SUGUNA PUMPS AND MOTORS
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
 53769.jpg)
Welcome to SUGUNA PUMPS AND MOTORS
Reciprocating Piston Pump
FEATURES
Plunger : The easy movement of plunger inside the brass sleeves, ensures positive suction and delivery.
Valves : The brass valves provide smooth and direct passage for water from suction to discharge points. The spring fitted rubber valves help to reduce slippage and also ensures noiseless and smooth operation.
Piston shaft : The stainless steel shaft connects the plunger assembly with the crank shaft of the pump and provides smooth running with minimum noise.
Jet Pumps (Single And Multi Stage)
 53769.jpg)
DESCRIPTION
Suguna Jet Centrifugal pump combination are designed for high efficiency, operate on optimum total head with good discharge characteristics and low power consumption.The components are made of selective materials under strict quality control. Tolerance are of high standard ensuring reliability and durability.
Pressure Booster System
SALIENT FEATURES
Suitable for continuous and heavy duty applications
Dynamically balanced rotor for silent and smooth running
ADVANTAGES
INDIVIDUAL ADJUSTMENT – The minimum and maximum pressure can be adjusted as per your requirement to ensure optimum operation in all installations.
GREATER RELIABILITY – The use of quality material and latest technology makes the system reliable.
WIDE RANGE – A wide range of tank capacities are available to meet varied requirements.
High Head Pumps
FEATURES
Multi stage pumps with single stainless steel shaft
High grade cast iron / gun metal casing
Brass impeller for durability
Self priming pumps
Available in gun metal / brass for special applications
APPLICATIONS
Domestic & agricultural use
Water circulation & boiler feed
Chemical pumping & circulation for industrial coolers
Plantations
Electric Motor
DESCRIPTION
Single phase, three phase electric motor of robust, heavy construction that are durable and working at various voltage conditions. Special motor for industrial applications and as prime mover for pumps, compressor and wet grinders etc.
BASIC DESIGN FEATURES
Synochronous A.C. Voltage 240 & 415
Frequency 50 Hz (non standard voltage and frequency on request)
Three phase and single phase winding
Squirrel cage rotor
Insulation class ‘B’ / class ‘F’
Performance as per IS 325, IS 2165 for 3 phase and IS 996 for single phase motors
Buffer Motor
DESCRIPTION
High quality,reliable and heavy type buffering motors for use in industries. Heavy loads can be applied which increases the productivity of the components buffer.
FEATURES
Quality bearing in rear and front side of rotor
Dynamically balanced rotor
Graded winding with copper wires tested with Surge and high voltage testing
Energy efficient motors
Open Type Motor
DESCRIPTION
Special heavy duty open type screen protected motors for use in industries and as prime movers in agriculture. Extension shaft motors can be supplied for driving more than one equipment.
BASIC DESIGN FEATURES
Synochronous A.C. Voltage 240
Frequency 50 Hz
Single phase winding
Squirrel cage rotor
Insulation class ‘B’
Performance as per IS 996
Gear Pump
BASIC DESIGN FEATURES
Max. pressure: 125 psi
Lip or packing seals
Shaft bushings
Max. viscosity: 500 SSU
Self-priming
Bidirectional rotation
SALIENT FEATURES
Intermittently transfer a wide range of nonabrasive or non particulate viscous liquids with a near-pulseless flow in many industrial, commercial, marine, or agricultural applications.
Borewell Compressor Pumps
DESCRIPTION
The borewell compressor pump works on the principle of difference in density of two-inter-connected water columns and the heavier one over balancing the lighter one. Water outflow through delivery pipe will be pulsated. the discharge of water will greatly depend on the yield of the bore. Air distributor fitted at the end makes this operation possible.
FEATURES
Shell moulded casting
Interchangeable Standardized Parts
Honed Cylinders to give Extra Long Life
Crank and connecting Rod are made of special Alloy Steel Forgings.
Needs no footvalve / Jet, hence easy to install and maintain.
Water outflow through delivery pipe will be pulsated and not continuous.
Car Washer
DESCRIPTION
Suguna Car Washer is a single plunger,oil splash lubricated reciprocating plunger type water pump.It consists of a plunger and plunger housing fitted to the crank case. The suction pipe with filter, balancing drum, safety valve, and the delivery hose are fitted to the plunger housing. the delivery hose is fitted to the plunger housing through a connector which also accommodates a pressure gauge and a manometer safety device.At one end of the crank shaft is fitted dynamically balanced fly wheel cum pulley.’V’ The motion fitted on a base/tank with provisions for belt tension adjustments.
FEATURES
Single plunger
High pressure piston pump
are of heavy duty pumps
Durable material
Stringent manufacturing
process
Reciprocating Air Compressor
FEATURES
Longer life
Low noise level/vibration
Easy to operate
Low oil consumption
Minimum maintenance
Low operating costs
SPECIAL FEATURES
Piston : Automotive type low expansion aluminium alloy .
Cylinder : Special cost iron, deep ” finned for quick heat dissipation .
Valve Plates : Special Stainless steel material for high resistance and efficiency and for self floating .
Inter / After – Cooler : Deep finned aluminium alloy specially designed to keep temperatures low and minimize formation of carbon .
Crank Shaft : Made of Carbon steel dynamically balanced with roller bearings .
Diaphragm Pressure Switch : For efficient automatic On and Off automatic venting and no’load restarting of compressor units, pressure switch / pressure switch with electromagnetic unloader is provided.
Pressure Tank
DESCRIPTION
Suguna pressure tanks are designed with perfection for delivering optimal performance.
Smaller tanks are vertical whereas larger capacity tanks are horizontal with legs. Incase of larger tanks, pumps can be fitted on the tank platform.They are available from 8 ltrs to 1000 ltrs capacity.
SPECIFICATIONS
Input Power Range : 0.5 HP and 2 HP
Speed : 2880 rpm
Electrical power supply : 180-240 volts AC supply.
Duty : Continuous
Degree of protection : IP 55
Class of insulation : ‘F’
Provided with built – in thermal protector
Solar Pump
Main Function
Brushless, permanent magnet double shielded motor, frequency converter and motor controller inside.
Soft start running make system life longer
Powered by AC/DC
Supply Voltage range : 90-360 VDC or 90-240 VAC at 50/60 Hz, 90-440 VOC
50 Hz and 60 Hz both working
Very easy installation
MPPT Efficiency more than 95%
Motor efficiency more than 84%
Dry protection
Reverse protection
Over head protection
Over-current protection
Over-voltage protection
Losting-Phase protection
Missing-voltage protection
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
