Point Sensor
Features
- Quick response ensure and safe time to reliable indications whenever dew point is out of valid range
- Slight sizes make it ideally for dryers installation
- Measuretest to dew point down to –100 °C
- New sensor technology
- Versions with integrated pressure measurements
- Various outputs version availables: 1 x 4 to 20 mA, 2 x 4 to 20 mA, RS-485 (Modbus), 4 to 20 mA loop power
- IP65 casing provide robust protections in rough industrial environments
- Can be installed direct into dryer through G 1/2” thread
- High accuracy of ±2 °C dew points sensor
- M12 connectors
The measuretest dew point sensor S 220 offers reliable and long lasting constant dew point monitoring for industrial application. Measuretest has used a latest sensors technology and materials, it has higher signals at very low moisture level thus in case reliable measurement down to –100 °C.
With stainless steel wire filters with opening size to below 30 um protected the sensors from particle. It has designed for application to very low moisture level and requirements to be detect. The measured dew points are output through a 4 to 20 mA signals (3-wire or loops power). Dew point sensor to parameter such as analogue outputs scaling, physical unit can be easily changed by using measuretest service kits.
Features
- Quick response ensure and safe time to reliable indications whenever dew point is out of valid range
- Slight sizes make it ideally for dryers installation
- Measuretest to dew point down to –100 °C
- New sensor technology
- Versions with integrated pressure measurements
- Various outputs version availables: 1 x 4 to 20 mA, 2 x 4 to 20 mA, RS-485 (Modbus), 4 to 20 mA loop power
- IP65 casing provide robust protections in rough industrial environments
- Can be installed direct into dryer through G 1/2” thread
- High accuracy of ±2 °C dew points sensor
- M12 connectors
The measuretest dew point sensor S 220 offers reliable and long lasting constant dew point monitoring for industrial application. Measuretest has used a latest sensors technology and materials, it has higher signals at very low moisture level thus in case reliable measurement down to –100 °C.
With stainless steel wire filters with opening size to below 30 um protected the sensors from particle. It has designed for application to very low moisture level and requirements to be detect. The measured dew points are output through a 4 to 20 mA signals (3-wire or loops power). Dew point sensor to parameter such as analogue outputs scaling, physical unit can be easily changed by using measuretest service kits.