• Description

Product Description

These gauges are suitable for Air, Oil, Gases and Liquids that are not corrosive to copper, oil and steel and for general Industrial Applications such as Boilers, Pumps, Compressors, machinery, Process & Chemical Plants. Case and Bezel is drawn steel, black finish and available in Bottom, Back Connection, Direct Mounting, Surface Mounting and Flush Panel Mounting;

Description:

Design
EN 837-1

Nominal size in mm
40, 50, 63, 80, 100 and 160
Accuracy class
2.5

Scale ranges
0 … 0.6 to 0 … 400 bar (NS 160: max. 40 bar)
or all other equivalent vacuum or combined pressure and vacuum ranges

Pressure limitation
Steady: 3/4 x full scale value
Fluctuating: 2/3 x full scale value
Short time: Full scale value

Permissible temperature
Ambient: -20 … +60 °C
Medium: +60 °C maximum

Temperature effect
When the temperature of the measuring system deviates
from the reference temperature (+20 °C): max. ±0.4 percentage/10 K of the span

Product Description

These gauges are ideal for Chemical and Fertilizer Plants, Refineries, Power Stations and where gauges are installed outdoors. Measuring System of Phosphor Bronze, Brass, SS 316 are available. Case of die cast aluminium with screwed bezel black epoxy coated. Exclusive protection IP55; Accuracy ±1percentage, Dial Size 100, 150 and 250mm; available in all standard process connections.

Available in all standard ranges vacuum and pressure upto 1000 kg/cm² standard connection 1/2″ NPT & 1/2″ BSP, other standards are also available. Receiver Gauge input 1 kg/cm².

Applications

• Intended for adverse service conditions where pulsating or vibration exists
• Suitable for all gaseous and liquid media that will not obstruct the pressure system or attack copper alloy parts
• Hydraulics
• Compressors, shipbuilding

Product Description

These gauges are suitable for low pressure measurement of non-corrosive gases, commercial heating, gas distribution and filtration. Measuring System of Brass or SS 304 Capsule. Case Material cast aluminium. Available in pressure range 0-50 mm WC upto 10000 mm WC in pressure, vacuum and compound ranges. Available in all standard process connections NPT, BSP etc. ; in dial sizes upto 150 mm Accuracy upto  ± 2percentage.

Applications

• Robust design and ingress protection IP 54
• For gaseous, dry and non-aggressive media
• Medical, vacuum, environmental, laboratory technology, for contents measurement and filter monitoring

Special Features

• Zero adjustment through window
• Stainless steel case
• Special location of connection on request
• Low scale ranges from 0 … 6 mbar

Product Description

Diaphragm sealed gauge commonly known as “chemical seal” gauge are designed and recommended to isolate the measuring system of a pressure gauge from corrosive, pasty or dangerous fluid depending on the viceosity, pressure, temperature, solidification of a particular process medium.

The diaphragm seal has been filled under vacuum with the transmitting liquid, the pressure gauge/diaphragm seal assembly must never be dismantled.

A carefully designed corrogated diaphragm is used to achieve maximum flexibility and linearity with sufficient stroke to provide the displacement needed to produce full deflection of the sensing element.

The diaphragm is argon arc welded to the top chamber to ensure a perfect selling “No LEAK”. In some cases the diaphragm is coated OR lined with a second membrane (teflon). The welded construction facilitates removal of the gauge for repair/service without process shut down.

The displacement of the diaphragm is transmitted to the bourdon sensing element, through solidly filled liquid having low cubical expansion with greater temperature stability.

The gauge indicator is either directly fitted with the sealed chamber OR by means of capillary tube, thus permitting easier mounting OR the remote reading of the pressure.

These Gauges are recommended where fluid is highly corrosive, contaminated, viscous or liable to crystallize inside measuring system. The gauge above the diaphragm seal is filled with silicon oil that transmits the pressure acting on the diaphragm to bourdon tube Diaphragm is welded to the upper part of sealed unit and therefore it is possible to seperate the upper and lower parts to clean the diaphragm without removing the gauge. Diaphragm can be ANSI 316. Tantalum, Hastelloy C and Monel. Pressure gauge can be of type 1, 3 and 5 and process connection with Standard threads or flanged connection confirming to ANSI, BS or DIN Specifications. Available in dial size 100 mm and 150 mm, Accuracy ±1percentage in all standard ranges.

Product Description

EDGEWISE DRAFT GAUGE (VERTICAL)

Product Description

To meet the demand of oil exploration and refineries ‘ANI’ has developed a gauge for the pressure measurement of ‘Crude Oil’ completely on the basis of their in-house development department know-how.

The gauge is designed as rugged and dependable keeping in view of application requirement of oil industries. To take care of vibration experienced in the Christmas tree suitable damping arrangement has been incorporated. Conventional indicating pointer has been eliminated and the dial moves alongwith the pressure vibration to indicate the variable against red mark on the case.

TECHNICAL SPECIFICATIONS

• Description

Product Description

These gauges are intended for measuring the pressure differential existing across two media or two parts of a system. All common pressure elements are used, as the application demands. The pressure element separates the two pressurised media, and deflects proportional to the difference in pressures between the media, irrespective of the absolute pressures applied. This deflection is converted into the rotation of a concentric pointer on a dial, similar to regular pressure gauges. The absolute value of either of the pressures is not usually indicated.

Product Description

Indfos pressure switch type PS/PSU is a triple pole device, meant to regulate pressure in small air compressors and water pressurization plants.

These switches cut off a 3-phase power supply when the pressure rises to a preset value and cuts in the power supply when the pressure falls to another predetermined value. Both cut off and cut in pressures are independently adjustable. All models are provided with a manual cut off switch (except PSU15X). Type PSU switch is additionally provided with a relief valve, which ensures load free starting of the compressor.

Product Description

Industrial pressure switch IPS, is an electromechanical device that senses changes in pressure and provides electrical contact closure at predetermined values. IPS pressure switch may be used to energize an alarm or may directly control the process by cycling pumps, shifting valves etc.

IPS is the most economic device in our wide range of pressure switches. The construction is simple, yet sturdy. The mechanism is enclosed in a dust proof mild steel casing and all parts are rust proofed for long life. Range and Differential values can be set independently and the device has clearly read out setting scale.

Product Description

Indfos RT Series Pressure switch is produced using technology provided by Danfoss Denmark. These Switches are sturdy, robust and reliable devices meant for Industrial applications. Over one million units have been used in a variety of applications.

RT Series pressure switches utilize a seamless bellows as sensing element. The bellows can be either phosphor bronze or stainless steel to suit various kinds of process medium. The mechanism is enclosed in a weather proof (IP66) enclosure which can be of either DMC or Die Cast Aluminium. Various kinds of switching elements can be provided to meet required electrical load specifications. Both Range and Differential can be independently adjusted. All models feature ± 1percentage repeatability and device has clearly read setting scale.

