Apex Mineral Water processing Plant Treated any source of Water into Mineral Water Such as Pure Water / Safe Drinking Water with Reverse Osmosis System followed by Pretreatment and also having Sophisticated Post treatment As per standards of Drinking Water indicated in WHO, FDA, ISI. Available in the Capacity range from 250 L.P.H. to 20,000 L.P.H.
For extremely effective solids waste such as sand clay ,star , gras removal at flow rates up to 5 gallons per minute per square foot (GPM/ft2) the Conventional Downflow media filter offers an economical solution. Media beds can be sand, sand/anthracite, garnet/anthracite or anthracite depending on the service application. Typical installations use vertical vessels with header lateral distributors or a strainer plate design. Horizontal units are also offered for larger flow rates for economy in cost and space. Most installations require the use of air scour for cleaning the media when applications have difficult solids to remove. This design is well suited for water treatment applications such as removal of turbidity, softening processes precipitates, oxidized iron and manganese, and following a clarifier. This filter can be constructed of alloy materials for use in mining and corrosive applications such as copper electrolyte in solvent extraction/electrowinning circuits.
Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities such as chlorine ,color, odour ,and oil using chemical absorption. Each particle/granule of carbon provides a large surface area/pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media.
Water Supply from borewells do contain Dissolved iron, which when comes in contact with air, gets oxidized and forms a brownish precipitate.
To remove iron various process such as aeration, chemical dosing followed by filtration is adopted. However the Manganese green sand filtering medium provides an exclusive for removal of excess iron.
Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane to remove larger particles from drinking water In reverse osmosis, an applied pressure is used to overcome osmotic pressure, a colligative property. Reverse osmosis can reduce many types of molecules and ions from solutions, including bacteria, and is used in both industrial processes and the production of potable water
The average size of the openings between pieces of the filter media are represented in microns. For example, a 20-micron filter has larger openings than a 5-micron filter. Consequently, the 20-micron filter element will let larger particles pass through the filter than the 5-micron media would. Bacteria range in size from 0.2 to 2 microns in width or diameter and from 1 to 10 microns in length for the nonspherical specie, so a 1-micron filter will remove most bacteria and cysts. If you are on municipal water, the water has already been treated with chlorine, chloramines and/or fluoride to remove bacteria, so chances are you do not have a bacteria problem, unless there is a problem with the water pipes between the water reclamation plant and your home. Although many customer purchase the 1-micron absolute for the kitchen because it can remove some pharmaceutical drugs, too,
A special lamp generates the radiation that creates UV light by striking an electric arc through low-pressure mercury vapor. This lamp emits a broad spectrum of radiation with intense peaks at UV wavelengths of 253.7 nanometers (nm) which research has shown is the optimum UV wavelength range to destroy bacteria. For more information on how UV works click here. UV disinfection can remove the threat to health from waterborne Pathogens without the creation of disinfection by products that can be generated from drinking water chlorination. From the common bacteria, E-Coli through the Cryptosporidium Oocysts to Adenovirus, UV disinfection is capable of providing effective treatment to ensure inactivation of these pathogens and ensure drinking water is safe.
Ozone is a Triatomoc (Nascent0 Ozygen which is known to be 3000 times more powerful than chorine.Ozone generators Consists ot two electrodes separated by a ceramic dielectric materials. This system is so arranged to form a narrow discharge gap for the electric current being passed. When air is passed through this gap and applied at low current electrical the gas became partially ionized and a diffused bluish glow results. This glow is called corona, when air is passed through this gap, the oxygen is converted into ozone. Corona discharge are more dependable and less cumbersome when compared to the U-V ozone generators. They produce more ozone and can be used for larger applications.
This has two main different methods, namely Single-stage and two-stage process. Single-stage process is again broken down into 3-station and 4-station machines In the two-stage injection stretch blow molding (ISB) process, the plastic is first molded into a "preform" using the injection molding process. These preforms are produced with the necks of the bottles, including threads (the "finish") on one end. These preforms are packaged, and fed later (after cooling) into a reheat stretch blow molding machine. In the ISB process, the preforms are heated (typically using infrared heaters) above their glass transition temperature, then blown using high-pressure air into bottles using metal blow molds. The preform is always stretched with a core rod as part of the process.
Demineralization of water by the ion-exchange process involves ion-exchange treatment in addition to cation-exchange treatment considered above. The anion-exchange process is the exchange of anions between water-dissolved electrolytes and a solid granular material immersed in the water and referred to as anion-exchange material .(anion exchanger).
Description / Specification of Isi Lab
We are involved in offering a wide range of Isi Lab to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Isi Lab. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
