Paltech offers both Counterflow & Crossflow design Cooling Towers with RCC/Wooden Structure for large scale Cooling Tower Applications. Different types and shapes of treated wooden splash bars, PCC Bars, Asbestos fills, PVC Bars, Polypropelene fills, etc. are used depending on application.

Paltech Pultruded FRP Cooling Towers are available with single cell capacity upto 5000 M3/Hr & Multi cell capacities upto any size in counter flow design with film fill & splash fill design.

Paltech, Pultruded FRP Cooling Towers which are not only efficient but also of ultimate quality, reliability and longevity. They are best suited for sea water application, as a replacement for old large Wooden Cooling Towers and as a new Cooling Tower instead of RCC or Wooden Cooling Towers.

STRUCTURE is made up of Pultruded Fiberglass material.

HARDWARE Hot dip galvanized are used to withstand corrosion. Stainless Steel hardware is available at extra cost.

CASING is made up of Pultruded FRP/Corrugated FRP Sheets of adequate thickness.

FAN DECK is made up of robust & Strong Pultruded FRP Panels/Sheets.

FRP FANS are of proven design provided by Indian Institute of Technology.

FAN CYLINDER is made up of tough & durable FRP/GRP material.

In FRP cooling towers production a special composition of raw materials are selected to withstand corrosion, to resist water borne bacterias and organisms & is light in weight which permits roof installation with special reinforcement of any kind. Vertical induced draft counter-flow design permits installation in any direction with freedom. It consumes less power (energy) overall because of less air resistance to water, saving in operational costs. Available in various colors matching to exterior architectural beauty. A direct driven axial fan ensures the system is free from problems faced with belt & gear drives.

• Casing: Paltech casing is constructed from FRP moulded panels suitably flanged. All joints sealed with water proof compound and bolted together with galvanised steel bolts or stainless steel bolts unless specified otherwise. Additional embossing is done for extra strength.
• Fill: General fill consists of Honeycomb PVC film type splash deck is modules with high resistant to corrosion & highly efficient for heat transfer .
• Fan: The fan consists of axial propeller fan blades of special alloy aluminium blades of designed aerofoil construction. The blades are of adjustable pitch connected to a common M.S.H.D.G./Aluminium Alloy Hub. The fan is statically balanced.FRP fan set can also be supplied on request at extra cost.
• Drift Eliminator: To reduce carry out losses through entrainment of moisture rops in the air stream by specially designed multiblade rotary drift eliminator made of FRP aluminium sheets.
• Motor: Special low RPM totally enclosed motors of Vertical, Flange type with enlarged & threaded shaft and sealed top is supplied with the cooling tower. The motor is also weather proof and in IP-55 construction.
• Water Distribution System: The hot water is raised by hot water riser & taken inside by a M.S.H.D.G./P.V.C. hot water header inside. Branch distribution pipes fitted with Polypropelene Splash cups / non clogging nozzles are connected to hot water header and uniform water distribution over entire fill is achieved.It is totally maintenance free distribution.
• Capacity Available : 3 TR to 1000 TR in single cell. Larger capacities are available in multiple cell construction.

PALTECH developed double crossflow induced draft Cooling Towers with basin, long recognized as finest for efficient & consistent performance. Its vertical discharge permits installation in areas not suited for tower with horizontal discharge.

Motor is mounted totally outside the fan cylinder. The device is so compact that it requires negligible maintenance as there is no troublesome complicated system of Housing, Bearing, Pulley & V Belts, Drive Shaft, Coupling & Gear Box.

In special cases where lifting & shifting of packaged cooling towers is not possible we can assemble cooling tower at site.

Packaged Tower casing top panel and access door are constructed of marine grade pressure treated plywood. Chemically treated pine wood is used for fills and other parts to withstand high inlet water temperature. In special cases where lifting and shifting of packaged cooling towers is not possible we can assemble cooling tower at site.

Specially designed and selected material of construction to suit very high temperature, contaminated or brakish water application (where PVC fills does not work & deform).

Medium capacity cooling towers are supplied with fan assembly driven through reduction gear reducer of spiral bevel type with the help of non-lubricated balanced drive shaft with flexible links. Fans are driven by an electric motor coupled to a gear box through a dynamically balanced tubular drive shaft. The complete equipment will be supported on a single fabricated mild steel frame adequately weather proofed.

All structural joints are bolted with galvanized bolts and S.S./Brass Nails. Stainless Steel or Phosphor Bronze hardwares can be supplied on request at extra cost. For uniform distribution of water, hot water basin is equipped with distribution box through which the water is equally distributed in the hot water basin & is further splashed downward through spray target nozzles.