Pneumatic presses used in all types of industrial settings. KJN Enterprises manufacturing pneumatic presses for more than 25 years. Pneumatic Presses common applications are: Compacting, Blanking, Extruding, Marking, Cupping, Peening, Deep Drawing, Flaring, Punching, Rivetting, Notching, Cutting etc., India.

Technical Specifications of Pneumatic Presses, Conventional, Toggle and Impact Presses :

Pneumatic Pressing Tonnage:
50 Kg to 5 Tonnes

Type of Frame :
C - Frame, Single Pillar, 2 - Pillar, 4 - Pillar

Pneumatic Conventional Press, Tandem Press, Impact Press and Toggle Press. Our base plates are manufactured from prime-quality MS with the working surface ground and hard chrome plated for long rust-free life.

Base Plate :

Our base plates are manufactured from prime-quality MS with the working surface ground and hard chrome plated for long rust-free life. Various Base plate construction options are available. Please refer our Questionnaire for the same.

Controls :

Pneumatic Presses can be operated in many ways. It can be completely PLC controlled or can be operated by a simple hand lever valve. Please refer our Questionnaire for the various control options available.

Additional Features :

Many additional features can be provided on the Pneumatic Presses for ease of operation, safety of the operator and better finish of the component being Pneumatic Presses. The various features that can be provided are listed in the Questionnaire. Please refer our Questionnaire for further information.

In line with our company's policy of complete customer satisfaction. We not only offer our standard line of Pneumatic Presses but also offer Pneumatic Machines custom built to requirement of the client. Some of these Special Purpose Machines are enlisted below :

Special Purpose Machines :

We will be glad to study your application and design a Special Purpose Machines just for you.

Gold and Platinum Brick Machines / Bar Shearing Machines
Spruce Cutting Machines
Cap Crimping Machines
Suitcase Lock Testing Machines
Lid Closing Machines
Pneumatic Press of various types to work in explosive and flammable areas
Pneumatic Shearing Machines

We offer a complete range of Pneumatic Cylinders that include :

Standard Pneumatic Cylinders

Our standard range of pneumatic cylinders are available in Bore sizes ranging from 6mm diameter to 350mm diameter with strokes starting from 15mm to 1000mm long. These pneumatic cylinders are made of hard chrome plated heavy duty seamless tubes, C.I. end covers, hard chrome plated EN-8 piston rods and high quality neoprene/nitrile seals.

ISO Pneumatic Cylinders

Pneumatic cylinders are made as per ISO pneumatic cylinders 6431 standards. ISO Pneumatic Cylinders are available in Bore size starting from 32mm and with all types of ISO Pneumatic Cylinders mountings.

Special Construction Pneumatic Cylinders

These pneumatic cylinders, like our SPMs, are made as per client's requirement. Some examples of these pneumatic cylinders are: Magnetic Reed Switch-Type Position Sensing Pneumatic Cylinders, Hollow Shaft Cylinders, Stroke Adjustment Cylinders, Tandem Cylinders, Impact Cylinders, Continuously reciprocating Pneumatic Cylinders, Pneumatic Cylinders Special Construction Cylinders, Large Bore - 350 mm Cylinders etc.

Air Blowguns, Push Button Air Blowguns, Air Blowguns With Air Amplification Nozzles, Air Blowguns With Lever, Air Blowguns With Lever and 4" Long SS Nozzle.

Application of Air Blowguns :

For blowing off dirt, dust, oil etc. from shop floor, surfaces, machine working area, deep holes, crevices, geometric patterns, etc. and any hard to reach places. While a 3mm standard nozzle is part of the guns we can instead provide any of the Nozzles described in Nex Flow portion of this catalog ahead at an extra cost.

Construction of Air Blowguns :

Rugged construction, built to last. Air Blowguns are machined from solid Aluminium bar-stock with all other parts of Brass. Due to its ergonomic design the air blowguns easily fits in the palm of the operator's hand. Even continuous operation does not cause any fatigue to the operator.

Operating Condition of Air Blowguns :

Clean dry Air at 2Kg / Cm2 to 8Kg / Cm2

Material of construction of Air Blowguns :

Body : Bar Stock Aluminium.

