The measurement element of this positive displacement oval gear meters consists of two precision oval gears. The revolution can be sensed by a magnetic-field-controlled pulse generator, resulting in only two moving parts i.e “oval-wheels”. These oval gear meters can be used for application of nearly all operating condition.

• Very high / very low temperatures
• Low and extreme high viscosities
• Nominal Diameter DN 4 to DN 400
• Operation pressures upto 100 bar

Conditionally suitable at low upstream pressures

Turbine meters are indirect volumetric meters. The revolutions of the turbine wheel in these turbine flow meters are proportional to the volume passing through the meter. Turbine flow meters are suitable for measurement of-

• Low viscosity liquids (e.g. L.P.G)
• Mineral oil products
• Crude oil with high viscosity

Nominal diameter: DN 10 to DN 600 
Measuring range : up to 10,000 m³/h
Temperature : 196- 250^o C 
Pressure : up to 100 bar

The fluid to be measured passes through the oscillating element. Excited electro-magnetically, it will oscillate with its natural frequency. The frequency will be picked up by the transmitter and converted into a signal proportional to density or concentration. 


 

Measuring principle is by the rate of flow measurement by the differential pressure method. It is basically calculated by the use of Bernoulli equation. The differential pressure is a measure of flow rate.

Nominal diameter: DN 15 to DN 1400
Pressure : up to 100 bar and above

The transit time flow meter measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid going upstream and downstream of a pipe. For ultrasonic flow meter it is not necessary to stop the flow to install them.

We offer water meters for various application and of various types. From our range of water meters and water flow meters, we have single jet, multijet and woltman type. These positive displacement magnetic drive Sealed Register water flow meters are available in various sizes. High temperature (upto 130^o C) is standard in these water meters.

Universal measuring method without moving parts in electrically conductive measured media of these magnetic meters. 
No moving parts and a free cross section result in zero pressure loss and provide ideal cleaning condition in these magnetic flow meters.

Analysis of inputs of any volume meters, turbine meter, vortex meter, cone meter etc., calculation and logging of flow, volume, nominal volume, mass and energy.

The next generation Flow Computer, only from Dynamic Flow Computers. They are designed to cover today's measurement and control requirements no matter what they may be.

Multi Bi-directional run, DIN Rail mounted or field flow computer can be used for all liquid and gas applications, including custody or non-custody measurement.

Features:

• RS 485 communication
• Solar powered option
• AGA, API approved
• Field mounted instrument

• Digital Rate Indicator/ Totaliser
• Batch Controller
• Large 17 mm display
• Analog 4-20 ma o/p ,pulse o/p available
• RS 485 / RS 232 communication.
• ATEX , CCOE approvals available.

Strainers for Liquids Application: For protection of meter in the pipe system against foreign matters and solids contained in the liquids measured.

Centrifugal gas separator are used to avoid measuring error caused by the air or gas bubbles in the measurement of liquids.

Our Gas Meter Model GS Diaphragm applies to measure the consumption of coal gas, liquefied petrol gas and natural gas.It can also be used to measure the flow rate of air and other gases.

Description / Specification of Rotary Vane Pumps

We are involved in offering a wide range of Rotary Vane Pumps to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Rotary Vane Pumps. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Oil Lubricated Vacuum Pump

We are involved in offering a wide range of Oil Lubricated Vacuum Pump to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Oil Lubricated Vacuum Pump. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Buffer Tank Capacity available from 200 Ltrs to 1000Ltrs. (Larger Buffer tank can be supplied upon request)

Applications : Packaging, Hospitals, General Manufacturing, Laboratories.

Capacity : 250m³/hr to 15685m³/hr.
Ultimate Pressure : 0.01mbar (Using Oil Lubricated vacuum pump as a backing pump)
Applications : Distillation, Food Processing, Drying of Powder & Solids, Transformer Evacuation

Features :

• Built-in water baffle
• Vacuum diffusion pumps are suitable for mineral oils, silicone oils and pentaphenylether (e.g. Santovac)
• High vacuum stability due to integrated booster stage
• Rugged design
• Low ultimate pressure
• Integrated cold cap reduces oil back streaming
• For high pumping speed and gas flow with baffle cap and without baffle mounted above
• Low pump fluid consumption due to built-in fore vacuum baffle
• Pump unit or complete manual/automatic pumping systems on request

Capacities :
Vacuum diffusion pumps with integrated baffle: DN 63 - 250 ISO-K (150 - 1750 l/s) 

