Manually operated capsule filling machine is designed to serve the need of regular production in small scale pharmaceutical companies. The machine is easy to operate, gives production with minimum rejection and no weight variation. It is capable to fill powders, pellets in all sizes of capsules.

The semi automatic aluminium tube filling and crimping machine is sturdy compact in design and simple in operation. It consists of an aluminium-rotating disc with interchangeable tube holding sockets for different tube sizes.

We offer to our esteemed clients carton tapping machines with the following features:-

1. Reliability
2. Efficiency
3. High-precision
4. Durability
5. Easy maintenance

We manufacture cutting edge carton strapping machines that come in useful and productive designs. Our carton strapping machines are compact and designed in a way that enhances productivity and efficiency. This machine is used for packaging in the pharmaceutical industry.
 

We specialize in manufacturing of ointment filling and crimping machines which are suitable to fill ointment in tubes, available in various dimensional specifications and at industry leading prices.

We offer inkjet coding machine, for all coding and marking applications available in in several specification including standard, modified and customized.

We are engaged in offering transfer pump with level sensing unit for liquid. These transfer pumps are portable and are particularly suitable for the transfer of fluid. Our range of pumps has a flow control facility. It has a higher precision engineering and no spillage.

Feature:

Low initial investment & low running cost
Cost effective & efficient.
Compact construction & occpies less floor space
Simple design & easy accessibility of all machine components for servicing and maintenance.

Edge-To-Edge Cutting -

To eliminate trim waste between packs.
All change over parts and adjustments acessible frrom front side.

Vibro separators are circular gyratory screens used to separate solids from solids and liquid from solid. Vibro sifter consists of specially designed motor mounted vertically at the center of the base plate of the screen. The screen is in between feeding hopper and bowl. The material is fed on to the centre of top screen. Working principle the top weight on the motor shaft rotates in a plane close to the centre of the mass of assembly. Rotation of the top eccentric weights creates vibration in the horizontal plane which causes material to move across the screen cloth to periphery increasing the horizontal throw, causing oversize material to discharge at a faster rate. The bottom eccentric weight rotates below the centre of mass creating tilt on the screen giving vibration in vertical and tangential plane. 

Ribbon blender is used for uniform and homogeneous mixing of powder, granules. The complete assembly is mounted on a MS/SS structure. The inner and outer ribbons are so arranged that during rotation, the materif reaches each and every corner of the trough and imparts radial and linear motion to the whole of the material to be mixed. 

Application: 
Multi mill is widely used for wet & dry granulation, pulverisation in pharmaceuticals, chemicals, cosmetics, ceramics, colours, etc. It also finds application in pesticides, fertilizers, spices, detergents, insecticides, plasitcs & resins industries. 

Description : 
The unit consists of stainless steel hopper, processing chamber with beater assembly, motor, dol starter, three speed pulley, screen and sturdy body. Ss beaters having knife and impact edges rotate within a selected screen. The material fed in the hopper enters into the processing chamber where it moves to the pentery and passes through screen. Output & quality of final products depends on shapes of beaters (knife/impact edge) speed  size of screen. Stainless steel 304/316 quality hopper and processing chamber beaters and scrapper blades made in stainless steel. Can be easily dismantled and cleaned cylindrical screen for continuous output mill with motor, electrical switchgear along with pillar are mounted on a painted base plate with castors for mobility flame proof electrical motor can be incorporated designed for continuous operation widely used for wet and dry granulation, pulverization, etc. 
 

Specially designed for wet and dry granulation, pulverization and dispersion of the material. Available in standard and GMP models with plain and water jacketted and S. S. 316 contact parts. Beater assembly fitted on separate pillow blocks for easy to convert knife edge to impact edge and easy to maintenance. Optional AC frequency drive and available in beltless drive model. Also available fitted with 32 beaters and auto feeding system 

1. 12, 24, 36, 42, 48, 60, 72 inches diameter stainless steel pans
2. Product contact parts are in stainless steel 304/316
3. The gear box, motor, and hot air blower are enclosed in a mild steel enclosure or stainless steel in case of GMP models
4. Mounted on dynamounts to avoid foundations
5. Heaters interlocked with the blower fan
6. Spray system with pressure tank and spray gun
7. Peristaltic pump for metered dozing
8. Exhaust blower as optional

SPRAY Coater is an attachment to the existing coating pan and most suitable for the rapid and uniform coating of Tablets, Granules & Pallets. Two nos. spray guns are mounted on a portable SS stand. The spray nozzles are operated with the help of a pneumatic cylinder connected with digital timer and solencid valves programmed for a sequential spray. The guns can be tilted at any desired angle. The system consists of a stainless steel 316 quality pressure vessel provided with SS jacket with electric heaters and thermostat control & provided with safety valve, pneumatic oscillating type stirrer fitted on the top of the vessel. The vessel is filled with the coating solution and pressurized with oil moisture free compressed air to get uniform atomized conical spray over the tablet bed inside the coating pan.