Nozzle, Plunger and Nut : Brass

Seals and 'O' Ring : Nitrile Rubber ( Viton can be made availabe for special cases, at extra cost)

Pneumatic Timers

Part of many pneumatic circuits. These are used to provide a time delay of 1 to 10 or 3 to 30 or 10 to 60 seconds in a pneumatic circuit.

Pneumatic Control Valves

Directional Control Valves

Our simple but rugged design DCVs have found wide acceptance in the industry for more than two decades as they can perform in the toughest of working environments. Directional Control Valves are available in sizes ranging from 1/8" to 1" BSP. These DCVs can be operated by a range of Manual, Machine, Solenoid or Pilot operations.

Compact Solenoid DCVs

They are available in 1/8" BSP and 1/4" BSP port sizes. These compact DCVs are ideal for applications where space is a major constraint. Due to their sophisticated design these DCVs consume very little power, they operate on only 3 Watt of DC power. These DCVs can be assembled into gangs of pneumatic valves tailor made for your application.

Non-Return Valves

Simple and rugged design Pneumatic Valves these are available in sizes 1/4" to 1" BSP. They are used in applications where uni-directional flow is required.

Flow Control Valves

They find application in pneumatic circuits where finite flow control of air is required. The unique design of KJN Flow Control Valves does away with the cumbersome locknut required in valves of other make. Flow Control Valves are available for port sizes ranging from 1/8" to 1" BSP.

Quick Exhaust Valves

These find application in a pneumatic circuit where unrestricted, direct exhaust from a pressurized system is required. Example of such an application would be increased speed of a cylinder piston by allowing quick exhaust of the back pressure on the piston. Quick Exhaust Valves are available for port sizes ranging from 1/16" to 1"BSP.

Pneumatic Rotary Valves

Pneumatic Rotary Valves is a type of DCV. Pneumatic Rotary Valves are available in 2-way, 3-way or 4-way constructions with a knob or handle for operation. These find application in instrument pneumatic rotary valves, control panels, air-started generators, material handling equipment, etc. Pneumatic Rotary Valves are available in 1/4" to 1" BSP port sizes.

Special Application Valves

We have developed many pneumatic rotary valves for special applications. Some of the most common Pneumatic Rotary Valves are listed below :
Rotary Switch Valves : Similar to Pneumatic Rotary Valves in construction, it has a common outlet and four inlet ports or vise a versa. The Switch provides selection of connecting any one inlet with one outlet per position.
Key Operated Valves : Essentially a spool type DCV. These pneumatic rotary valves are made mainly for applications where unauthorized or erroneous control panels is to be prevented.
Automatic Signal Lock-up Relay : These are relays which auto-matically lock-up the transmitted signal when the supply pressure falls. They are mainly used with Diaphragm Control Valves to maintain position when supply pressure fails.

Superior designed Air Jets reduce compressed air consumption and noise levels while maintaining laminar flow for strong blowoff. Air Jets entrain large volumes of surrounding air through the Jet (similar to Air Amplifiers) and are more efficient than Air Nozzles. They cover a larger blowoff target than a Nozzle and ideal especially for part ejection.

All Nex Flow™ Air Jets meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically reduced with Air Jets in addition to lower energy use.

The Nex Flow™ High Force Air Jet is also a High Velocity Air Jet. All the air jets are adjustable. With an Adjustable Air Jet the flow and force can be set and "locked" in place with the lock ring for your particular application.

From Left to right is the High Flow Air Jet (Model 45001) the High Force Air Jet (Model 45002) and the Mini Air Jet (Model 45003)

Model 45001/45002 - High Flow Air Jet and High Force Air Jet are physically the same size. The only difference is a larger exit opening in the High Flow version for the amplified air flow. The high flow system is used more for cooling and light blow-off while the high force version is used mainly for heavier blow-off applications.

