POWER ENGINEERS AND SERVICES
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to POWER ENGINEERS AND SERVICES
Servo Controlled Voltage Stabilizer Single Phase
| Description | Single Phase |
| 1.Capacity | 1 KVA to 50 KVA |
| 2.Input Voltage | 190-270V / 170-270V |
| 3.Output Voltage | 220/230/240V(Settable) |
| 4.Nature Of Cooliing | Aircooled/Oilcooled |
| 5.Output Voltage Regulation | +1% |
| 6.Efficeincy | >98% |
| 7.Input Frequency | 50Hz,+3Hz |
| 8.Effect of Load Power Factor | Nill on output voltage |
| 9.Speed Of Correction | 30v/Sec |
| 10.Servo Motor Drive/Type | Ac Synchronus stepper motor & opto coupler based traic drive |
| 11.Display Type | LCD |
| 12.Displayed Parameter | Input/Output Voltages,Hz,amps |
| 13.Protections | Under Voltage/Over Voltage cutoff,Overload and short circuit protection |
| 14.Type & Control Design | Micro Controlled (DSP) based with O/P Sensing feedback system |
| 15.Operating Temperature | 0-50 degree celsius |
| 16.Manual By Pass Facility | Through change over switch above 5kva |
| 17.Front Panel | Enter,Up/Down key |
| 18.Distoration of waveform | Nil(Same as Input) |
| 19.Effect of Load PF | Nil(on output voltage) |
| 20.Nature of winding | Copper Variacs |
| 21.Enclosure | CRCA mild steel |
| 22.Standard of Stabilizer | As per I.S. 9815 |
| 23.Oil standard | As per I.S 335 |
Three Phase Servo Controlled Voltage Stabilizer
| Description | Three Phase |
| 1.Capacity | 3 KVA to 2000 KVA |
| 2.Input Voltage | 295-465V / 330-480V |
| 3.Output Voltage | 380/400v/415V(Settable) |
| 4.Nature Of Cooliing | Aircooled/Oilcooled |
| 5.Output Voltage Regulation | +1% |
| 6.Efficeincy | >98% |
| 7.Input Frequency | 50Hz,+3Hz |
| 8.Effect of Load Power Factor | Nill on output voltage |
| 9.Speed Of Correction | 60V/Sec |
| 10.Servo Motor Drive/Type | Ac Synchronus stepper motor & opto coupler based traic drive |
| 11.Display Type | LCD/LED |
| 12.Displayed Parameter | Input/Output Voltages,Hz,amps |
| 13.Protections | Under Voltage/Over Voltage cutoff,Overload and short circuit protection SPP,PRP |
| 14.Type & Control Design | Micro Controlled (DSP) based with O/P Sensing feedback system |
| 15.Operating Temperature | 0-50 degree celsius |
| 16.Manual By Pass Facility | Through change over switch above 100KVA optional |
| 17.Front Panel | Enter,Up/Down key |
| 18.Distoration of waveform | Nil(Same as Input) |
| 19.Effect of Load PF | Nil(on output voltage) |
| 20.Nature of winding | Copper Variacs |
| 21.Enclosure | CRCA mild steel |
| 22.Standard of Stabilizer | As per I.S. 9815 |
| 24.Reset | Auto/Manual |
| 25.Event Recorder | Fault Detections Optional |
| 26.Conections | Input/Output 7way terminal connector. |
| 23.Oil standard | As per I.S 335 |
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