"V" Blenders are used for mixing of solid-solid or solid with liquid (Maximum 10%) in powder or granulated form. The mixer has a "V" shaped body held by two horizontal half shafts hold in bearing blocks & mounted on a sturdy structure. The vessel has opening at two ends with covers and outlet butterfly valve for discharge. The vessel is driven with the help of a worm reduction gear box coupled to an electric motor. All contact parts are made of stainless steel 304/316 quality. Stand can be of MS or SS claded for GMP Model. All SS parts are mirror polished to mirror finish from inside and matt finish from outside. The unit is provided with a control panel board with safety railing. It allows smooth mixing without deforming the particles or a strong mixing by breaking the lumps. Discharge by gravity.

Tray dryer is used for the best drying results in conventional process. It is a double walled cabinet with one or two doors. The gap between two walls is filled with high density fibre glass wool insulation material to avoid heat transfer. Doors are provided with gaskets. Stainless steel trays are placed on the movable trolleys. Dynamically balanced axial flow type blower fans are provided for uniform air circulation in the drying chamber during process. Machine is provided with control panel board with process timer. Digital temperature controller cum indicator etc. 

The double cone blender is an efficient and versatile machine to mixing dry powder and granules homogeneously & widely used for pharmaceutical, food, chemical and cosmetic products etc. It consists of a cylindrical shell with two conical frustums provided with opening for charging and discharging. Butterfly valve is provided for discharge. The vessel is mounted on a sturdy stand with bearing blocks & driven through a gear box coupled with motor. The machine is provided with control panel board and safety railing. All jointa argon are welded, ground and polished to mirror finish from inside and malt finish from outside.

Mass mixer is used for mixing dry or dump materials and used for tablet granulation. It consists of a 'U' shaped trough, discharge valve, solid SS end plates, SS shaft with specially designed paddles. The shaft is coupled with heavy duty gear box & motor. The shaft is supported on heavy duty bearing blocks at both the ends and provided with teflon seals & stuffing box. Top cover is provided with acrylic sheet for easy visibility during mixing operation. The motor-gear box assembly is completely covered in enclosure control panel box is provided with the machine with reverse and forward switch for the shaft. MS parts are epoxy painted or cladded with SS sheet for GMP model. All SS parts are polished to mirror finish from inside and outside parts are malt finished. 

We offer drum mixers, which is east-to-use and maintain. Effective for longer hour work, these drum mixers are used in industries like pharmaceutical, chemicals, distilleries, etc. We offer the range of drum mixer in customized specifications along with standard range.

We introduce ourselves as a customer driven and quality focussed manufacturers and exporters of single punch tablet punching machine that is uniquely designed for easy maintenance and offered at industry leading prices.

We offer 10 STN rotary tablet punching machine. Our high quality tablet punching machines support tablet manufacturing on a daily basis. We manufacture rotary tablet punching machine with quality and cost in mind.

Our high quality of tablet dedusting machine is used for removing excess powder and burs from the compressed tablets. We offer these machines in several specification including standard, modified and customized.

Our concern is engaged in producing excellent tablet inspection machines. 

Features:-

Very easy in operating, can be efficiently handled.
Highly cost effective.
Designed very well to polish inspect tablets

We offer a complete range of tablet printing machines for pharmaceuticals industry. We offer our range of machines in standard as well as custom-designed specifications at competitive prices.
 

The bulk tablet counting machine available with us is immensely used in pharmaceutical industry. Its general features are its simple design, versatile operation, and lower maintenance.

This stainless steel slat conveyor suitable for conveying regular shaped container Available size of our stainless steel slat conveyor is : 4" or 6" wide and any length with SS or Derlin slat mounted on MS/SS frames with adjustable guide rails. Standard & GMP model. Fixed speed or with variable speed (Optional) provided with geared motor of 0.5 HP upwards depending upon the length and end use.

Suitable for manual labeling & cartooning operations provided with 9" or 12" wide canvas belt at the center of a MS or SS tables size: 2 ½' width x 3' ht x 2 meter length or as per requirement. Fixed speed or with variable speed (optional). Provided with geared motor of 0. 5 hp upwards depending upon the length and end use.