Model 45002B - High Force Air Jet in brass. The gap can be set and locked into place. The gap setting value is marked on the air jet body for accurate setting. Ideal for heavy blow-off applications

Model 45002S - High Force Air Jet in 316L Stainless Steel. The gap can be set and locked into place. The gap setting value is marked on the air jet body for accurate setting. Ideal for high temperature and for food service heavy blow-off applications.

Model 45003 - Mini Air Jet is the most compact air jet with high force, is adjustable and ideal for tight spaces. This is unique to Nex Flow™ and there is no equivalent competitive system.

Model 45004 - Fat Air Jet Air Amplifier is the largest flat jet/smallest air amplifier with the same design as the high performance air jets to give you the most optimal performance with an adjustable gap and lock ring to set the gap in place.

PRODUCT OVERVIEW

Air Knife Systems utilize compressed air for industrial blow off and cooling applications. Used extensively for replacing rows of nozzles or jets or drilled pipe to reduce energy. The curtain like airflow of the Air Knife is an efficient way to dry, clean, and cool.

Applications includes the removal of excess oils, liquids, and dust. The Air Knife is used in printing, labeling and packaging, and used in part or component cooling, Industries include: Converting and Packaging, Films and Laminating, Form and Fill, Sheet and Web Materials of all types from film to metals, Bag opening/fill operations, Conveying or hold down, Food Processing, Paint preparation and drying.

Aluminum Standard Air Blade™ Air Knives

Built and designed for significantly longer life in difficult environments than many competing products by anodizing the aluminum body.  Stainless steel shim maintains gap integrity longer than plastic shims

Flexible mounting options and easy to fit in small spaces.
Energy reduction in compressed air use up to 90% and noise reductions of 10 dbA.
Maintenance free with output easily controlled, safe to use

Stainless Steel Standard Air Blade™ Air Knives

Stainless steel for corrosive and high temperature environments.  Stainless steel shim maintains gap integrity longer than plastic shims

Flexible mounting options and easy to fit in small spaces.
Energy reduction in compressed air use up to 90% and noise reductions of 10 dbA.
Maintenance free with output easily controlled, safe to use.

Aluminum Silent X-Stream™ Air Blade™ Air Knives

Built and designed for significantly longer life in difficult environments than many competing products by anodizing the aluminum body.  Stainless steel shim maintains gap integrity longer than plastic shims.

Most energy efficient design in force/unit of air consumption.
Flexible mounting options and easy to fit in small spaces.
Energy reduction in compressed air use up to 90% and noise reductions of 15 dbA.
Maintenance free with output easily controlled, safe to use.

The Nex Flow™ X-Stream™ Air Blade™ has proven to be of high quality, high performance and one of the most quiet, if not "the most quiet" designs on the market for all types of blow-off and cooling applications. Eliminating a row of drilled pipe can save up to 90% of compressed air costs

Stainless Steel Silent X-Stream Air Blade™ Air Knives

Stainless steel for corrosive and high temperature environments.  Stainless steel shim maintains gap integrity longer than plastic shims

Most energy efficient design in force/unit of air consumption.
Flexible mounting options and easy to fit in small spaces.
Energy reduction in compressed air use up to 90% and noise reductions of 15 dbA.
Maintenance free with output easily controlled, safe to use.

Hard Anodized Aluminum X-Stream™ Air Blade™ Air Knives

Built and designed for significantly longer life in difficult environments than many competing products by using a special hard coated surface over its aluminum body for mildly corrosive environments and to address any abrasive contact to the surface.

Most energy efficient design in force/unit of air consumption.
Easy to fit in small spaces.
Energy reduction in compressed air use up to 90% and noise reductions of 15 dbA.
Maintenance free with output easily controlled, safe to use.

The Nex Flow™ X-Stream™ Air Blade™ has proven to be of high quality, high performance and one of the most quiet, if not "the most quiet" designs on the market for all types of blow-off and cooling applications. Eliminating a row of drilled pipe can save up to 90% of compressed air costs

PRODUCT OVERVIEW

Nex Flow™ Air amplifiers are simple, inexpensive devices with virtually no maintenance that can convey fumes, smoke, lightweight materials and move a high volume of air for cooling, blowoff and drying applications. They use the "coanda effect" which entrains a large amount of surrounding air using only a small amount of compressed air. The effect is an amplification of up to 17 times the airflow or more (depending on the size) with reduced noise levels.

