Description / Specification of A.C Arc Welding Transformers

We are involved in offering a wide range of A.C Arc Welding Transformers to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  A.C Arc Welding Transformers. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Application benefits :

Suitable for all kinds of electrodes like rutile, basic and cellulosic
Feedback systems throughout the entire range for arc stability especially in the case of 6010 cellulosic, 6013 & 7018 electrodes
Prevents electrode freezing
Low demand of primary current for starting
Most suitable for AC Aluminium Tig welding

Features :

MTW 400/600/1200
A6 Series

Sturdy and proven construction to withstand extraordinary welding environments
Fully Thyristorised full wave, infinitely variable current setting over the entire range from 10 Amps to rated current
Automatic current stabilisation
Finger touch control
Permanently lubricated cooling fan for low noise
Modular design of PCB, plug-in system reduces downtime. PCBs housed in additional steel enclosure for damage-free protection
Outer casing specially designed and treated to withstand exposure to any offshore climatic condition

Features :

Chopper 400/500/600

Sturdy and proven construction to withstand extraordinary welding environments
Rugged construction for long life and least maintenance
Very high power factor
Stepless current regulator over the entire range
Constant current characteristic regardless of + 10% or - 15% voltage fluctuation
Fully protected against single phasing and short-circuiting
Thermally protected against overload, under voltage and abnormal supply or site condition
Specially designed for insensitivity to voltage transience due to galvanic separation from the mains
Intelligent fit-up of active component on the low voltage side makes the PWM chopper series more reliable, resulting in faster control and better welding

INTRODUCING FFDC TECHNOLOGY

Phantom 200

MEMCO has introduced its new range of high performance portable welders for Stick & TIG DC applications
A compact lightweight power-efficient champion
Indigenously designed, compact and portable
Inbuilt Hot start, Arc force, effective prevention of electrode freezing, Anti-sticking, VRD (Safe Welding Device) and Energy technology.
Low noise, spatter less welding.
All position welding current characteristics with higher reserved open circuit voltage.
Low input KVA rating.
Immunity from AC input voltage fluctuation with built in overload and thermostat protection.
Superior performance, proven even for critical welding.

(Also applicable for TIG Welding)

Genex 300-400-500
2 Wheel

High performance, low-consumption Diesel Arc Welder
Extra smooth arc with Arc Force, Hot Start and Anti-Sticking
Allows use of long cable up to 100 meters without loss of arc performance
Lower maintenance, brushless generator enhances welding capacity as well as engine life
Trailer mounted 2/4 wheels with towing bar. Available also in skid mounting
Air / Water-cooled
Facility for TIG provided
Welding kit provided
For TIG and MMA welding process, range of modules available in different capacities – 225 amps, 325 amps, 400 amps and 500 amps
Copper alternator winding, liquid-looped diesel engine for long life and fuel 

Description / Specification of Memco Ac Welder For Tig And Gtaw Welding Process

We are involved in offering a wide range of Memco Ac Welder For Tig And Gtaw Welding Process to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Memco Ac Welder For Tig And Gtaw Welding Process. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

(Also suitable for MMA Welding)

Model MTW 400-1200
A6 series

MTW-A6 series rectifiers are provided with changeover switch from manual to TIG process. This cuts off the initial surge facility not required in the TIG process
Fully thyristorised full wave, infinitely variable current setting over the entire range from 10 Amps to rated current.
Remote ON/OFF system.
Energy saver and upslope/downslope with external Hot Start adjustable time feature.
External high frequency unit
Automatic current stabilisation,
Finger touch control.

Ideal for thin sheet welding like expansion bellow joints where heat is to be limited to avoid burn-through
Upslope and downslope facility is also available without pulse.