Forks 1150mm long (standard) but any length and width can be supplied as a factory built special. Available in 680mm, 540mm and 450mm widths (+ specials to order). Solid push rods and grease points all around. Wheel choices include nylon, steel and plastic wheels with urethane tyres. High quality seals and bearings. Hard chrome plated piston and ram. Reinforced frame. 3 position lever. High gloss finish.

Horizontal filter press (sparkler type) is used for crystal clear filtration of Pharmaceuticals. Chemicals, Beverages, Oil, Ink and other products. Our pharmaceutical filter press consists of a filter cartridge assembly with stainless steel filter plates, support screens interlocking cups. SS pressure vessel with lid. SS pump etc. It is mounted on SS trolley with castor wheels for mobility. The liquid is pumped into the vessel where it enters into the individual plates and filtered through the filter cloth or paper and comes out through a central channel formed by interlocking cups. The cake formed between the plates can be obtained if required. It can be provided with different types of pumps depending on the viscosity of liquid and output i.e. Centrifugal pump, Gear pump, Lobe pump etc. All contact parts in SS 304/316 quality & mirror polished. MS/SS jacket can be provided for hot filtration.

Suitable for washing of different sizes of glass/metal bottles from inside and outside. These bottle washing machines are completely GMP model with all contact parts in SS 304 and works on geneva mechanism. It consists of a rotary platform with specially designed cups to accommodate any size of bottles from 50 ml. Bottles are washed internally and externally at four different stations. The unit is provided with gear box, motor. SS pumps & SS tanks. Output can be between 75 to 100 bottles per minute with the help of variable speed pulley. Manual loading and unloading of the bottles. 

Each washing station is controlled by separate solenoid valve. Machine can be supplied in MS or SS body. Machine works on geneva mechanism and designed for minimum maintenance. No contamination of waters because of different washing nozzles. Washing sequence can be interchanged as per requirement. One tanks of 75 ltr. Capacity for fresh/DM water and one tank is provided with heater thermostat control and hot valve for detergent/hot water two pumps for pressurized water jet for internal and external cleaning. Top hood, bottle platform, nozzles and all contact parts in SS 304 quality. 

Most suitable for continuous processing or batch recycle of product. It consists of stator and rotor assembly. Rotor shaft is directly coupled to motor. Mechanical seal is provided at shaft entry. Our high shear mixer can be provided with different types of stator for various applications in pharmaceutical, chemical, cosmetic, rubber, paint & other industries. Capacity: 0.5 HP to 15 Hp (Standard and GMP Model) with SS 304 or SS 316 contact parts.
 

This semi automatic volumetric liquid filling machines is two head, table top, fully GMP model used to fill variety of liquids. Semi automatic volumetric liquid filling machine can be used for different types of glass. Plastic. Metal containers. The semi automatic volumetric liquid filling machine and tube filling machine works on volumetric principle and is fitted with two syringes on the sides. The motor and gear box are covered in a SS cabinet. The desired volume can be adjusted by increasing or decreasing the eccentricity. Bottles are kept bellow the nozzles manually. Output: 8/16/24 bottles per minute depending on type liquid and fill size with the help of three speed pulley arrangement. Four head machine can also be provided. 

Stirrer consists of different types of impeller fixed on a SS shaft and directly coupled to an electric motor. It can be directly mounted on the vessel or can be fixed on a separate movable stand with lowering and lifting arrangement. Fixed RPM or with variable AC frequency drive or with geared motor. Capacity: 0.25 HP to 15 HP (Standard and GMP model) with SS 304 or SS 316 contact parts.

This is used for mixing, suspending, milling, dispersing, disintegrating solids etc. & reduces batch time. It consists of stator and rotor assembly. The rotor rotates inside the stator assembly which is fixed with three tie rods to the motor. Rotor shaft is directly coupled to motor. It can be directly mounted on the vessel or can be hanged an a separate movable stand with lowering and lifting arrangement. Capacity: 0.25 HP to 15 HP (Standard and GMP Model) with SS 304 or SS 316 contact parts.

We specialize in manufacturing automatic liquid filling machines which are generally used in fill any type of liquid. 

Features:-
Easy operations
High performance
Corrosion resistance
Durable

Our specifically engineered automatic ROPP capping machine is suitable for cap sealing purposes in various industries. This machine is renowned for it's low noise and accurate functioning. It is highly durable, long lasting and cost effective in nature.

The automatic capsule loading machine is sturdy, compact in design and simple in operation. It is labor and time saving. This machine is best suited for medium/small scale pharmaceutical units. It gives higher production at lower cost and better standards of accuracy. 