Standard (Fixed) Air Amplifiers

Zinc Die cast Standard Air Amplifiers from Nex Flow™ are solid and perform as well or better than patented designs when used in similar applications. The gap can be adjusted by adding shims, five sizes are available. The gap can be adjusted by adding shims, five sizes are available. It is easy to mount and maintain reducing both compressed air consumption and noise levels. It is quiet, can amplify flows up to 16 times their input air consumption rate.

Adjustable Air Amplifiers

The adjustable Air Amplifier is anodized aluminum or Stainless Steel for high temperature or food applications. The customer can set the gap and lock it in place using a lock ring. They are used for a variety of applications. Adjustable Air Amplifiers take energy from a small volume of compressed air to produce high velocity, high volume, low pressure output airflow. It is quiet, efficient and can amplify flows up to 17 times the input air consumption rate.

PRODUCT OVERVIEW

Nex Flow™ Nozzles are designed to fit into small spaces. We have an adjustable Nozzle for some applications and then a few different Nozzles with varying force, depending on the application. All Nex Flow Air Nozzles meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically lower with air nozzles in addition to lower energy use.
Air Nozzle Model :

Model 47001 Air Nozzles - is a small brass nozzle to fit into small spots and used by many machine builders for blow-off applications. Micro Air Nozzle - The Model 49001 Nex Flow™ brass nozzle is a Micro Air Nozzle for blowoff.

Sound level 74 dBA at 3ft (0.91mm) at 80 psig (5.6 bar).

Model 47002 Air Nozzles - is the brass nozzle added to a copper tube. Machine builders can bend the copper tube and aim the nozzles to where ever it suits. The copper tube is simply press fit into the customer's system.

Sound level 74 dBA at 3ft (0.91mm) at 80 psig (5.6 bar).

Model 47003 (anodized aluminium) Model 47003S (303/304 Stainless Steel) and Model 47003S-316L (316L Stainless Steel) Air Nozzles – This is a common standard strength nozzle with a 1/8" male NPT connection and ideal for most blow-off applications involving liquids.

Sound level 77 dBA at 3ft (0.91mm) at 80 psig (5.6 bar).

Model 47004 (anodized aluminium) Model 47004S (303/304 Stainless Steel) and Model 47004S-316L (316L Stainless Steel) Air Nozzles - This strong force nozzles with a 1/4" male NPT connection and ideal for most blow-off applications involving liquids and even light weight parts.

Sound level 78 dBA at 3ft (0.91mm) at 80 psig (5.6 bar).

Model 47009 (anodized aluminium) Model 47009S (303/304 Stainless Steel) and Model 47009S-316L (316L Stainless Steel) Air Nozzles- Is made adjustable. The superior design of the adjustable set screw is made to adjust the nozzles within its weakest and strongest ranges.

Sound level 77 dBA at 3ft (0.91mm) at 80 psig (5.6 bar).

Model 47010 - Air Nozzle - is extremely powerful. It has a 1/4" female NPT fitting and is fully anodized for long life. With the 'coanda' profile you get an extremely strong force at a distance. This is an ideal Nozzle for blow guns and for blowing small parts for part ejection heavier viscosity liquids. The 47010 is a higher force Nozzle but has less distance for laminar flow than the 47004. Use the Model 47004 is greater distance required from the Nozzle.

Sound level 78 dBA at 3ft (0.91mm) at 80 psig (5.6 bar).

Model 47011 Air Edger Flat Jet is an extremely efficient flat jet air nozzle designed to provide a powerful stream of high velocity laminar flow and high force for blow off and cooling where air knives may not be enough. Available in cast zinc and 316L stainless steel for high temperature and highly corrosive environments.

Model 47004AMF  - is the first product of the The Nex Flow™ Air Mag™ 'patent pending' star profile air amplifying nozzle and has the best force/air consumption ratio known.  Ideal when higher force required in blowoff applications.

