The Laboratory filtration tools range comprises of Constant Flow Kit, Constant Pressure Kit, SDI kit, Pressure Vessels, Bench top models of Cross flow system , MAS(MICROFILT automated strainer),Candle filter & Nutsche filter. These are completely bench scalable systems with flexibility to use any filtration media with multiple combination to arrive at optimum filtration system.

MICROFILT Pressure Vessels with varying sizes. It used for holding sterile /non-sterile liquids. Ideal accessories for filtration of small size batches.

Standard various capacities are available 1, 2, 3, 5, 10, 15, 10, 25, 40, 50, 60, 100, 150, 200, 250 (litres).
Customize capacities also available.

MICROFILT provide a SDI test kit is to assess the extent of suspended particulate (solids and colloidal) contamination in water & can be applied in process solutions also. A SLIT DENSITY INDEX (SDI), also referred to as Fouling Index. Although most systems have some pre-treatment these fine particles are responsible for the fouling of reverse osmosis membranes. In order to measure the degree of this fouling problem, a concept called Silt Density Index is used. High Index waters are measure of dirty, and contaminated, low index waters are clean and indicate suitability for the process. The SDI of the feed water is directly related to the filtration costs.

MICROFILT SDI Kit consist of:

Inexpensive flow control kit.
Calibration and shutdown are made much easier by using a valve to control the water flow.
Pack of 25 membrane.
Required Instruments, valves etc.

MICROFILT Filter Holder is provided for the sanitary/non-sanitary filtration application in various industry. This is made up of SS 316 or customize design. We provide Filter Holder which is completely disassembled so as to clean easily. Our Filter Holder allow you to seal the filter media by hand with tightening and locking wing nuts. Filter holder are of varying sizes 47mm, 90 mm, 142mm, 293 mm.

MICROFILT Filter Holder Consist of:

This pad holder is completely disassembled which is easy for cleaning.
Filtering small batches of liquid therefore use of separate pressure filtration vessel minimizes.
Compact, user friendly & ideal for clean rooms.

Constant Pressure Kit can assist in determining the appropriate filtration system for a specific application at constant pressure. The Constant Pressure Kit requires only an electrical power source for the compressor & 3-4 feet of bench space.

MICROFILT Constant Pressure Kit consists of:

Appropriate volume pressure vessel with accessories.
Flat sheet holder for depth as well as surface filtration. Customized holders also can hold filter cakes.
Required Instruments, valves etc.

Constant Flow Kit can assist in determining the appropriate filtration system for a specific application at constant flow. The constant flow kit requires only an electrical power source for the pump & 3-4 feet of bench space.

MICROFILT Constant Pressure Kit consists of:

Appropriate pump with accessories.
Flat sheet holder for depth as well as surface filtration. Customized holders also can hold filter cakes.
Required Instruments, valves etc

Bench Top Cross Flow Filtration Kit consists of microfiltration ultrafiltration combination with nanofiltration. Designed to suit the critical requirement of industry specific application right from high end Biotech system to a very low end effluent treatment. This system contain ceramic and polymeric membrane varying molecular cut off rating depends on application.

Useful for laboratory scale and pilot scale application.
Easy to installation.
Easy scalable.

Bench scale kit of MAS 207 is available which is most useful for laboratory practices.Microfilt Automated Strainer (MAS) are offered in several configurations requiring filtration from more than 1000 microns to less than 20 for liquids very high in viscosity in excess of 1 lac cp.MAS filters are ideal for continuous flow (and therefore batch) applications. Various MAS model are also available.

Eliminates the need for disposable media for many applications.
Mechanically cleaned in place filter.
Choice of various metal cleanable media.

Laboratory NUTSCHE filter, which is useful for various trial practices in laboratory & pilot scale. NUTSCHE filter batch filtration technique that uses vacuum / pressure in a closed vessel this is mostly used in chemical and pharmaceuticals industries. The system consists of closed filter vessels with filtration media. In this filter, filtration solid/liquid slurry aided by pressurizing the vessels /applying the vacuum.

Easy to handle/operation.
Easy product/ cake can be recovered cleanly.
CIP/SIP is possible.
Useful for laboratory & pilot scale practices.

MICROFILT provide small CATRECO TM as solid/liquid separation kit especially for laboratory bench scale operation. CATRECOTM is a MICROFILT system specifically designed to cater to filtration needs of organic process industries manufacturing fine chemicals, bulk drugs, drug intermediates, agrochemicals, dyes intermediates etc. CATRECOTM is bulk solid Recovery/removal System. Specific to recovery of catalysts for Hydrogenation which recycles the expensive catalysts used in the reaction.

Minimum hold up.
Enclosed system with compact design.
Backwash cycle.