Product Description

Product Description

Type MP is a Single Pole double throw (SPDT) pressure control for stopping and starting small refrigeration compressors using CFC, HCFC, HFC, and R717 refrigerants. These switches are available in Low pressure, High pressure and Combined High/Low pressure versions.

The construction is simple and sturdy. The device is enclosed in a dust proofed mild steel casing and all parts are rust proofed for long life. Starting and stopping pressures can be set independently and the device has clearly read setting scale for reference.

MP series Pressure Switches find applications in

• Refrigeration Compressors
• Air Conditioning Compressors

Product Description

Series 200

Product Description

Award-winning in design and functionality

The successful design and the excellent functionality of the WIKA switch family were already confirmed by winning the “iF product design award 2009″ for the electronic pressure switch.

The robust LED display has been designed using 9 mm high characters (the largest possible) and with a slight incline in order to make reading the pressure as easy as possible from a long way off. A 14-segment display has been used, since it represents text very well.

The 3-key operation makes simple, intuitive menu navigation possible, with no need for additional assistance. The menu navigation conforms to the latest VDMA standard. A new VDMA standard for fluid sensors (24574-1, part 1 – pressure switches) has the aim of simplifying the use of pressure switches by standardising menu navigation and display.
The control keys have been designed as large as possible and are arranged ergonomically to ensure fast and easy adjustments. Operation without any additional assistance is made easier through the tactile feedback.

Description / Specification of Level Transmitters

We are involved in offering a wide range of Level Transmitters to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Level Transmitters. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Level Switches

We are involved in offering a wide range of Level Switches to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Level Switches. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Level Gauges

We are involved in offering a wide range of Level Gauges to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Level Gauges. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Rotameters

We are involved in offering a wide range of Rotameters to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Rotameters. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Flow Meters

We are involved in offering a wide range of Flow Meters to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Flow Meters. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Flow Switches

We are involved in offering a wide range of Flow Switches to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Flow Switches. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Product Description

Oil Meters are accurate, reliable and economical way of obtaining all the  information a user needs to control oil consumption in Generators, Boilers and to measure exact oil receipts.

Wherever oil is received, stored and used,Oil Meters measure, totalise and records flows precisely. oil meters can be installed in the pipeline and would totalise the flow of oil flowing through the line.

FEATURES

• 9 different sizes, compact types of PARSHALL flumes made of plastic (PP)
• Factory calibrated dimensions
• Reliable measurement with ultrasonic level transmitter
• Level transmitter can be used for all flumes types
• Displaying of flow measurement and average or total flow
• Certification of measurement

Product Description

Water meters are manufactured for the purpose of monitoring large flows of water for water system management and commercial billing purposes. We can offer helical vane meters with pulse outputs for operation with various auxiliary equipment. Different body lengths and material types are available to meet all requirements.

Combination meters are manufactured for installations where wide variation in flow can be expected, such as in hospitals, schools, offices and other places where both low and high flows can occur. These wide flow ranges are measured by using a built-in changeover valve together with a small residential meter and large bulk meter.

Large commercial single jet meters are also available which have a low flow capability, which makes them ideal for revenue collection.

All water meters are manufactured to meet International and National approval standards.

The diversity knows no limits

For all of our devices, we offer an extensive selection of accessory parts to help you benefit even more in your specific application area. Familiarize yourself with our offerings or let us advise you.

Product Description

A sensor alone does not make a safe workplace

Not until the safety sensors are efficiently and reliably integrated in the machine safety circuit can the topic of safety at work be implemented in such a way that the sensors do not interfere with the machine processes and yet still offer the best-possible protection. Our Safety Relays and AS-Interface solutions open all possibilities to you her

With a width of just 17.5 mm (MSI-RM2) and 22.5 mm (MSI-SR4, MSI-2H), these Safety Relays are characterized by very narrow housings. As a result, you can realize the one- or two-channel connection of safety-related sensors in a space-saving and simple manner over up to three switch-off circuits for many applications.

Everything clear even with poor visibility

Compared to conventional identification systems, RFID technology has one decisive advantage: no direct “visible contact” is necessary between the read/write unit and the transponder to read out information. An RFID system consists of a read/write unit, a transponder and the associated software. Information from the transponder is detected by means of electromagnetic waves. As a result, these systems can be used practically and reliably under even the most adverse conditions.

One of the big advantages of this technology becomes clear with stationary systems for RFID identification: in order to detect objects, it is enough to simply be “near” the reader. As a result, readers can be integrated at nearly any location in the system. In the area of RFID, Leuze electronic offers technical solutions that are oriented towards practical use. Their maximum connectivity with all common interface and fieldbus systems simplifies integration in existing systems.

RFID is also ideally suited for mobile use. One favorite area of application is, for example, in freight traffic at logistics hubs. But mobile devices are often advantageous in warehousing as well and guarantee smooth and fast identification. Moreover, our RFID solutions also read bar codes and 2D-codes.

The areas of application for RFID are as broad as the requirements placed on transponders. Leuze electronic offers an extensive and high-quality product segment for all conceivable applications. It includes transponders for fault-free use on metal, high-temperature transponders, self-adhesive SmartLabels or chip cards.

Product Description

Would you like another dimension with that?

Light section sensors are well suited for applications in which objects have to be detected using their 3 dimensional form. They measure height profiles along a projected laser line.With these sensors, objects with high resolution can be detected quickly and reliably in 3D. The object is illuminated solely by the laser measurement beam integrated in the sensor.

The profile camera is used wherever height profiles need to be determined for moving or static objects. An additional encoder port supports the generation of calibrated 3D data. This opens numerous application possibilities, such as robot guidance as well as contour/volume measurements.

Product Description

The intelligent eye for automation

Smart cameras are fast and flexible solutions for industrial image processing. They are very powerful and can be integrated quickly and at low cost. Smart cameras are used in the areas of quality assurance, object detection and position determination, for identification or for production process monitoring. These devices will win you over with their fully developed scope of service which makes reliably solving very complex tasks possible.

High-performance smart camera for reliable and convenient quality control and reliable code reading. For checking for presence, completeness, type, position and orientation. The device offers omnidirectional reading of the most important 1D- / 2D-codes with reference code comparison.

Product Description

Many beams see more than one

Measuring light curtains from Leuze electronic monitor a large measurement field and output measurement information from this field. Depending on the configuration and model, the devices are suitable for a variety of measurement tasks with various resolutions and can be integrated in different fieldbus environments.

