• Measure in mm, inches & fractions 
• All metals construction. No plastic parts 
• Least count: 0.01 mm, 0.0005", 1/64" 
• Supplied complete with calibration certificate

• Measures both in mm & inches 
• Hardened stainless steel construction 
• Least Count: 0.02 mm, 0.001”

• Measures in mm 
• Hardened stainless steel construction 
• Least Count: 0.02 mm 
• Supplied complete with calibration certificate

• Premium range of high Precision Squares 
• Internal & External Squareness as per BS 939 Grade B 
• Overall ground with hardened spring steel blades 
• Useful for setting up & checking of jobs

• Used everyday for taking comparative measurements 
• Dividers are used for marking out circles on steel 
• Size represents distance between the fulcrum & the tip 
• Divider points are hardened for increased wear resistance

• All Vees & faces can be energised by turning the knob 
• Holds both itself & work on any ferrous surface 
• Vee’s are hardened 55-60 HRC for increased wear resistance 
• Accuracies controlled to within 8 microns 

• Used for marking on metal, glass, plastics & ceramics 
• For use by machinist’s, engravers, mechanics etc. 
• Double ended - one straight point & other bent at 90° 
• Points are hardened 55 - 60 HRC

• Sturdy cast iron base precisely machined & ground 
• 60mm Square Anvil hardened 55-58 HRC with flatness controlled to within 2 microns 
• Very useful for making fast & accurate comparitive measurements both in laboratories & mass production jobs

• For light to medium duty use 
• Magnetic pull 40 kgs 
• Can be used horizontally, vertically or upside down 
• Can be readily located on any ferrous surface 
• Supplied without dial gauge 

• Made from precision ground tool steel 
• Diameter & cocentricity controlled to within 5 microns 
• Used to locate work edges, shoulders & grooves accurately 
• A time saving tool for use on milling & jig-boring machines 

Description / Specification of Round Die Stock Holders

We are involved in offering a wide range of Round Die Stock Holders to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Round Die Stock Holders. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

• Extra Heavy Duty, Industrial quality 
• Especially useful for working with large diameter taps 
• Nr. 0, 5 & 6 have a forged steel body, Nr. 00 is Zinc Die Cast 
• Nr. 7 & 8 are cast from S.G. iron 

• For hand tapping in confined spaces 
• Ideal for holding taps, reamers, screw extractors etc. 
• Regular T handle type have self centering steel jaws 
• Ratchet type can be set left, right or neutral 

• Ideal where jobs requires machining at an angle 
• Angular slide can be set upto 45° on either sides 
• Fitted with 360° swivel base with 1° increments 
• Allows combined rotation along horizontal & vertical axes

• Provides 3 axial setting of jobs 
• For milling, drilling, jig boring, shaping & grinding applications 
• 2 angular slides -45° either side- and 90° vertical indexing 
• Fitted with 360° swivel base with 1° increments

Description / Specification of Heavy Duty Drill Press Vices

We are involved in offering a wide range of Heavy Duty Drill Press Vices to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Heavy Duty Drill Press Vices. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

• General purpose Drill Press Vice for medium duty applications 
• Cast iron construction with precision ground base & slide 
• Compact, low height vice. Can be easily mounted away from the edge 
• Prismatic jaws with step to hold small jobs

• World’s #1 Toolmakers Vice - a must for every tool & die maker 
• Solid Tool Steel construction- ground & through hardened 
• Accurate to within 8 microns 
• Can be used on the base or sides 
• Ideal for tool making, grinding, jig boring etc

• Solid Tool Steel construction- ground & through hardened 
• Used where highest angular clamping accuracy is needed Sets upto 15° 
• Accuracies controlled to within 8 microns 
• Centre to centre distance controlled to within 5 microns 
• Available as screwless or with screw

• High quality Cast Iron construction, super strong yet light 
• 20,000 PSI casting makes them immensely robust 
• High tolerance machining. Smooth one finger operation 
• Tool Steel jaws hardened to 45 ± 5 HRC. 
• S.G. iron nut

• Tough, severe duty all steel fabricated vices 
• Tool steel jaws hardened to 50 ±5 HRC, 25000 PSI nut 
• Integrated anvil for shaping & beating 
• Good for hammering, chipping & other tough applications

