AUTOMATIC ELECTRIC LTD.
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
 Series 35931.jpg){kind=spacer}
 Series 35932.jpg){kind=spacer}
Welcome to AUTOMATIC ELECTRIC LTD.
Synchroscope
| DESCRIPTION | |
|
'AE' SYNCHROSCOPE is categorized into two types A) Electro-mechanical and B) Electronic. |
| ELECTRO-MECHANICAL TYPE |
|
It incorporates a POINTER and LED to indicate synchronising condition. If the generator- (II) frequency is higher or lower than that of mains- (I) the pointer rotates in clockwise or anti-clockwise direction respectively. The speed and direction of rotation depends upon difference in frequencies, which guides the operator to speed-up or slow-down the generator. Synchronising condition is determined by dark lamp method, wherein the pointer coincides with synchronising mark and the LED does not glow. The LED glows in accordance with difference in phase, frequency and amplitude of voltages. When the pointer is towards the bright LED, it indicates the antiphase condition. |
| FEATURES | |
| • | Rugged construction. |
| • | Easy serviceability. |
| • | Wide operating voltage range. |
| ELECTRICAL SPECIFICATIONS | ||
| • | TYPE | Electro-mechanical |
| • | VOLTAGE AT SYNCHRONISM | 110V ± 2% |
| • | OPERATING VOLTAGE | 110V ± 20% (for other voltages use separate PT box.) |
| • | FREQUENCY | 50 / 60Hz ± 5% |
| • | SYNCHRONISING CONDITION | Dark lamp method |
| • | ACCURACY | 2° |
| • | ANGLE OF ROTATION | 360° |
| • | POWER CONSUMPTION | 3 VA for MAINS - (I) & 6VA for GENERATOR - (II) |
| • | INSULATION RESISTANCE | Greater than 20 Mohms at 500V. DC. |
| • | DIELECTRIC TEST | 2kV RMS for One minute |
| • | OPERATING TEMP. | -10°C to 55°C |
| • | STORAGE TEMP. | -20°C to 70°C |
| • | HUMIDITY | Upto 95% RH |
| • | INDICATION | Moving pointer & LED |
| • | CONFORMS TO | I.S. 1248 / I.E.C. 51 (Part-5) |
| MECHANICAL SPECIFICATIONS | |||
| • | MODEL | SYN96M | SYN144M |
| • | SIZE | 96 x 96 x 85mm | 144 x 144 x 60 mm |
| • | PAN EL CUTOUT | 92 x 92+0.8mm | 138 x 138+1.0mm |
| • | WEIGHT (Appro.) | Approx.750gms. | 1 kg. |
| CAUTION : The meter is not to be left in circuit after synchronising. |
| ELETRONIC TYPE |
|
It incorporates circle of LEDs which glows sequentially in either clockwise or anti-clockwise direction at variable speed in accordance with difference in frequencies of mains & generator. Synchronising condition is indicated by the glowing LED of "SYNCHRO ON" position. Antiphase condition is indicated by glowing LED of "SYNCHRO OFF" position at the bottom. This LED glows under following conditions |
| 1) Absence of mains-(l) and presence of generator voltage-(ll) |
| 2) If generator - (Il) voltage crosses ± 20% When frequencies of both supplies are equal, phase angle between two voltages is indicated by glowing of LED at an approximate angle with respect to "SYNCHRO ON" position. |
| FEATURES | |
| • | Continuous operation. |
| • | No moving parts. |
| • | Low power consumption. |
| • | Visible in dark. |
| ELECTRICAL SPECIFICATIONS | ||
| • | TYPE | Electronic |
| • | VOLTAGE AT SYNCHRONISM | 110V ± 2% |
| • | OPERATING VOLTAGE | 110V ± 20% (for other voltages use separate PT box.) |
| • | FREQUENCY | 50/60Hz ± 5% |
| • | SYNCHRONISING CONDITION | Glowing of "SYNCHRO ON" LED |
| • | ACCURACY | 2° |
| • | ANGLE OF ROTATION | 360° |
| • | POWER CONSUMPTION | 2VA for MAINS - (I) & 0.25VA for GENERATOR - (II) |
| • | INSULATION RESISTANCE | Greater than 20 Mohms at 500V. DC. |
| • | DIELECTRIC TEST | 2kV RMS for One minute |
| • | OPERATING TEMP. | -10°C to 55°C |
| • | STORAGE TEMP. | -20°C to 70°C |
| • | HUMIDITY | Upto 95% RH |
| • | INDICATION | Rotating LED |
| • | CONFORMS TO | I.S. 1248 / I.E.C. 51 (Part-5) |
| MECHANICAL SPECIFICATIONS | |||
| • | MODEL | SYN 96 E | SYN 144 E |
| • | SIZE | 96 x 96 x 75mm | 144 x 144 x 60 mm |
| • | PAN EL CUTOUT | 92 x 92+0.8mm | 138 x 138+1.0mm |
| • | WEIGHT(Appro.) | 450gms. | 650 gms. |
| Ordering information 1) Type 2) Model 3) Operating voltage 4) Frequency |
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