Whether length, width or height measurement, positioning, hole recognition or multi-dimensional contour detection, this very fast, measuring light curtain is suitable for nearly every measurement task. With the easy-to-use Windows operating software, it can be quickly and easily adapted to the respective measurement task. The transmitter and receiver strips are available with various light-beam spacings and lengths of up to 3200 mm.

Product Description

Fork is just another word for exact

The forked shape offers measurement resolutions as great as 0.014 mm with high reproducibility without time-consuming alignment. An infrared light-band illuminates a line-scan camera (CCD line) and returns analog or digital output signals depending on the illuminated pixels and configuration.

With mouth widths of 27 or 100 mm, this forked photoelectric sensor delivers accurate measurement results over a 25 mm long measurement range thanks to its CCD line. Depending on the configuration, it is possible to measure transparent edges, the diameters of wires, threads and much more.

Product Description

Always know where you are

Particularly with moving system parts that need to automatically work together, the positioning of parts or work pieces with millimeter accuracy is of great importance. We offer devices here with two operating principles. One is a laser distance measurement device that measures absolute distances; the other is a bar code positioning system or an incremental device that measures movements along a reference tape.

The optical laser distance sensor is used everywhere that position data of moving system parts need to be calculated. With great accuracy and speed, the AMS300 i makes distance data available for dynamic control via a unique selection of industrial Ethernet and renowned fieldbus interfaces. Distances of up to 300 m are calculated through the use of state-of-the art signal processors in intervals on the order of ms.

Everything for safety

Whether individual devices or optimally matched sets: in our extensive line of safety sensors, you will always find a suitable and efficient safety solution for point-of-operation, danger-zone and access guarding. All devices satisfy the applicable legal regulations and standards.

Reliable and interference-immune sensor safety technology ensures high system availability and productivity. Thus, in addition to the safety standards, high industrial requirements also played a key role in the development of all Safety Light Curtains. Wherever man and machine work “hand in hand”, Safety Light Curtains can be used vertically as hand and finger protection, as access guarding as well as horizontally as area protection. With respect to integration capability, availability and cost effectiveness, they meet the highest requirements.

Multiple Light Beam Safety Devices with muting function ensure constant personnel protection (access guarding) with unobstructed material infeed, e.g., in conveyor systems. They thereby help to ensure that both the productivity requirements as well as the safety requirements are met for automated production systems. Options such as the integrated Laser Alignment Aid, an integrated muting indicator and the patented swivel mount for easy fastening and alignment round out the program.

Product Description

From extremely economical to extremely tough: it’s all there

Safety Switches and magnetically coded safety systems can be used to monitor movable guards such as protective doors, sliding grids or flaps, for example in the food, pharmaceutical or timber industries. Opening the protective devices triggers an E-STOP command. Safety Locking Devices keep the protective doors locked, thereby preventing the inadmissible access of people until the guarded machine no longer poses a danger. The access to the danger zone is only released by an electric signal when either the dangerous movement has stopped (personnel protection) or an uninterruptible work process has been finished (machine protection).

For doors, flaps and covers that must remain closed during the operation of machines, Safety Switches for position monitoring and for the protection of personnel and systems are required. They are predestined for guarding machines and systems in which process or production interruptions are, in principle, possible or may be necessary. In addition to standard designs for universal use, Safety Hinge Switches and Safety Position Switches are available as alternatives to hinge switches on flaps.

Safety Locking Devices keep protective doors securely locked and thereby prevent the inadmissible access of people until the guarded machine no longer poses a danger. Not until there is no longer a danger to the machine or to the workers is access released by an electric signal. The Safety Locking Devices thereby make an important contribution to personnel protection and machine protection. With their robust design, all Leuze electronic Safety Switches and Locking Devices are designed for rough industrial applications.

Product Description

A sensor alone does not make a safe workplace

Not until the safety sensors are efficiently and reliably integrated in the machine safety circuit can the topic of safety at work be implemented in such a way that the sensors do not interfere with the machine processes and yet still offer the best-possible protection. Our Safety Relays and AS-Interface solutions open all possibilities to you here.

With a width of just 17.5 mm (MSI-RM2) and 22.5 mm (MSI-SR4, MSI-2H), these Safety Relays are characterized by very narrow housings. As a result, you can realize the one- or two-channel connection of safety-related sensors in a space-saving and simple manner over up to three switch-off circuits for many applications.

With the programmable Safety Controllers, you obtain a system solution for small- to medium-size machines with maximum flexibility. In addition to the simple handling during start-up and the flexible configuration option with broad, on-board functionality, the simple expandability through safe I/O modules is an advantage. Communication modules for integration in the fieldbus level can also be integrated problem-free. Based on the MSIsafesoft programming software, the safety sensors of a machine can be efficiently integrated through the use of function modules and logic blocks.

Product Description

How to bend light around a corner

With the use of fiber optics and appropriate amplifiers, the area of application of optoelectronic sensors is considerably expanded. The flexible fiber optics with various head shapes can be integrated in nearly any system design. The detection range is dependent on the fiber optics and amplifiers used.

The optical fibers are plugged into the amplifier. Depending on the model, the ranges of the fibers and the available functions vary.

Depending on the area of application, we offer fiber optics made of plastic or glass.

For simple integration, each is available in a range of different designs and cross sections.

Product Description

Maximum precision for the smallest parts

The design of these sensors makes them the ideal choice for the detection of small parts. High sensitivities and fast reaction times facilitate simple and reliable integration of these sensors in fast automation processes.

This series, with mouth widths from 20 to 220 mm, can be optimally adapted to a given application by means of their sensitivity adjustment and light/dark switching. Laser variants can be used to reliably detect even the smallest parts.

The compact forked photoelectric sensor with a mouth width of 8 mm and a switching frequency of 1000 Hz is suitable for the detection of small parts and aperture discs.

Product Description

Nothing gets past these forks

Precise and fast detection – even at high web speeds – and the reliable detection of a wide range of material combinations and surfaces. These are the criteria professional sensors must meet for labeling applications. And here we offer the right solution for every application with our wide line of different designs and operating principles, from light to ultrasonics.

Optical forked photoelectric sensors with 3 mm mouth width for precise label detection in slim-line design.

For wider labels, this series with 60 mm mouth depth and short response time is ideal.

The capacitive forked sensor is particularly well suited for transparent labels without metallic coating.

These forked sensor are very well suited for the detection of foil labels, metallic-coated foil labels and thin metal foils.

With its large mouth width, this ultrasonic forked sensor is also suitable for fan-fold flyers and booklets.

Worth special mention are EasyTeach (press button – dispense labels – done!) and the ALC function (Auto Level Control: for online optimization of the switching threshold).

