Filter cartridges is recommended where fine filtration and complete particle retention are essential. Cartridge filter can be surface or depth-type filter: depth-type filters capture particles and contaminant through the total thickness of the medium, while in surface filters (that are usually made of thin materials like papers, woven wire, cloths) particles are blocked on the surface of the filter.

Plate Type Filters Consist Of filter assembly, A Stack of Interlocking PP PLATES WHICH ARE USED WITH PAPERS AND FILTER CLOTHS. CLOTHES are AVAILABLE IN DIFFERENT TYPES OF MATERIAL. The clothes and papers being fitted between the plates. The filter plate assembly can be removed from the filter, the plates dismantled, clean cloths and paper inserted.

These filter bags are in general designed for applications with the desired filtration rate from 1 to 1000 micron and the concentration of liquid is equal or higher than 5 mg/m3. These filter bags are also sediment like cartridge filter, that is to say they reduce the number of sediments transported by the fluid through filtration.

Filter Add-ons are accessory devices designed and provided by us to increase the capability & protection of filter and pump.

The cartridge type single stage filter is simple recirculation filtration unit. This filter is designed for use in solid removal and filtering process solutions. Cartridge filters can be used in wide range of flow capacities & contaminant holding capacities. Cartridge filter housing diameters can accommodate single or multi cartridges. The filter housing is made of pp/gfrpp/acryli/polycarbonate and contains filter cartridges, sealing arrangement to ensure zero bypasses, even after high-pressure.

These Plate type single stage filter are simple recirculation filtration unit. This filter is designed for use in solid removal and filtering process solutions. Plate type filters can be used in a wide range of flow capacities & contaminant holding capacities.The plate type filter can accommodate the different available diameter of plates. The filter is made of pp/gfrpp/acrylic/polycarbonate and contains Filter plates, cloth, shower and, sealing arrangement to ensure zero bypasses, even after high pressure.

The bag type single stage filter system is designed for optimum filtration performance. They are particularly useful for filtering large volumes of high viscosity liquids. Bag filter housing diameters can accommodate single or multi cartridges. Bag filter chamber is made of pp/grip/acrylic, filter bags, internal cage to support bags, sealing arrangement to ensure zero bypass filtration, The internal support ensures bags will not burst as high differential pressures build up during operation. Bag type filters can be used in wide range of flow capacities & contaminant holding capacities. Cartridge filter housing diameters can accommodate single or multi bags.

These are Duplex System with Serial Type Two Stage Filtration unit and are suitable for those applications where Fine filtration of a solution is required. A very fine filtration can be achieved by using a suitable two stage combination of filter plates and cartridges i.e. plates+cartridge, plates + bag and cartridges + bag. Hence these filters can be used in wide range of flow capacities & contaminant holding capacities

These filters are suitable for those application where high flow of solution is required. By parallel filtration, the effective surface area of filtration can be increased to permit the use of high capacity pump or can achieve fine filtration.

Nowadays, metal finishing industry favors a more precise approach to controlling organic contaminants. Filtration systems are designed with both a filtration chamber and a carbon “polish” chamber For solid removal, carbon absorption and trap filtration. Add only one carbon chamber for organic impurity removal. carbon chamber and the slurry tank can be provided in various sizes and capacities to suit the selected filter.
A slurry tank can also be added for pump priming, pre-coating, and chemical additions. This system allows you to use any below-selected filter unit with the required pump:

• Plate Type Single Stage Filter Unit
• Duplex Systems with Parallel Flow Filtration Unit:
• Duplex System With Series Flow Filtration Unit:

KEMS Magnetic drive chemical process pumps are seal-less, providing for maintenance free and leak proof operation. These pumps are available in the defferent material of construction for a wide range of chemical and temperature compatibility.

KEMS MB series Pumps are widely used in Electroplating, Effluent treatment plant, and other fluid handling processes. These pumps are close-coupled to minimize size and also available in long-coupled design with bearing pedestal to accommodate customer’s motor. Pumps are Available in molded grip or stainless steel 304/316 solution contact. Internal or external mechanical seals are available with (carbon-ceramic or sic) seal faces. The 316 stainless steel shaft adapter is utilized to protect the motor shaft and allows the use of standard flange type motor.

With the help of our experienced engineers, we have been able to manufacture and supply a wide range of vertical chemical pumps. These pumps are acclaimed for their high functional efficiency and consistent performance. Vertical run completely dry without ill effect are used in applications requiring the continuous transfer of liquids, with a high degree of reliability, hence remove one cause of breakdown which is often attributable to the human element. The most important gains to be derived from the use of Vertical Sealless Glandless Pump are in the sphere of maintenance and the consequent reduction in downtime production losses. Normal maintenance on the Vertical Glandless Pumps is confined to lubrication of the driving motor bearings.