Vacuum Diffusion pumps with Cold cap/Baffle cap: DN 320 - 1000 ISO-F (3500 - 40000 l/s)

Features

• Due to new design of these cryo vacuum pumps up to 30% higher pumping speed
• Long up times between regeneration cycles due to big condensation surfaces of the 10K Pascal
• Small total height at mounting in horizontal position of these cryo pumps
• 20K panel with charcoal
• Any mounting position avilable in cryo pumps

Capacities : DN 100 to DN 1000

Features :

• Working range ( 5x10^-5 mbar up to 10^-12 mbar )
• Base pressure in the 10^-12 mbar range
• High pumping speed for chemically active gases

Vacuum connection available DN 40 (CF-F)

Measuring range: 1 x 10⁺³ to 10 ^-11 mbar

Rough & Medium Vacuum Gauges, Passive Vacuum Sensors, Active Vacuum Gauges and Display & Control units.

Control units for High & Ultra High Vacuum.

 

Toshniwal Phlauer Mixer :
The Single Rotor paddle Mixers guarantee the perfect mix, high throughput and economic operations.

The Unique single paddle design divides the housing into zones each served by atleast two paddles. All particles are moving so there is a dynamic interaction between zones. Voids are created mechanically and particles are directed to randomly fill the voids. The speed of mixing is achieved by the high volume of voids created. Accuracy is achieved by limiting the size of the void so particles do not roll apart.

Optional SHEARMAKERS provision with the motors assures for meeting the special process demand such as dispersion / colouring and de-lumping etc.
[Single Shaft Mixer]
[Toshniwal Instruments (Madras) Pvt. Ltd.] Send Enquiry

Applications
Food : Coffee / Tea Premix, Health Drinks, Dried Soups, Snack Foods, Cake Premix, Spices.

Animal Feeds : Feed Mix, Vitamin Trace Mineral Premix, Feed with Molasses, Pellet coated molasses, Milk replaces, Medicinal Feeds.

Chemical : Crop Care/ Nutrition products, Detergents, Water Treatment Chemicals, Foundry Chemicals, Industrial chemicals, Leather/textile chemicals, oil drilling chemicals & Dye Stuffs.

Building Material : Construction Chemicals, Blended Cements, Coloured Masonary Cement, Thermosetting Lining Compound, Wall Plasters & wall Putty. 

Refractory : Dry and wet castables, Refractory Mortar / Putties, Prefabricated Castable & Ramming Mass.

Toshniwal Positive Mixer :
The principle of the contra rotating mixing tools and the specially formed spirals enables homogeneous mixing of liquids and powders, Pastry mass, etc. 

The innovative portable mixer weighing approximately 8 kg is ideally suitable to mix at the sites in small buckets vessels without splattering.

Applications

Lime - bonded, cement-bonded and plastic bonded / plastic reinforced mortar, Cement - bonded and plastic bonded floor finishes.
Paints, varnishes, pastes, adhesives
Sealing, insulating and coating compounds Liquid plastics
Refractory materials, Construction chemicals, floor screeding
All multi - component compounds requiring complete homogenization (e.g) food flavour, pickles, colour mixing, pesticide formulation, liquid detergents etc.

Pneumatic Conveying System: Pneumatic conveying is based on conveying of solid particles mixed with a gas, usually air. 

Vacuum Conveying System : With Vacuum System, material can be sucked from general pick up points and collected at one receiving point. Under this system the powder transfer take place under vacuum.

Toshniwal drying system is continued development of fluidized zone mixing principles, a better utilization of applied heat energy ideally suitable for drying powder, granules and filter cakes etc.,

The drying system will be available in closed loop as well as in open drying system.

The Process Industry needs the most reliable & flexible modules for SIGNAL conditioning. PR Electronics are one of the leading manufacturers of Signal conditioning Module. Totally the PR Electronics module cover more than 1200 applications worldwide.

Technical application

• Water treatment plants
• Paper industry
• Textile industry
• Air supply for burners
• Pneumatic transfer
• Industrial vacuum airing equipment … etc

230 Volt AC or 12 V / 24 VDC : This transfer kit suitable for diesel oil, kerosene and light oil dispensing.

The product group "Flow rate / Totalizers" offers an extensive range of solutions from a basic totalizer up to a powerful flow rate monitor with flow curve linearization, flow rate monitoring, signal transmission, alarm and pulse outputs as well as full Modbus communication. These Products are suitable for use in both hazardous and safe area applications