Product Description

I am many sensors

The switching light curtains from Leuze electronic are able to monitor a large measurement field and respond if sensor beams in the field are interrupted. Various resolutions and measurement field lengths enable reliable use in a variety of applications.

The system, which consists of transmitter and receiver, generates a monitoring field of many infrared light beams and produces a reliable switching signal as soon as objects penetrate this monitoring field. Easy installation, its small design as well as the integrated, configurable evaluation unit make the VARIO an economical and flexible sensor solution.

Product Description

The products in this area are characterized by their cubic design. With their various mounting options, they cover a wide range of installation situations. Here, you will find reliable sensors with different operating principles for a variety of detection tasks in a wide range of environmental conditions.

Product Description

The common characteristic of sensors from this area is their cylindrical design. This facilitates extremely simple and fast mounting in the system.

Product Description

The use of optoelectronic sensors in potentially explosive areas requires specially protected devices. Our extensive product line offers powerful sensors in all common technologies.

the sensors of the  Ex series are designed as diffuse reflection light scanners, retro-reflective photoelectric sensors or throughbeam photoelectric sensors and reliably detect objects at distances between 300 mm and 12 m. The intrinsically safe sensors transmit switching signals to the VS 403 isolated switching amplifier by way of the NAMUR interface. The temperature class for explosive gas areas is T6; for explosive dust areas it is 80°C.

The sensors are developed for all category 3G and 3D applications. With their small dimensions, they fit even in constrained spaces. The sensors and the protective housing are made of stainless steel and are also suitable for demanding operating conditions.

Currently available are retro-reflective photoelectric sensors and scanners with background suppression.

Product Description

These retro-reflective photoelectric sensors are specially designed for the reliable detection of transparent bottles, glasses and foils. They offer a high performance reserve and numerous technical features for efficient use.

Product Description

Always good when things get colorful

This sensor type detects colors and compares them to a stored reference value. They are the right solution whenever the color of an object or marking can serve as a sorting or inspection criteria. Depending on the configuration and specified tolerance values of the system, the result is output as a switching signal.

Thanks to extensive configuration options and 1 or 4 color channels with individually adjustable color tolerance, this series can be used for fast processes with short response times.

If only one color channel is needed, this compact design is both a simple as well as a reliable solution.

This series with 3 color channels and the scan function for color gradients can be used flexibly in many areas of applications.

Product Description

The contrast makes the difference

This sensor type can use various light sources – such as white light, laser-generated red light or RGB light – to very precisely detect and compare contrasts and report the results to the process with minimal signal jitter. Through the automatic selection of the right transmitter colors, various color or gray value combinations can be reliably detected.

Contrast scanners distinguish between grayscale values, enabling them to detect minimal contrasts. As a result, a check can be performed for the presence of text or imprints or so-called marks detected.

Product Description

Printing and further processing under control

Devices for ensuring system availability and the corresponding logistics in the graphics industry have been among our core competencies for decades. Not least of all because we have a great deal of practical experience and have application know-how from this business sector that has been collected over a decade.

The double sheet monitoring devices  reliably prevent multi-layer sheets from being drawn in. As a result, scrap and damage are reliably avoided with machines that process stacks of paper and cardboard.
The systems operate on the basis of various physical principles and are thus able to cover nearly the entire range of applications.

The systems for splice inspection and for multiple track label inspection mainly detect splices in roll machines or labels in further processing, and do so independently of the surface color and material properties.

Product Description

I see what you don’t see

This sensor detects both visible as well as invisible luminescent markings. It sends the result as switching output or analog value and is used primarily for sorting and inspection tasks in areas in which other detection methods fail to supply reliable results or where the markings should not or must not be visible.

With various light spot profiles, filters, transmitter variants and accessories, this compact design includes everything needed for detecting luminescent objects.

Product Description

The all-rounders among the sensors

Ultrasonic sensors are used whenever optical systems reach their limits. Hence, partially and fully transparent or extremely dark objects can be detected just as easily as objects with reflecting surfaces or objects in dusty, vaporous or humid environments.

This ultrasonic sensor features a high sound pressure and is thus suitable even for air transport systems.

From narrow to wide, this diffuse reflection ultrasonic scanner offers three different opening angles and sound lobes.

The cylindrical M12 design with two different opening angles ensures high flexibility during installation and use.

Short design, teachable and up to two independent switching outputs are the key features of this series. Also optionally available with angled head, which enables a sound outlet 90 degrees to the longitudinal axis of the M18 sensor.

Whenever large ranges are needed, the M30 sensors from the 430 series are the right choice. Two separate switching outputs can be set independently by means of potentiometer or PC software. A total of ten of these sensors can be easily synchronized with a cable.

Product Description

Hand shut off valves types BM are diaphragm operated shut off valves, which stops flow in pipelines on light tightening of hand wheel. These valves are available in straightway patterns.

A unique triple diaphragm design ensures complete shut off when the wheel is tightened and the valves can operate under full vacuum down to 76 cm Hg

Product Description

Solenoid valves type IMV/IMVD are normally closed type electromagnetic shut off valves, which on receiving an electric impluse, open to allow flow in pipelines. These valves are designed for use with Air, Oil, Water, Town gas, Methane, Propane and other process medium compatiable with its diaphragm material which is viton, and body material which is brass.

Description / Specification of Pid Controllers

We are involved in offering a wide range of Pid Controllers to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Pid Controllers. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of On Off Controllers

We are involved in offering a wide range of On Off Controllers to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  On Off Controllers. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Product Description

5002U is the legacy product with proven performance for versatile process control applications. It is a most popular On-Off controller delivering high performance since two decades. This model is available in 1/4 DIN Size metallic enclosure as well as Weather proof (IP 55) or flame proof enclosures in wall mounted options.

Product Description

Compact, Comprehensive and Cost Effective

5040 is much more than a controller capable for complex and demanding process control applications. The controller has accessibility of both hardware and software features in compact size making it a highly configurable product, offering many features found costly programmable controllers.

Product Description

Instant Monitoring, Accurate Control

40005 Bargraph Indicators are economic solution where instant process monitoring is important. It is available with single and dual Red color 101-segment display for relative monitoring of one or two process in single unit. It also shows numerical process value on 4-digit seven-segment and alarm status on front LEDs. Bargraph Indicator is a popular replacement for sight-glass or moving coil mechanical displays as a result of advanced functions and reliable performance.

Model-40005 accepts 12 popular field configurable inputs including Thermocouple, RTD, mA, V. It optionally provides two alarms per channel with individual programmable relays to inform operator for abnormal process conditions.

These Indicators can be interfaced with SCADA/PLC using RS485 communication and analog retransmission output for process automation. It has built-in function of square root extractor to display process value in linear unit. These interfaces and functions can be configured easily using front keys.