• Best selling clamps made from 60,000 PSI S.G. iron 
• 2 times as strong compared to most other cast clamps 
• High strength spindle with broad steel swivel pad 
• For general purpose clamping in metal & woodworking

• General purpose tubular hacksaw suitable for straight & 90° sawing 
• Strong Aluminium die cast handle - 6,000 PSI 
• Adjustable for 10” & 12” blades. Comes complete with a 12” chrome alloy steel blade 
• Built-in blade storage compartment 
• Lightweight for overhead cutting or use from a ladder

• Heavy Duty industrial quality tubular frame Hacksaw 
• Strong aluminum die cast handle for comfort & control 
• Easy to use blade tensioning device creates 8000 PSI 
• Supplied complete with 12” chrome alloy steel blade

• Manufactured from high grade Chrome alloy steel 
• Useful for light & medium sawing applications 
• Available in 12” length in 18 & 24 TPI 
• Sold as a set of 10 blades or 100 blades

• Indestructible handle made up of 4 spring steel bars 
• Bars locked with hammer head using steel locking plate ensures that the head remains fixed always 
• Forged hammer head is induction hardened 52-56 HRC 
• Ergonomic rubber grip handle absorbs vibration

• Indestructible handle made up of 6 spring steel bars 
• Bars locked with hammer head using steel locking plate ensures that the head remains fixed always 
• Forged hammer head is induction hardened 52-56 HRC 
• Ergonomic rubber grip handle absorbs vibration

• Indestructible handle made up of 2 spring steel bars 
• Bars locked with hammer head using steel locking plate ensures that the head remains fixed always 
• Forged hammer head is induction hardened 52-56 HRC 
• Ergonomic rubber grip handle absorbs vibration 

• Indestructible handle made up of 4 spring steel bars 
• Bars locked with hammer head using steel locking plate ensures that the head remains fixed always 
• Forged hammer head is induction hardened 52-56 HRC 
• Ergonomic rubber grip handle absorbs vibration

• Indestructible handle made up of spring steel bars 
• Bars locked with hammer head using steel locking plate ensures that the head remains fixed always 
• Forged hammer head is forged from 99.9% pure copper for spark free use 
• Ergonomic rubber grip handle reduces vibration

• Indestructible 13” (330 mm) long handle is made with 2 spring steel bars that run all the way through the handle. Bars are locked with the hammer head using steel locking plates ensuring that the head never gets dislodged 
• Hammer Head is forged from special steel & induction case hardened 52-56 HRC for extended life 
• Well shaped, curved claw is tapered for maximum grip & higher leverage when gripping a nail 
• Special bonding process ensures that the head never gets loose from the handle 
• Ergonomic rubber grip handle absorbs shock & viabration reducing fatigue 

• Manufactured from selected carbon steel 
• Used for making indentations before drilling 
• Working tips centered & ground to 90° included angle 
• Overall Length: 4” (100mm) 
• Hardened working points to withstand continuous use

• Forged from octagonal section carbon steel 
• One end has a chisel point & the other has a claw 
• Used for leveraging & pulling out nails from timber 
• Powder coated finish

• Fully automatic single hand operated Automatic Centre Punch 
• Spring loaded design with adjustable depth of punch 
• Tips are made from hardened tool steel 52- 58 HRC and can be conveniently removed for re-sharpening or replacement

• For making gaskets & punching holes in soft materials 
• Cuts leather, rubber, canvas, cardboard, plastic etc. 
• Hardened cutting edge, designed for anti jamming 
• Sizes upto 25mm are in cylindrical style. All larger sizes are Arch type

• Manufactured from select quality carbon steel 
• For hand held, hammer struck applications 
• Induction hardened for durability & extended Life 
• Stamping end is hardened to 58 - 62 HRC 
• Striking end tempered 38-43 HRC - prevents splintering 
• Number Stamp Set- Contains 9 pcs. ‘0-9’. Numbers 6 & 9 are inter changeable 

• Made from heavy gauge pressed steel sheet 
• For punching holes in leather, plastics, cardboard etc. 
• Heat treated punches with brass anvil prevents damage in use 
• Spring loaded head with 6 punches of sizes : 2.0 mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm & 4.5mm