagind processes
Well documented and appropriately preserved inventories.
And above all competent and caring human resources.

Gate, Globe and Check Valves
Manufacturing Facilities:

State-of-the art production facilities in Kundaim, Goa and in Pune, Maharashtra; spread over a lakh of sq. feet in aggregate
I SO, 9001-2008 certified operations.
Facility accredited under CE marking, ASME, U,PP and R Stamps as well as PED.
Facility and products approved by Global Engineering Consultants and Contracting companies.
Well-equipped testing and inspection facilities.
World class finishing and packagind processes
Well documented and appropriately preserved inventories.
And above all competent and caring human resources.

Manufacturing Facilities:

State-of-the art production facilities in Kundaim, Goa and in Pune, Maharashtra; spread over a lakh of sq. feet in aggregate
I SO, 9001-2008 certified operations.
Facility accredited under CE marking, ASME, U,PP and R Stamps as well as PED.
Facility and products approved by Global Engineering Consultants and Contracting companies.
Well-equipped testing and inspection facilities.
World class finishing and packagind processes
Well documented and appropriately preserved inventories.
And above all competent and caring human resources.

Description / Specification of Power Grid Network Management

We are involved in offering a wide range of Power Grid Network Management to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Power Grid Network Management. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Power Distribution Network Management

We are involved in offering a wide range of Power Distribution Network Management to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Power Distribution Network Management. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Scada Monitoring And Control

We are involved in offering a wide range of Scada Monitoring And Control to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Scada Monitoring And Control. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Rtus And Frtus For Substations And Rmus

We are involved in offering a wide range of Rtus And Frtus For Substations And Rmus to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Rtus And Frtus For Substations And Rmus. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design