It has power supply option of SMPS (90-270VAC) or 24VDC. It is also equipped with transmitter power supply to excite field sensor/transmitter. Units-of-measure window allows the scale to be labeled.

Product Description

Largest Display with Advanced Features

405-4IN is the largest display Indicator which can be monitored up to distance of 160 feet (50 m). Its large digits facilitate process value to be monitored across wider geographical area in plant. It has all advanced features for monitoring and communication of process values.

This Indicator accepts 18 different industry standard inputs with high accuracy of 0.1percentage to measure temperature, pressure and other process variables. It can be interfaced with SCADA/PLC using RS485 communication and analog retransmission output for process automation. RS485 and retransmission parameters can be configured as per filed requirements.

Alarm can be configured for two set points which are indicated on front Status LEDs. This Indicator has SMPS power supply for smooth and reliable performance. It is also equipped with transmitter power supply.

Product Description

Largest Display with Advanced Features

405-4IN is the largest display Indicator which can be monitored up to distance of 160 feet (50 m). Its large digits facilitate process value to be monitored across wider geographical area in plant. It has all advanced features for monitoring and communication of process values.

This Indicator accepts 18 different industry standard inputs with high accuracy of 0.1percentage to measure temperature, pressure and other process variables. It can be interfaced with SCADA/PLC using RS485 communication and analog retransmission output for process automation. RS485 and retransmission parameters can be configured as per filed requirements.

Alarm can be configured for two set points which are indicated on front Status LEDs. This Indicator has SMPS power supply for smooth and reliable performance. It is also equipped with transmitter power supply.

Product Description

408 Digital Indicator has 0.8” bright seven-segment LED display with multiple input options available in 1/8 DIN Size. It accepts Thermocouple, RTD, Current and Voltage inputs to monitor process variables such as temperature, pressure, level, humidity, flow, etc.

It is microprocessor based indicator with high accuracy of 0.25percentage and field scalable ranges for application flexibility. This model is equipped with built-in transmitter power supply eliminating the need of additional supply to excite field transmitter.

It has three auxiliary power supply options of 110/230VAC or 24VDC. Weather-proof and Flame-proof enclosures options are also available for this product. Model 408 is the popular choice of OEM, system integrators and end users.

Product Description

409 Indicator has set of advanced features for measurement and monitoring of popular process variables. It accepts 21 popular field configurable inputs including Thermocouple, RTD, mA, V. It has programmable alarm functions and signal communication interface both digital and analog making it truly Smart Indicator in its range.

It has 5-digit seven-segment LED display with brightness control facilityto address process flow rate, weighing measurement applications with a high accuracy of 0.1percentage. Instant process monitoring is possible with front status indication LEDs. Data acquisition can be done on SCADA/PLC applications through RS485 for further process automation.

Model-409 has SMPS power supply for reliable performance in industrial power fluctuation conditions. It is also equipped with transmitter power supply. This model is available in compact footprint of 1/8 DIN size.

Product Description

 Concept

The TEIP11-PS signal converter transforms electrical signals, e.g.,

4 … 20 mA in 0.2 … 1 bar (3 … 15 psi). It is therefore a connecting

link between electrical/electronic and pneumatic systems. The signal

conversion process is similar to the patented force balance method.

Special features of the TEIP11-PS signal converter are its relatively

small dimensions and outstanding operational stability when subject

to shock and vibration. The converter can be subjected to loads up to

10 g with less than 1% effect on function.

The housing units are available in a variety of models to meet your

installation requirements. For potentially explosive conditions, units

that offer intrinsically safe operation or Explosion proof encapsulation

are available with international approval certificates for use

worldwide.

A variety of signal conversion ranges are available on the input and

output sides (see chapter Technical data, page 4) For auxiliary

power, compressed air at 1.4 bar (20 psi) may be required.

Product Description

Single/Dual and Three/Four output Signal Isolator

9000U series of Signal Isolators are rugged and accurate in performance, designed to accept wide range of voltage and current input signals. It isolates and regenerates or converts input to standard signals for further interfacing in automation environment.

9000U is available in two models, Single/Dual output and Three/Four output. Signal Isolator retransmits analog signal with galvanic isolation between the field and the receiving instrument. This allows ground or reference levels to float up to thousands of volts at its input terminals without contaminating input signal and saving control system from damage. Its higher noise rejection ratio ensures accurate and noise free signal conditioning.

With multiple outputs this model also acts as signal distributors. A typical application could be where the signal has to be distributed for indication on local panel, field control room, main control room and DCS system. 9000U has built-in transmitter power supply to drive field transmitters. It has both 90-265VAC and 24VDC power supply options. It is available in compact DIN rail mounting enclosure.

Product Description

Pressure Comparators

Comparison Test Pumps are lightweight pressure sources that are used to smoothly generate and set pressures at two test points, and the calibration is performed by comparing the result of a master gauge with the gauge under test. The customer needs to additionally order master gauges with these pumps to make use of them.

Application:

Site calibration of analog gauges and verification of pressure transmitters or switches.

Product Description

Dead Weight Testers are the most accurate and stable pressure standards and are widely used in industry, academia and research institutes to calibrate pressure measurement devices like pressure transmitters and pressure gauges &  Hydrotesting of pipeline. We also manufacturer of  Pneumatic Dead Weight Tester & Piston Gauge.

Applications:

Measurement of pressure, calibration of pressure transmitter, pressure gauges and pressure switches

Product Description

Precision Test Pressure Gauges offered by us are easy to use high accuracy pressure indicators. These can be used as reference indicator of pressure with comparison pumps and feature reliable mechanical construction & dial readout. Further, these are designed to deliver high accuracy in readings ± 0.25 percentage F.S.

Application

• Testing and Calibration Laboratories
• Test Benches/ Rigs
• Research & Development
• As Master Gauges in Process Industries

Product Description

Accurate performance

TCS 4050M is precision loop calibrator designed to provide enhanced performance with accuracy of 0.05percentage and 1µA resolution. TCS 4050M can power and read two-wire transmitter for its calibration or can simulate transmitter to calibrate read-out instruments.

Compact and simple

TCS 4050M is a compact, lightweight portable calibrator capable of measuring and simulating mV and mA signals. This simple to use calibrator has membrane keys offering drift-free performance and stability even in hostile environments.

Product Description

All-in-one functionality

UNICAL 3001M is multifunction calibrator with 17 different functions avoiding need to take several different measurement devices to the field. It can be used in both laboratory and site calibration purpose with various features.

Calibration is fast and easy

UNICAL 3001M provides accurate, fast and multifunction calibration facilities with easy to use functions. It has 5-digit 0.56″ Red LED display and individual function keys. Facilities like independent settings for zero/span, switch selectable digital nulling for offset cancellation and differential measurement enables higher calibration functionality.

