MICRO ULTRASONIC
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to MICRO ULTRASONIC
3 In 1 Vacuum Casting Machine
Features
- S.S. & M.S. Body
- Heavy Duty Vacuum Pump.
- 1kg. Gold Melting Capacity.
- Arrangment of Degassing four Flasks of 4" x 7".
- Digital PID Temperature Controller.
- Digital Universal Timer.
- With Vibration System.
Technical Specification
- Electrical : 230V 50Hz. 1phashe.
- Temp. 1180°C
- Power consumption : 2Kw.
- Melter : Low Voltage 1kg. Capacity.
- Vacuum power 180 lpm or 325lpm on demand
Bottom Pouring Vacuum Casting Machine
Features
- Casting machine made up of Induction Heating Technology saves precious time and Power.
- Latest IGBT technology.
- It gives uniform mixing of metal.
- Continuous work is possible at high temperature.
- Low Maintenance and High efficiency is possible.
- Digital PID temperature controller.
- Interlocks : Over Heat; Over Current; Water Fail.
- Inert Gas pressure at top and High Vacuum ensures complet casting for Pressure Cast.
Burnout Furnace
Features:
- S.S. & M.S Body.
- High Density Ceramic Board and Brisk for low heat loss.
- Heavy Duty durable Thermocouple.
- Door switch for shock proof operation.
- Digital PID , programmable Temperature controller.
- Heavy Duty Heating elements.
- Working Inner size : 12"x 12" x 9" & 14" x 14" x 10" ( As per Size )
Investment Mixer
Features
- Five Tap Investment Mixer.
- Heavy Duty Vacuum Pump.
- Vibration System Included.
- Auto Timer Cut Off.
Technical Specification
- Electrical : 230V 50Hz. 1phashe./ 440 V ; 3 Phase.
- Power : 2kg
- Capacity : 4†X 7†Five / Three Flasks
- Speed : 0 -250rpm
- Vacuum : 325 / 600 lpm on demand.
Pressure Cast
Features
- It gives fast heat & saves valuable time.
- Latest IGBT Technology
- It gives uniform mixing of metal by churning.
- There is no coil failure and hence no machine down problem
- Work is possible at high temp.
- Higher temp. is possible
- Low maintenance
- High efficiency is possible
- Upper pressure ensures complete casting
- No oxidation
Temperature Control Panel
Features:
- Digital PID temperature controller.
- Auto + Manual
- 10 program for diferent casting process ( each program contains 16 steps )
- Over Current protection.
Technical Specifications:
- Electrical : 440V; 50Hz.; 3Ph Or 230V; 50Hz.; 1Ph.
- Sensor : "K" Type.
- Door cutoff switch.
Settling Tank
Setlling tank is one of the most important equipment in the jewellery making factories. Purpose is to catch the gold particles moving through water drainage.
Features
- Double Filter arrangment. ( 5 & 10 micron )
- Motorised Water level control ( Auto Water level )
- 1, 2 and 3 Tap.
- P.P. Body
- S.S. or P.P. Basin
Ultrasonic Cleaners
Cleaning Principles.
An ultrasonic cleaner relies on a process called cavitation to gently and thoroughly clean the surface of your parts. An ultrasonic transducer attached to the cleaning tank transmits high frequency (30kHz) sounds into the cleaning solution. During the low pressure stage of each sound wave tiny bubbles form and grow. During the high pressure stage these bubbles collapse, removing dirt, rust and other contaminants. This cleaning action can reach any exposed surface, even into deep crevices.
Ultrasonic cleaners use high frequency sound waves to create bubbles for loosening and removing dirt, scale, and other impurities from Industrial parts washers remove grease, soil, oil, abrasive dust, blast debris, swarf, paint, corrosion or other contaminants from the surfaces of components exiting a production line.
150W Ultrasonic Cleaner
An ultrasonic cleaner relies on a process called cavitation to gently and thoroughly clean the surface of your parts. An ultrasonic transducer attached to the cleaning tank transmits high frequency(30kHz) sounds into the cleaning solution. During the low pressurestage of each sound wave tiny bubbles form and grow. During the high pressure stage these bubbles collapse, removing dirt, rust and other contaminants. This cleaning action can reach any exposed surface, even into deep crevices.
600W Ultrasonic Cleaner
Main Features of the Machine:
- High Power 600W Ultrasonic Cleaner is used for Continuous running ( Working Time )
- Digital Temperature Controller.
- S.S. Body.
- Bottom / Side Bounding.
- Trolley type standing Model.
- Digital Universal Timer.
- Available in : 15lit.; 18lit.;25lit.; 30lit.
Plating Plant
Features:
- S.S. Body with Four Beaker Capacity.
- Dual Temperature Control for Two baths.
- TDS meter.
- Timer facility.
Technical Specifications:
- Electrical : 230V; 50hz; 1phase.
- Power : 2Kw for Heater.
- Capacity : 4Beakers of Two seperate Bath.
- Out Put : 20VDC ; 30Amp.
- Timer : Digital Timer.
Double Station Dust Collector
Features
- Double Aerodynamic hoods for better dust collection
- SS Top & Hood with Drawer
- Envelop Type Filter Bags of 20 nos
- With Locking Facility.
Technical Specification
- Electrical : 440V,50 Hz. 3Ph. / 230v A.C. 50Hz. single phase.
- Polishing Motor : ¾ HP Heavy Duty ;2800 rpm
- Blower Power : 1.5 Hp. Heavy Duty.
Lapping Machine
Features:
- Aerodynamic Hood for better dust collection.
- SS Top & MS Hood with Drawer.
- Envelop type filter bags ( 10nos. )
- With locking facility.
Technical Specifications:
- Electrical : 440V : 50Hz. : 3Ph. Or 230V : 50Hz. : 1Ph.
- Polishing Motor : 3/4 HP Heavy Duty 2800rpm
- Blower : 1HP Heavy Duty Blower.
Magnetic Polisher
Features
- 8” dia. Acrylic Bowl.
- Revers / Forward functions ( Automatic / Manual )
- S.S. media ( pins)
Technical Specification
- Electrical supply : 230v A.C. 50Hz. single phase
- Capacity : 400 gms
- Bowl : 8" * 5" ( D *H ).
- Motor : P.M.D.C. 0 -to- 2800 r.p.m
- Media : .5 mm & .3mm
- Timer : Auto time off
Single Station Dust Collector
Features
- Single Aerodynamic hoods for better dust collection
- SS Top & Hood with Drawer
- Envelop Type Filter Bags of 10 nos
- With Locking Facility.
Technical Specification
- Electrical : 440V,50 Hz. 3Ph. / 230v A.C. 50Hz. single phase.
- Polishing Motor : ¾ HP Heavy Duty ;2800 rpm
- Blower Power : 1Hp. Heavy Duty.
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