We are manufacturing two types of vertical pumps i.e. 

• Immersable vertical pump and
• external type seal/gland less vertical pump.

Electroplating Tanks

For Electroplating tanks chemical storage and many electro-processes, it is necessary for such tanks/container which is suitable for use in the chemical solution. The following type of tanks is available to be employed according to suitability and operating conditions.

Welded steel tanks: These tanks are made of mild steel sheet, duly lined with PVC, rubber, glass fiber, and lead-lined from inside or both side.

Plastic tanks: Plastic tanks are widely used in electroplating industry because these are lightweight, chemical corrosion resistant and good electrical insulator. The following types of tanks are available

Polypropylene tanks: HDPE tank, PVC tanks, suitably reinforced with ms frame and lined with fiberglass. Especially pp and rigid PVC tanks are made of high-quality sheets using the latest extrusion welding technology form leisure(swiss)

Stainless steel: These tanks are made of stainless steel sheet. Many compositions of ss are available. It is necessary to use proper grade of material according to the employed solution and operating conditions.

Turbine blowers are designed to meet the requirement of most critical applications. it is widely demanded in electroplating, metal finishing plant, effluent treatment plant, vacuum lifting, wastewater treatment plant and other related areas. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blowers’ impellers are dynamically balanced to virtually eliminate vibration while increasing overall long-term reliability.

The Hull Cell Apparatus is a miniature plating unit designed to produce cathode deposits on a panel that correlates the characteristics of the plating unit being evaluated. Interpretation of the ‘‘as plated’’ cathode panel give rapid information about brightness levels, irregular plate deposits, uniformity of deposits,coverage, throwing power, impurities, and plating bath chemistry.

To speed up production in plating works, the need to dry arises, particularly small articles, after dipping or other wet operation. The Shell of the dryer is made of mild steel sheet and is cylindrical in shape. This is mounted on the heavy iron base to provide stability when the workload is out of balance.
The centrifugal dryer contains a perforated Stainless Steel basket which snuggly fits over an underlying rotating disc. The inner perforated Stainless Steel basket can be manually lifted out from the cylinder. The rotation disc gets the drive from an Electric motor and rotates when the power is switched ON; the perforated Stainless steel Basket placed on the disc also rotates with the disc and generate a centrifugal force which A coil-type heater is also fitted on the Lid of the dryer to keep the inside temperature to the desired level to dry the material .

 This dryer can be equipped with Mechanical Lid- Lock and brake system with starter and a separate switch for the Automatic on-off function of the dryer.

We offer Ampere minute | hour meter, a precision Electronic instrument with latest ic technology. This meter is used for electroplating thickness control and testing battery Amp-Hr. These meters are available with 6 RED 7 Segment LEDs of 0.56” character height. However, the current display is fixed at Max 9999 Amps using a shunt of current & 75mV for user programmed. Following are some of the features of our model 800AH programmable amp-hour meter:

Electroplating: Plating thickness is directly proportional to the integration of current over a period of time. The preset Amp-Hr or Amp-Min limit ensures precision repeatability and uniformity of the plating thickness guaranteeing quality and avoiding wastage of material. Time controlled dosing pumps allow automation. Hence where there is a criticality of the thickness of plating and uniformity is required, Ampere-Hour | Minute Meter is the solution. For example, gold plating, rhodium plating, platinum plating etc.

Battery Testing: The instrument integrates the current while allowing the charged battery to discharge through a load until the battery voltage falls below the specified limit (10.5V for a 12V battery), to give a measure of the AH rating of the battery.

Rectifiers are widely used in Electroplating, Anodizing, Etching, some cleaning process and other Electrochemical processes. Techno rectifiers are custom built as per requirement of different voltage(DC) ie. 8-12 volt for most of the electroplating, some cleaning processes, 16 volts for Sulfuric and Chromic Anodizing and some Electrochemical processes. These rectifiers are made in air-cooled and oil cooled. Generally, oil cooled type rectifier is recommended. However, if proper care is taken from the plating bath and its fumes,

A belt oil skimmer is a very simple product to remove the floating oil. We manufacture oil skimmer as per customer requirement. As this application depends upon the area, location and requirements given below, the oil skimmers are distributed in three types:

single belt type skimmer:- Uses endless polyurethane coated endless belt. This skimmer uses a single belt to collect the oil.
double belt skimmer:- This type of skimmer uses a double belt to collect the oil.
disk type skimmer:- This type of skimmer uses disk instead of the belt.

Description / Specification of Dosing Pump

We are involved in offering a wide range of Dosing Pump to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Dosing Pump. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design