Sound Level 74 dbA at 3 ft. (0,91m) at 80 psig (5.5 bar)

PRODUCT OVERVIEW

Manifold Systems combine the Nex Flow Air Edgers and Air Nozzles in combinations of two, four and 6 items for blow off an cooling applications where  air knives may not be applicable and where a set length of blow-off is required.   Provided with any of the air nozzles and in particular the Air Edger flat jet nozzle  to provide a more power air knife effect when regular air knives are not powerful enough.

Available in aluminum and stainless steel.

PRODUCT OVERVIEW

The Nex Flow™'s Ring Blade™ Air Wipe produces an even 360 degree blow off around the part, light in weight and compact. Easy to install and maintain and allows removal of a continuous piece. Reduces compressed air use for energy savings plus lower noise levels. Maintenance free with output easily controlled.

Designed as two pieces hinged together to open and close around the part. Instant on-off with no moving parts The 360 Degree Air Wipe System produces a "laminar" flow of air along its 360° angle using the "Coanda" effect which "entrains" a large volume of air from the surrounding area along with the small amount of compressed air from the Air Wipe System to produce an output flow up to 30 times

Available in 10 standard (inside) diameters AND in 3 versions:

1/2" - Standard Anodized Aluminum with Brass Fittings & Rubberized Plastic Hose
1/2" - X-Stream Anodized Aluminum with Brass Fittings & Stainless Steel hose for moderate temperatures up to 400 degrees F (204 degrees C)
1/2" - X-Stream 316L Stainless Steel with Stainless Steel Fittings and Hose for high temperatures up to 800 degrees F (427 degrees C) and corrosive environments
1" - Standard Anodized Aluminum with Brass Fittings & Rubberized Plastic Hose
1" - X-Stream Anodized Aluminum with Brass Fittings & Stainless Steel hose for moderate temperatures up to 400 degrees F (204 degrees C)
1" - X-Stream 316L Stainless Steel with Stainless Steel Fittings and Hose for high temperatures up to 800 degrees F (427 degrees C) and corrosive environments
2" - Standard Anodized Aluminum with Brass Fittings & Rubberized Plastic Hose
2" - X-Stream Anodized Aluminum with Brass Fittings & Stainless Steel hose for moderate temperatures up to 400 degrees F (204 degrees C)
2" - X-Stream 316L Stainless Steel with Stainless Steel Fittings and Hose for high temperatures up to 800 degrees F (427 degrees C) and corrosive environments
3" - Standard Anodized Aluminum with Brass Fittings & Rubberized Plastic Hose
3" - X-Stream Anodized Aluminum with Brass Fittings & Stainless Steel hose for moderate temperatures up to 400 degrees F (204 degrees C)
3" - X-Stream 316L Stainless Steel with Stainless Steel Fittings and Hose for high temperatures up to 800 degrees F (427 degrees C) and corrosive environments
4" - Standard Anodized Aluminum with Brass Fittings & Rubberized Plastic Hose
4" - X-Stream Anodized Aluminum with Brass Fittings & Stainless Steel hose for moderate temperatures up to 400 degrees F (204 degrees C)
4" - X-Stream 316L Stainless Steel with Stainless Steel Fittings and Hose for high temperatures up to 800 degrees F (427 degrees C) and corrosive environments
5" - Standard Anodized Aluminum with Brass Fittings & Rubberized Plastic Hose
5" - X-Stream Anodized Aluminum with Brass Fittings & Stainless Steel hose for moderate temperatures up to 400 degrees F (204 degrees C)
5" - X-Stream 316L Stainless Steel with Stainless Steel Fittings and Hose for high temperatures up to 800 degrees F (427 degrees C) and corrosive environments
6" - Standard Anodized Aluminum with Brass Fittings & Rubberized Plastic Hose
6" - X-Stream Anodized Aluminum with Brass Fittings & Stainless Steel hose for moderate temperatures up to 400 degrees F (204 degrees C)
6" - X-Stream 316L Stainless Steel with Stainless Steel Fittings and Hose for high temperatures up to 800 degrees F (427 degrees C) and corrosive environments
7" - Standard Anodized Aluminum with Brass Fittings & Rubberized Plastic Hose
7" - X-Stream Anodized Aluminum with Brass Fittings & Stainless Steel hose for moderate temperatures up to 400 degrees F (204 degrees C)
7" - X-Stream 316L Stainless Steel with Stainless Steel Fittings and Hose for high temperatures up to 800 degrees F (427 degrees C) and corrosive environments
9" - X-Stream Anodized Aluminum for moderate temperatures up to 400 degrees F (204 degrees C) - 4 inlet connections, no hose
11" - X-Stream Anodized Aluminum for moderate temperatures up to 400 degrees F (204 degrees C) - 4 inlet connections, no hose