Description / Specification of Blow Gun

We are involved in offering a wide range of Blow Gun to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Blow Gun. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Clean 1Touch Fittings For Driving Air Piping Kpq Kpg

We are involved in offering a wide range of Clean 1Touch Fittings For Driving Air Piping Kpq Kpg to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Clean 1Touch Fittings For Driving Air Piping Kpq Kpg. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Fr One Touch Fittings Manifold

We are involved in offering a wide range of Fr One Touch Fittings Manifold to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Fr One Touch Fittings Manifold. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Kfg2 Ss 316 Insert Fittings

We are involved in offering a wide range of Kfg2 Ss 316 Insert Fittings to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Kfg2 Ss 316 Insert Fittings. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Clean Speed Controller With One Touch Fittings As Fpq

We are involved in offering a wide range of Clean Speed Controller With One Touch Fittings As Fpq to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Clean Speed Controller With One Touch Fittings As Fpq. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Elbow Type (Metal Body)

We are involved in offering a wide range of Elbow Type (Metal Body) to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Elbow Type (Metal Body). Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Elbow Type And Universal Type

We are involved in offering a wide range of Elbow Type And Universal Type to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Elbow Type And Universal Type. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Large Flow In Line Type As

We are involved in offering a wide range of Large Flow In Line Type As to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Large Flow In Line Type As. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Exhaust Cleaner For Clean Room

We are involved in offering a wide range of Exhaust Cleaner For Clean Room to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Exhaust Cleaner For Clean Room. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Exhaust Cleaner Amc

We are involved in offering a wide range of Exhaust Cleaner Amc to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Exhaust Cleaner Amc. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Nylon Tubing T And Tia

We are involved in offering a wide range of Nylon Tubing T And Tia to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Nylon Tubing T And Tia. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Air Cylinder And Cj1

We are involved in offering a wide range of Air Cylinder And Cj1 to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Air Cylinder And Cj1. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Air Cylinder Short Type

We are involved in offering a wide range of Air Cylinder Short Type to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Air Cylinder Short Type. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Product Description

Product Description

Description / Specification of Clean Gas Filter

We are involved in offering a wide range of Clean Gas Filter to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Clean Gas Filter. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

• Highly effective for filtration of high temperature and high viscosity fluids.
• Ideal for high flow filtration (Max. 2000 L/min).
• Easy handling of filtered impurities

Description / Specification of High Precision Filter For Liquids

We are involved in offering a wide range of High Precision Filter For Liquids to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  High Precision Filter For Liquids. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

• Ideal for high flow filtration (Max. 350 L/min).
• Easy element replacement for V-band type (With cover anti-scattering mechanism)

• IP65
• With one-touch fitting
• With auto-shift function

Description / Specification of 3 Port Air Operated Valve

We are involved in offering a wide range of 3 Port Air Operated Valve to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  3 Port Air Operated Valve. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of 5 Port Solenoid Valve Iso Standard

We are involved in offering a wide range of 5 Port Solenoid Valve Iso Standard to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  5 Port Solenoid Valve Iso Standard. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Iso Interface Solenoid Valve

We are involved in offering a wide range of Iso Interface Solenoid Valve to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Iso Interface Solenoid Valve. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Air Hydro Booster

We are involved in offering a wide range of Air Hydro Booster to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Air Hydro Booster. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Compact Hydraulic Cylinder

We are involved in offering a wide range of Compact Hydraulic Cylinder to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Compact Hydraulic Cylinder. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Iso Standard Hydraulic Cylinder

We are involved in offering a wide range of Iso Standard Hydraulic Cylinder to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Iso Standard Hydraulic Cylinder. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Floating Pipe Type Oil Cooler Water Cooled

We are involved in offering a wide range of Floating Pipe Type Oil Cooler Water Cooled to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Floating Pipe Type Oil Cooler Water Cooled. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Fixed Pipe Type Oil Cooler Water Cooled

We are involved in offering a wide range of Fixed Pipe Type Oil Cooler Water Cooled to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Fixed Pipe Type Oil Cooler Water Cooled. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Line Filter Fh

We are involved in offering a wide range of Line Filter Fh to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Line Filter Fh. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Product Description

Analytical Balances offers exactly right performance and convenient features that you need to accomplish for the most sophisticated weighing tasks. You can weigh just about anything from really light weight samples to heavy weight objects and if you want to do more than “Basic Weighing” the 7 application Programs will let you Easily perform the following:

Product Description

Semi-Micro Balances offers exactly right performance and convenient features that you need to accomplish for the most sophisticated weighing tasks. You can weigh just about anything from really light weight samples to heavy weight objects and If you want to do more than “Basic Weighing” the 7 application Programs will let you easily perform the following:-

Product Description

Product Description

• High resolution upto 30,000 counts
• Easy to read (0.56″) bright Red LED display.
• High-Low Function.
• Built-in-rechargeable battery for continous use.
• Optional Remote display available for customer.
• Environmentally protected Load Cell.
• Back Rail Support provided.
• Rugged construction suitable for industrial environment.

Product Description

Accurate and stable, high safety and durability upper ring stand with ductile cast steel made load cell is made from material whole piece with good toughness & elastic deformability tool steel for better safety characteristics. Capacity range : 1. 5t~50t accuracy up to 1/3000 safety overload 250% of the rated capacity ultimate overload 500% of the capacity super bright red led display, clear, bright and easy viewing. Good supply with fast and stable display when under swinging. Attached with battery, no wire obstacle, easy & convenient for loading. 360º swivel hook, reliable & stable when weighing.
Construction:

• High special safety constructure load cell design to protect damage orin-accurate from overload: both patented in taiwan and u. S. A.
• Load cell connects to upper ring & bottom hook, with non-screw safety design to prevent loosen or breakage problems.
• Easy operated wireless remote control.

Product Description

Platform Scale are available in high resolution finish of up to 15,000 counts that make these easy to read (0.8″) high bright RED LED display as well as built-in-rechargeable battery option so as to provide for continuous usage. Here, our expertise also lies in making these platform scales available with optional remote display and with rugged construction that makes these suitable for meeting the requirements of industrial environment.

• High resolution upto 15,000 counts
• Easy to read (0.8″) High Bright RED LED display.
• Built-in-rechargeable battery continues use.
• Optional Remote Display available for customer.
• Environmentally protected Load Cell.
• Back Rail Support provided.
• Rugged construction suitable for industrial environment.

Product Description

• LCD Backlite display for easy view.
• Multiple Weighing units like gm, ct, pcs etc.
• Automatic External / Internal Calibration.
• Standard RS 232 interface for Printer.
• Big measuring chambers with Sliding Side & Top Doors.
• Specially design for jewellery Touch & Diamond Industry.
• Fastest response time with highly stable reading.

