LST 50 is a compact, versatile and rugged Semi-Automatic Shrink Wrapping System consisting of L sealer and Shrink Tunnel
With a 50 cm long x 38 cm wide sealing area, it is suitable for most products that need to be shrink-wrapped
The bottom-heated belt in the tunnel gives a mirror-finish to the bottom of the pack
Six parameters are available for optimum sealing and shrinking result and speed of operation. They can be stored by product type in one of 16 memories of the machine, and are easily recalled

LST 50 Super is a compact, versatile and rugged Semi-Automatic Shrink Wrapping System consisting of L sealer and Shrink Tunnel
With a 50 cm long x 38 cm wide sealing area, it is suitable for most products that need to be shrink-wrapped
The bottom-heated belt in the tunnel gives a mirror-finish to the bottom of the pack
Six parameters are available for optimum sealing and shrinking result and speed of operation

The EFK 250 Automatic L Sealer is used to automatically wrap products in centre-folded film
The centre-folded film is inverted and opened by inverting triangles at the top and bottom of the in-feed conveyor that allows the product traveling on the conveyor to move inside the film
The product is detected by electronic eyes and advances into the sealing area with the film where it is automatically sealed inside the film by a hot-knife sealing system 
The machine is easily adjusted for width and height to suit the product
Machine operation is controlled by PLC
The EFK 250 Automatic L Sealer can be used with a variety of 

Flexo

Flexo is a high speed side sealing shrink wrapper which offers high flexibility
It can handle a wide range of films & can pack single or stacked products
The changeover is tool less & extremely fast
Stainless steel model is available for food packaging

Fully automatic Shanklin® FloWrap machines are continuous motion horizontal form-fill-sealers designed to wrap packages effortlessly and efficiently 
Models F-1, F-5 and F-7 wrap product with neat trim seals on three sides of the package
Models F-3 and F-4 produce packages with trim seals on the ends of the package and a neat overlap seam on the bottom
Models F-1, F-3, F-4 and F-5 are available in USDA-approved models

A patented tight packaging saves up to 10% film in length and width, shrinking is thus not necessary anymore
Different packaging styles possible: side sealing, overlap sealing or both
Automatic adjustment of all essential machine functions according to product dimensions
Touch screen with easy operator guidance and product data memory
Fine adjustment possible during machine operation
Servo controlled with safety PLC

The Omni form-fill-seal wrappers redefine traditional shrink packaging equipment with innovative new features like modular plug and play infeeds, advanced control network, and dual product flow configurations
Designed for maximum packaging flexibility and ease of operation, the Omni begins the next generation of shrink packaging equipment

Product in feeding with unequal gaps or various product lengths
Packaging of single or stacked products
Copilot function for easy set-up of the complete machine with product data memory
Automatic height and length adjustment of the transverse sealing unit
Servo drives for continuous and safe operation as well as safety PLC

The Shanklin Triumph® automatic form-fill-seal wrapper is a perfect midrange solution for all those applications that require more advanced features than an L-Sealer, but not quite as complex as those on a High-Speed Automatic Wrapper
The Shanklin Triumph® is easily one of the best shrink packaging values available on the market today

The SLB 5012/25 Shrink Tunnel is a highly cost-effective tunnel
A special air-circulation system saves energy by recovering residual heat, then re-using it for heating up
Electronic temperature control and a variable air supply on all sides, plus high insulation, guarantee reduced energy consumption with optimum adaptation to the product

The T-85 Shrink Tunnel is used to shrink-wrap products wrapped in film
The tunnel comes with 2 heating zones and 2 blower motors to achieve optimum shrink result within an 85 cm long shrink chamber
Two open-coil heaters on each side of the blowers help to maintain constant air temperature
A variable-speed roller conveyor with rotating or stationary rollers carries the product through the tunnel
The tunnel is available as painted or stainless steel
The T-85 is also available as T-85X for an extra-wide and extra-high shrink chamber

The 65 ST Series Shrink Tunnel comes with a 65 cm x 1 m shrink chamber that is suitable for shrink bundling of collated / stacked products in LDPE shrink film 
The tunnel can also be used with Tandem Wrappers that bundle products in two lanes and with In-Line Tray Wrappers
The chamber length can be extended for higher speeds
The shrink chamber can be 25 cm, 30 cm, 35 cm, 40 cm or 45 cm high
A heavy-duty conveyor is available for heavier products. The cooling fan at exit is standard
The tunnels are available in painted or stainless steel material

Automatic sleeve Wrapper makes distribution packs in LDPE / PVC shrink films that will help you to lower your packaging costs and increase sales
The wrapper automatically collates products in the desired matrix and wraps them in film (usually LDPE film)
It uses two rolls of single-wound film rolls that are sealed together by the previous sealing cycle and that form a single film curtain
The collated products are pushed through the film curtain and clamped at the other end of the sealing bar before making one more seal around the bundled products with a constantly-heated sealing bar that is 65 cm wide

Cryovac CT-301 is a high performance shrink film based on the patent-pending Sealed Air micro-layering technology platform. This shrink film has no trouble “standing up to” the performance of other films with twice the thickness. With proven versatility across a broad range of shrink equipment, this powerful shrink film provides enhanced seal strength, increased durability and retail-ready optics and clarity.