Capacity: 

Fills 300-holes plate in 24 seconds giving an output of 3,60,000 capsules per 8-hour shift. Advantages: Excellent cost benefit ratio. To fill standard size capsules. Can be handled by semi-skilled personnel. Low investment, high output. 

Interchangeability:

Interchangeable parts can be supplied for standard size capsules. Recommended interchangeability for optimum Output: 00/0/1/2/3/4.

This is a most versatile capsule-filling machine suitable for all classes of pharmaceutical manufactures. It combines GMP design and construction. The equipment is simple to operate with no variation and with negligible rejection. The STD-Model is made of non-corrosive metal with stainless 304 quality for all parts that come into contact with the filling powder. 

Interchangeability: Interchangeable parts can be supplied for all standards sizes of capsules. Recommended interchangeability for optimum 

Output: 00/0/1/2/3/4/5.

Feeding section: 
This section compatible with stainless steel hopper and a vibrator with powder collector. As the capsules pass through vibrator some amount of powder get collected in the stainless steel collector because of vibration. 

Inspection section: This part of machine compatible with a conveyor belt and vary speed drive. Above this part of machine there is lighting source to inspect the capsules minutely. The capsules move on the conveyor belt and whole moving they revolve around their axis due to angular guides. This total visual inspection can be undertaken by a operator to sort out defective capsules. The defective capsules are sorted manually by plucker or by hand. 

This machine is most suitable for counting and packaging of capsules or tablets respectively. The machines design is very unique and extremely functional. The equipment is very simple to operate. 

Operation: 

The operation is completely automatic, after the basic setup. The operator has to only replenish tablets or capsules whenever required. The operations are controlled by the electrical switches provided. 

Changing over: 

Feed disc need to be changed to suit the shape and size of the product. Feed disc can be ordered with different numbers and sizes of pocket and can be interchanged in 5 minutes. 

"Nishelle Pharma Machines" has designed the printer for long run at high speed & easy handling. One operator can operate several machines. The entire operation of printing is automatic. The feed disk and the printing rollers is available in various sizes to obtain the highest efficient production. This printing machine is suitable for printing any shape & sizes of tablets & capsules, such as round, oval, triangular, square, etc. 

Operation: 
The operation is completely automatic, after the basic setup. The operator has to only replenish tablets or capsules and the ink reservoirs whenever required. The machine automatically feeds, positions, prints & ejects the said capsules or tablets. The operations are controlled by the electrical switches provided. 

The PCM-2 high speed automatic capsule machine is designed for faster production, accurate filling and less maintenance and cut in labour intensive. The rectification of capsules (cap up and body down style) has been very much improved. The filling section in the machine has a variable auger and filling tables speeds to enable accurate and quality filling. The locking of capsules is done much faster by the new enclosed below deck closure mechanism. The loading and the filling table have an automatic stopping system after completing a rotation of 360 degree revolution. Automatic positioning and return of the powder hopper.

We are engaged in exporting of different automatic capsule filling machine. The machine is ideal for filling capsules of various sizes with granules, powder and pellets. It is specially and skillfully designed to meet the precision production demands of modern pharmaceutical procedures.

The tube filling, crimping and coding machine is sturdy compact in design and simple in operation. It consists of an aluminium-rotating disc with interchangeable tube holding sockets for different tube sizes. The filling station is made of SS Block, fitted with pneumatic device to control tailing. No tube no fill process switches. (Electronic counter provided if required, not included in basic machine) SS plain hopper of 25 kg. Capacity. Non-return value fitted below the SS main filling block, Volume tracks for fine adjustments and weight accuracy. (Jacketted hopper along with stirrer provided optional). 

Semi automatic eight station aluminum tube filling & sealing machine
Description: 
The tube filling, crimping and coding machine is sturdy compact in design and simple in operation. It consists of an aluminium-rotating disc with interchangeable tube holding sockets for different tube sizes. The filling station is made of SS block, fitted with pneumatic device to control tailing. No tube no fill process switches. (electronic counter provided if required, not included in basic machine) ss plain hopper of 25 kg. Capacity. Non-return value fitted below the ss main filling block, volume tracks for fine adjustments and weight accuracy. (jacketted hopper along with stirrer provided optional). 

Manual tube filling machine /hand operated tube sealing machine
Suitable for aluminum/plastic/lami tubes of 5 gms. To 150 gms. Manually. Sealing machine suitable for folding the aluminium tubes by hand. Batch coding optional.

We specialize in offering superior quality automatic lami tube filling machines. These cutting edge machines are highly sustainable and available in various dimensional specifications. Along with this we also offers automatic sealing machines that are used to pack powders and granules.