Product Description

• 2,00,000 Internal Resolutions
• Auto – Zero Tracking, Auto Calibration
• Backlite LCD/LED Display for easy viewing Function.
• 8 different weighing units such as g, ct, Tola etc.
• Piece Counting & Percentage Weighing Function.
• Inbuilt rechargeable battery for continous use.

Product Description

• LCD Backlite display for easy view.
• Multiple Weighing units like gm, ct, pcs etc.
• Automatic External Calibration.
• Standard RS 232 interface for Printer.
• Big measuring chambers with Sliding Side & Top Doors.
• Specially design for jewellery Touch & Diamond Industry.
• Fastest response time with highly stable reading.

Product Description

• Precise & Accurate reading.
• Compact and Space Saving.
• Backlit LED Display for easy viewing.
• Standard Battery Backup & Glass Windshield.

Product Description

HCB-200 Series digital beam scale is ideally suited for various professional markets (which include medical and fitness), and remains the perfect replacement for the old mechanical balance beam scale. The incredibly durable, yet portable, and is equipped with casters for easy mobility. The HCB-200H also features a mechanical height rod, allowing patients height to be taken the same time as weight. The portability and modularity really separate the HCB-200H, and give healthcare professionals a much better option than standard beam scales. The HCB-200H represents a true professional grade scale for years of uninterrupted operation.
Dual range personal scales are desinged for weighing patients in medical environment.
Scales equipped with height meter, can also measure the height of weighed patients up to 2 meters. Personal Scales are equipped with backlit LCD/LED measuring Indicator, powered either from main or from batteries.
Personal Scales can be manufactured in two solutions :

• With height meter (indicator installed on a pillar), HCB 200H,
• Without height meter (indicator installed to the weighing platform, HCB200

Product Description

The CTL 20B Pediatric scale is designed as an all-in-one unit with no moving parts, making it a breeze to clean. Citizen’s averaging weight technology guarantees incredible sensitivity for your smallest patients. The CTL- 20B is lightweight, yet durable enough for the health care professional on the move. An easy to read bakelite LCD/bright LED makes this infant scale perfect for quick and accurate measurements. It also includes a self- adhesive measuring ruler (infanto-meter) to assess baby’s height at the same time. Save Feature allows you to see what the last measurement was. Freeze features can hold the weight. All models feature Citizen’s top-quality manufacturing for long life and owner satisfaction.

• Specially used in infant/baby weighing
• Ideal for hospital/medical /pediatric purpose
• Govt. Health Dept.
• Models Approved by Govt. Of India

• Description

Product Description

CM 5F series of balances has been designed to meet high requirements for measuring small masses with high readability (d = 1 µg). They are equipped with graphic display with extended user menu. In order to guarantee proper accuracy of measurements, automatic system of calibration has been applied. Micro balance consists of two components. One of them contains electronic modules, and the other precise mechanical measuring system. Such solution guarantees elimination of temperature changes influencing the indication of the micro balance.

Micro balances series CM 5F are offered with one capacities – 5g, (with readability 1 µg.). Balances are equipped with esthetic, cylindrical shaped weighing chamber with aluminum draught shield. All elements of the weighing chamber are manufactured from glass or metal which minimalizes the influence of electrostatic charges on weighing result. Micro balance is equipped with user friendly menu. User has access to multiple functions and measuring units which allow for specification of working requirements. Micro balance software allows for composition of GLP procedures as standard printout or as freely definable non-standard printout. Balance series CM 5F is equipped with RS 232, PS/2 output and possibility of connecting additional display as standard.

Product Description

Micro Balances has been designed to meet high requirement for measuring small masses with high readability (d = 1 mg). They are equipped with graphic display/with user menu.

In order to guarantee proper accuracy of measurement, a half automatic system of external calibration with El standard weight has been applied.

Micro balance consist of two balance components. One of them contains electronic modules & other precise mechanical measuring system. Such solution guarantees elimination of temperature changes influencing the indication micro balance.

Micro balances series CM ore offered with 3 capacity 5grn. & 2lgrn (with readability 1 mg) balances are equipped with esthetic, cylindrical shaped weighing chamber with glass draft shieid. All elements of weighing chamber ore manufacture from glass or metal which minimize the influence of electro-static charges on weighing result. Micro Balance equipped with user friendly menu User has access to multiple functions & measuring units which allow for specification for working requirements. Micro Balances software allows for composition of GLP procedures as standard printout freely definable non-standard printout series.

Balances CM is equipped with Rs232, Ps2 o/p & possibility of connecting additional display as standard.

Product Description

CM 21P series of balances has been designed to meet high requirements for measuring small masses with readability of d= 1 µg. The weighing chamber has been specially designed for calibration of pipettes. Non-centrically located aperture in the upper part of the chamber makes it easier to insert a pipette. Such a Solution Limits possible air droughts. Pipette calibration may be Conducted with a closed weighing Chamber. Micro Balances are equipped with graphic display with extended user menu. In order to guarantee proper accuracy of measurements, automatic system of calibration has been applied. Micro balance consists of two components. One of them contains electronic modules, and the other precise mechanical measuring system. Such solution guarantees elimination of temperature changes influencing the indication of the micro balance.

Micro balance features aesthetic, cylindrical-shaped weighing chamber. All the elements of the weighing chamber are made of glass, which minimizes the influence of electrostatic charges on the weighing result. Micro balance software allows for composition of GLP procedures as standard printout or as freely definable non-standard printout. Balance series CM 21P is equipped with RS 232, PS/2 output and possibility of connecting additional display as standard.

Micro balances MXA/1/P series is equipped with infrared sensors enabling opening of measuring chamber door and activating user defined functions of tare or printout.

Product Description

• Halogen heating which is useful for removing Moisture from entire area of the sample .
• Selection from four profiles for drying.
• User friendly Visualization display for process of drying.
• User selected Periodic completion for heating
• Simplified keys for easy programming.
• User friendly operations with selectable temperature & time for analysis.
• Built-in RS232C Interface for PC or Printer.
• It gives detailed Print out of the analysis in compliance with GLP/GMP
  Standards.[Optional - CPR 02]
• Large LCD Display with A.E.P. (Advanced Eye Protection) (NEW)
  Improved Repeatability For Better Results.

Product Description

Determining the density of solids and liquids is an inseparable part of work of the laboratories . Traditional method of density determination requires from the operator many measurements and a lot of complex calculation. In result the operator ends with a density determination result which can be saddled with calculation and systematic errors. Additionally time that needs to be devoted to density calculation is long. In case of determining the density of solids and liquids with application of citizen density determination kit, the whole procedure is very much simplified and speeded up.