Special diameters for the Air Wipe Blow-Off System - X-Stream™ Ring Blade™ are available on special request from Nex Flow™.

Air Wipe Blow-Off System - X-Stream™ Ring Blade™ comes with a standard .002" outlet gap which will work for 90% of all applications encountered.

If greater force is required, a second .002" (.05mm) shim may be installed to open the gap for greater flow. Materials of construction anodized aluminum or 316L stainless steel.

PRODUCT OVERVIEW

Nex Flow™ Safety Air Guns are durable, safe and comfortable to use incorporating our efficient air nozzlesand air jets to produce high output air and "laminar" flow while minimizing compressed air use and noise levels.

Nex Flow™ Carries two types of Safety Air Guns to choose from depending on an individual's personal taste and comfort. The Easy Grip Safety Air Gun or the Hand Comfort Button Gun.

All Nex Flow Safety Air Guns with Nex Flow Nozzles meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically lower in addition to lower energy use. Nex Flow™ Safety Air Guns are durable, safe and comfortable to use incorporating our efficient air nozzles to produce high output air and "laminar" flow while minimizing compressed air use and noise levels.

Nex Flow™ removes the confusion of air nozzles and air jets. You do NOT need hundreds of different nozzles. All air amplifying nozzles produce up to 25 times the compressed air consumed. Different nozzles have different outlet sizes and the more air used, the greater the force produced. Noise reduction up to 10 dBA is typical as well as reduced air consumption when compared to open jets and tubes.

By maintaining a reasonable choice of nozzles most valid applications can be addressed with our range.

PRODUCT OVERVIEW

The Frigid-X™ Adjustable Spot Cooler is a low cost and maintenance free Adjustable Spot Cooler system which utilizes a vortex tube to produce cold air at one end.

Temperature can be adjusted using a knob at the hot end to set the temperature precisely to your requirements. Temperatures range from approximately minus 30°F to room temperature and can be easily set with a thermometer.

The Adjustable Spot Cooler comes with three brass generators for flow rate adjustment - 15 SCFM (425 SLPM), 25 SCFM (708 SLPM) and 30 SCFM ( 850 SLPM) providing refrigeration up to 2100 BTU/hr (615 Watts).

All Metal Parts, Stainless Steel Body, Quiet - Under 70dBA, Tests Show Frigid-X™ Adjustable Spot Cooler is Constantly Quieter Than Competition!
Sub-zero cold air temperatures from an ordinary compressed air supply for
spot air cooler applications where adjustability is important!

Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the adjustable spot cooler.

Units are available with either a single point hose kit for small surface areas, Adjustable Spot Cooler or a dual point hose kit when heat is generated over a larger surface area.

Adjustable spot cooler can produce a wide range of airflow and temperature by adjusting the knob at the hot end and changing the various generators supplied.

The generators control the air consumption and are easily interchangeable.

Our Adjustable spot cooler has a 25 SCFM (708 SLPM) generator installed that will produce up to 1,800 Btu/hr. of cooling. If less is required, the 15 SCFM (425 SLPM) generator can deliver 1,100 Btu/hr.

If more cooling is needed Nex Flow™ can supply you with the 30 SCFM ( 850 SLPM) generator for up to 2,100 Btu/hr. of cooling.

PRODUCT OVERVIEW

The Frigid-X series Cabinet Enclosure Cooler for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.

Our Cabinet Enclosure Coolers are compact and can be installed in minutes through a standard electrical knockout.