Chopper design for extra smooth performance
Arc reduction with low spatter level contributing to higher productivity
Suitable for MMAW & GTAW (DC TIC & Lift Arc) Excellent dynamic response and fully equipped panel makes this chopper particularly suitable for welding Carbon Steel, Stainless Steel, Copper and Titanium in applications requiring top quality welding
Rugged construction for long life and least maintenance

(Also suitable for MMA Welding)

Phantom 400HF
Phantom Pluse HF

The most advanced inverter power management in the welding industry. Built-in gas solenoid for pre-flow, post-flow of gas and HF
Includes remote ON / OFF system, suitable cooling technology known as PPTT
Unique Lift-Arc TIG start, without use of HF
Power sources for inverter TIG DC and MMA welding range from 140 Amps to 400Amps are available in HF

Main Functions (WSE-250)

Multi-functions: AC TIG, DC TIG, DC pulse TIG and MMA welding.
Adjustable: AC TIG frequency, cleaning control, pulse frequency, gas pre-flow/post-flow, up-down time and welding current etc.
2 / 4-step switch function in TIG welding.
Stable- Arc circuit guarantees welding stabilisation at low currents while reducing noise levels.
Protective functions: Overheat, over-current and under-voltage.

Also applicable for TIG Welding)

Genex 300-400-500
2 Wheel

High performance, low-consumption Diesel Arc Welder.
Extra smooth arc with Arc Force, Hot Start and Anti-Sticking.
Allows long cable up to 100 meters without loss of arc performance.
Lower maintenance, brushless generator enhances welding capacity as well as engine life.
Trailer mounted 2/4 wheels with towing bar. Available also in skid mounting.
Air / Water-cooled.

Modular, Automatic, Fully Thyristorised, Full Wave Output Submerged Arc Welding System - Three-wheel tractor

3-Wheel Tractor mounted to travel directly on plates with or without rails with steering facility.
Spotlight to check welding alignment
Self-driven mechanised Fully Thyristorised, Tractor-driven, including automatic current stabiliser for both motors
Swivel-based Control Panel detachable with Remote Control Operation facility
Flux Hopper, Wire Spool Holder with Feeder, Wire-straightened
Ideally suited for heavy long seam welding, fabrication of long Beams, Columns Girders, Bottom Plates of Storage Tanks and Ship Decks.
Electrolytic grade copper wound with 100% duty cycle, housed in steel structural frame. Outer casing is duly phosphate and powder-coated to withstand any offshore or tropical conditions.

Description / Specification of Memco Rotators

We are involved in offering a wide range of Memco Rotators to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Memco Rotators. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Column And Boom

We are involved in offering a wide range of Column And Boom to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Column And Boom. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Memco Positioners

We are involved in offering a wide range of Memco Positioners to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Memco Positioners. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Welder-friendly :

Enables long and continuous operation at one stage with the use of extendable “magnetic rail track extension”
Less tiring and time-saving for the operator through easily programmable unit with wire remote control
Reduces ill-effects of intense arc light and hazardous fumes – typical of all welding operation

REVOLUTIONARY “NEEDLE BEAM” TECHNOLOGY
-- its superiority to other air plasmas

Highly improved air swirl in the torch coupled with a refined design of electrode and nozzle results in a very constricted needle-like plasma beam.

The benefits are :

Dross-free and taper-free cut
Extremely low power consumption for cutting any given thickness as compared to other machines.
Minimum change in metallurgical properties of the cut metal/base metal

Most economical as compared to other machines

Improved cooling of torch results in extremely high consumable life
Less metal wastage due to highly constricted plasma
High cutting speeds at very low power consumption
Minimum post cutting operations due to dross and taper free cutting
Simple, rugged power source for trouble-free operation with minimum maintenance

Unique features of MEMCO Plasma Cutting Machines

Right angle torch designed for maximum convenience of operator
Simple and easy to operate front panel
Well designed transformer with extra large high speed cooling fan for 100% duty cycle
Protection provided for power source and torch
High quality air filter with moisture remover for best performance

Description / Specification of Memco Gas Plasma Cutting Machine

We are involved in offering a wide range of Memco Gas Plasma Cutting Machine to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Memco Gas Plasma Cutting Machine. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Model KUT- 100

Portable Frame Cutting Machine

Straight line or Circular cuts upto 90mm thickness
Bevel cuts 450
Dynamically balanced armature for ultra smooth drive
Counter balancing enables larger torch-machine distance
Precise control and proven performance

Description / Specification of Electrode Drying Ovens

We are involved in offering a wide range of Electrode Drying Ovens to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Electrode Drying Ovens. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design