Time till the operator receives the density measurement is very short, as all the calculation is performed by the software of the weighing instrument, and operator’s activities is limited to:

• Operation of the keyboard of weighing instrument
• Placing the samples on the weighing pans of the kit
• Hanging the plunger.
• Density determination kit is additional equipment offered to citizen laboratory balances.
• The software for determination of density has following basic features:
  • simplicity of usage (all activities are described on the display of the balance)
  • reliability (all calculation is automatically performed by the balance’s software)
  • fast data processing (result is obtained after determination of sample mass in water or plunger mass in liquid) • accurate data processing (before every measurement of mass, display indication is automatically zeroed, this proves the density determination result to be reliable and real). Specifications

Product Description

This printer is useful to print the data from our any range of balances. This is also connected via RS 232 Interface connection.
PRINTER

• GLP / GMP Conform documentation of your results.
• It provides easily readable records on normal paper which last for years.
• It’s universal interface allows you to attach “CITIZEN” Balances & Scales via RS232C Interface.
• Complete documentation of all data including calibration, weighing results, correct date and time information even after power failure.
• Weighing results can be statistically evaluated. Mean value and standard deviation as well as the total weight are automatically printed out due to built-in statistics and totalization function.

Product Description

• Large LED display with auto backlite display.
• AC/Rechargeable battery operation.
• Tare/ Check Weighing function.
• 24 keys Embossed membrane keyboard
• External resolution.
• Optional RS 232 communication port and printer port.
• Selectable weighing unit (gm/kg)

Product Description

Counter Table Top Scales feature metal body construction and are made available in range from 0. 1gm-30kg. The offered table top scales are made available in high resolution up to 30,000 counts and feature bright RED LED display that makes these easy to read (0.6″). Further, these are made available with built-in-rechargeable battery for providing continuous usage with pole display also available for easy customer viewing.

• High resolution upto 30,000 counts
• Easy to read (0.6″) High bright RED LED display.
• Built-in-rechargeable battery continues use.
• Pole Display available for customer viewing.
• Piece counting function available.
• Environmentally protected Load Cell.
• Rust Proof Stainless Steel Platter.

Product Description

Applications

For the installation of pressure measuring instruments, gauge cocks, shut-off valves, pressure gauge syphons, snubbers and other component accessories.

Types of adapters

Male-female adapters are used where the size of the male thread is different from the female thread in the parts to be connected.

Female-female adapters are used where both components to be connected have male threads.

Male-male adapters are used where both components to be connected have female threads.

Self-sealing nipples (SS) are used to adapt a smaller size threaded connection to a larger one (e.g. G ¼ auf G ½). Due to their design, the nipples are self-sealing (i.e. the taper turned into the nipple presses into the bore of the pressure measuring instrument’s pressure channel connection. To protect against inadvertent release of the two threaded parts, they are secured with a special adhesive.

LH-RH unions per DIN 16283 have a right-hand thread on one side, and a left-hand thread on the other, which allow the component to be sealed and orientated into any direction required.

Union nuts with nipple per DIN 16284, enable mounting without having to change the orientation of the parts to be connected against each other. Solderless compression fitting with ferrule are used to connect pressure measuring instruments or fittings with pipelines from copper, steel and stainless steel. Particularly useful mounting, no solder or weld points. A sealing washer is included in the delivery.

Flange set with lens-type sealing ring is used for the assembly of high pressure measuring instruments (up to 4000 bar). Through the two threaded flanges, which are clamped by four bolts, the pressure measuring instrument can be positioned in any orientation required.

Weld-on adapters with male thread they are used with left-handed threads for connection with LH-RH union, and with right-handed threads (per EN 837-1) they are mainly found with direct pressure port entries.

Rotatable gauge adapters (swivel adapters) enable the orientation of pressure measuring instruments through a 360 ° range.

Product Description

Applications

• Snubbers for pressure measuring instruments are intended to suppress the effect of pressure surges and pressure pulses of the medium
• Stainless steel version for aggressive media, even in aggressive ambience
• Process industry: Machine building, general plant construction, chemical/petrochemical, power plants, mining, on- and offshore and environmental technology

Special Features

• Max. temperature 120 °C
• Nominal pressures up to 400 bar

Description

The snubber is adjustable (modification of the crosssectional flow) and can thus be adapted individually to the respective operating conditions. A readjustment during operation, if required, is possible at any time.

The pulsations and pressure surges in the medium, occurring e.g. in compressors, steam engines, hydraulic presses, tensile testing machines etc., are largely compensated by this snubber. This considerably increases the service life of the pressure measuring instrument and improves the reading accuracy. Standard version

Product Description

Applications

• Syphons protect pressure measuring instruments from pulsations in the medium and from excessive heating
• Cooling element for fluids, gases and vapours in pressure measurement
• For direct mounting to the pressure connection of the pressure measuring instrument or to the shut-off device (stopcock or valve) mounted underneath

Special Features

• Designs per DIN 16282 or to industrial standards
• Permissible temperatures to 400 °C
• Nominal pressures to 160 bar
• Materials: Steel (1.0039, 1.0345) and stainless steel (1.4571)

Description

Syphons per DIN 16282 U-form, form B, and trumpet form, form D, have a welding connection for the pressure tapping on the process side and a threaded connection on the instrument side.

In the industrial standard versions, threaded connections are also available for the pressure tapping on the process side.

U-form syphons are intended for horizontal pressure tapping; trumpet-form syphons are intended for vertical pressure tapping.
Inside the syphon, condensate is collected, which prevents the ingress of hot media into the measuring instrument. We recommend filling the syphon with a cooling separating liquid before commissioning the pressure line. Options

• Other connection threads
• Special pipe for high temperatures and working pressures
• Material: Monel
• 1.4571 stainless steel, oil and grease-free for oxygen service
• 3.1 / 3.2 material test certificate
• Pipe connectors for pressure measuring instruments, see data sheet

Description

Each thermowell is an important component of any temperature measurement point. It is used to separate the process from the surrounding area, thus protecting the environment and operating personnel and keeps aggressive media, high pressures and flow rates from the temperature sensor itself and thereby enables the thermometer to be exchanged during operation.
Based on the almost limitless application possibilities, there are a large number of variants, such as thermowell designs or materials. The type of process connection and the basic method of manufacture are important design differentiation criteria. A basic differentiation can be made between threaded and weld-in thermowells, and those with flange connections. Furthermore, one can differentiate between fabricated and solid-machined thermowells. Fabricated thermowells are constructed from a tube, that is closed at the tip by a welded solid tip. Solid-machined thermowells are manufactured from barstock.

Due to the heavy-duty design, these international design thermowells are the first choice for use the chemical and petrochemical industries and in plant construction.