Zinc Chloride Solution Battery Grade is used as an electrolyte in dry cell batteries, it also acts as a corrosion inhibitor. It is also used by Adhesive manufacturers. 

At sigma Chemical Industries special care is take to maintain Heavy metal impurities as low as possible and Iron Impurities below 5 PPM (Parts Per Million) i.e. 0.0005% on 100 % basis in battery Grade.

Some of the Special Features

Unadulterated
Good pH value
Excellent conductivity and Eco – Friendly

Zinc Chloride Solution Pharmaceutical and food grade is mainly used by Food Processors, pharmaceutical and fine Chemical manufacturer as Zinc serves as a cofactor for more than 70 different enzymes including both RNA and DNA polymerase and also useful for many complex organic reactions. Zinc also serves as an essential nutritional requirement. 

At Sigma Chemical Industries special care is taken to maintain Lead (as Pb) impurity below 3 PPM i.e. 0.0003 % on 100 % basis in Zinc Chloride Solution Pharmaceutical and Food Grade Manufactured. 

Some of the Special Features

Unadulterated
Good pH value
Excellent conductivity and Eco – Friendly

Zinc Chloride Solution Technical Grade is mainly used to accelerate the polymerization reactions, Accelerate Rubber and Fibers vulcanization, Fertilizer industries, Stearate Manufacturers and others. 

At Sigma Chemical Industries special care is taken to maintain all metallic impurities below 5 PPM i.e. 0.0005% on 100 % basis in Zinc Chloride Solution Technical Grade.

Some of the Special Features

Excellent Strength of solution
Non–Toxic
Unadulterated
Safe to use and Eco–Friendly

Galvanizing Pre Flux is a flux which saves your valuable Time, Zinc and reduces human errors. Hence it can also be called as Zinc Saving Flux. It’s a mixture of Zinc Chloride, Ammonium Chloride with some special additives in an ideal ratio which gives best fluxing action. 

Galvanizing Pre Flux is in liquid form with chemicals mixed in ideal ratio, so it can be directly added in the flux bath without any prior mixing of water which reduces human error. It can also be used to top up the flux bath when your job is in process and it can also be added in the flux bath before or after or at the time of filtration of flux, which saves time and labour. It saves zinc by reducing ash and dross formation and also eliminates rejection due to black spot. 

Galvanizing Pre Flux is in liquid form with chemicals mixed in ideal ratio, so it can be directly added in the flux bath without any prior mixing of water which reduces human error. 
It can also be used to top up the flux bath when your job is in process and it can also be added in the flux bath before or after or at the time of filtration of flux, which saves time and labour.
It saves zinc by reducing ash and dross formation and also eliminates rejection due to black spot. 

Some of Special Features 

Manufactured from finest quality chemicals with ideal mixing ratio, gives best fluxing properties and free from iron impurities.
Can be directly added in Flux Bath without prior mixing, it can also be used to top up the flux bath when your job is in process, which Saves time and labour and reduces human error considerably.
Can also be added in the flux bath before or after or at the time of filtration of flux.
Reduces formation of Ash and Dross which saves Zinc.

Leveling flux is a mixture of more pure quality zinc chloride solution and ammonium Chloride with some special additives which make this flux more expensive than others.
It is in liquid form with ideal mixing ratio. 
This can be used to increase the Baume (Be) or Specific Gravity of the Flux Bath in between the Galvanizing process which increases the life of Galvanizing Pre Flux. 

Some special Features 

It is in liquid form so can be directly used to top up the Flux Bath in between the galvanizing process.
Increases the life of flux in flux bath.
Easy and safe to use as no prior mixing is required and can be directly poured in the flux bath which saves time and labour

Radiator flux is a mixture of zinc chloride solution, Hydrochloric acid and ammonium chloride with some special additives in an ideal ration which gives best cleansing action on metal surfaces. 

Radiator flux is a acidic solution. Due to the oxides dissolving ability of the zinc chloride, Radiator flux is primarily used to clean the brass and cropper surfaces from organic contaminants and oxides. It is also used in other assembling operations like Tube –milling, Tube end dipping, core –baking and other processes for automotive radiators and heater cores.

Some of the Special Features 

Made from finest quality chemicals with ideal mixing ratios gives best cleansing action and fluxing properties.
Excellent Strength of solution.