Nex Flow™ Offers  4 Types of UL Listed NEMA Rated Electrical Panel Coolers:

Frigid-X Cabinet Panel Coolers NEMA Type 12 (IP-52) For Electronic Control Panels for General use in industrial environments where no direct liquid spray is applied to the unit. Stainless steel construction to hold up in corrosive environments.

Frigid-X Cabinet Panel Coolers NEMA Type 3R (IP-14) For Electronic Control Panels for Outdoor Use. Stainless steel to hold up to rain, snow, humidity and general outdoor use.

Frigid-X Panel Coolers NEMA Type 4-4X (IP-66) For Electronic Control Panels - splash resistant, for use in washdown environments as well as outdoor use. Unique patented design * for secure water tight protection. Stainless steel for food service and corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use.

Frigid-X Panel Coolers NEMA Type 4-4X-316L (IP-66)  The Patented* NEMA TYPE 4-4X-316L (IP 66) Frigid-X™ Panel Cooler are constructed of 316L Stainless Steel. Dust, oil-tight,spray resistant and used in environments where there are liquids and for food service and corrosive environments.

* US patent number 8,616,010 / Other  countries: Patented or Patent Pending

Note: Always question non-approved units used on electrical enclosures to assure that your panels are not damaged by inferior products.

Nex Flow™ offers a High Temperature Warning Sticker free with every Frigid-X Panel Cooler  purchased for the air conditioning of electrical and electronic control panels.  High temperature inside a control panel can be damaging to internal equipment and lead to unplanned shutdown of factory operations.  The label provides for an effective  warning with a color change indicator to ORANGE and a danger warning with  a color change indicator to RED.  Color change is reversible so when the temperature problem is corrected, the label can continue to be used indefinitely.  While it is a qualitative measurement only, it provides an ideal cautionary monitoring of possible temperature problems within a control panel.

PRODUCT OVERVIEW

The Silent X-Stream™ Frigid-X™ Panel Cooler series for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Utilizing a hot and cold end muffling kit the unit is made extra quiet to under 64 dBA depending on capacity. The hot end muffler also acts a "heat guard" - you can actually wrap your hand around it without feeling much heat. The hot air is exhausted safely underneath the hot end muffler.

The  Silent X-Stream™ Frigid-X™ Panel Cooler series are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.

* US patent number 8,616,010 / Other  countries: Patented or Patent Pending

Note: Always question non-approved units used on electrical enclosures to assure that your panels are not damaged by inferior products.

PRODUCT OVERVIEW

The Mini Spot Cooler is a low cost and maintenance free system which utilizes a vortex tube to produce cold air at one end. It is quiet and compact.

Designed for small parts, the Frigid-X™ Mini Spot Cooler produces a stream of 15 to 20 degree F (minus 9.5 to 7 degree C) of cold air to prevent heat buildup depending in inlet air temperature. It can improve tolerances in machining of small critical parts and increase production rates.

Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the mini spot cooler.

PRODUCT OVERVIEW

When lubrication is required as well as cooling, lubricating mist can be reduced and cooling enhanced.
Heavy coolant can be messy, costly and must be carefully maintained. Dry machining is not always possible due to the need for lubrication or additional cooling that cold air alone cannot provide.

The unique patent pending low cost Frigid-X Sub-Zero Vortex Tool Cooling Mist System is ideal for these applications. The unit is comprised of a coolant/lubrication suction system which draws any water based liquid into a specially designed delivery system. This cools the liquid to deliver a very cold fluid "mist" at around 40 degrees F (5 degrees C). This cooling allows for as much as 20% less coolant needed, faster production rates and improved quality. An Adjusting screw controls the amount of mist required. Simple operation, no moving parts except for the adjusting screw means long life, low cost operation and zero maintenance.

PRODUCT OVERVIEW

All Metal Parts, Stainless Steel Body, Quiet - Under 70dBA, Tests Show Frigid-X Constantly Quieter Than Competition!

Frigid-X™ Tool Cooling System for dry machining applications - replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.

It is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes but increasing matchining rates and extending tool life.

Produces cold air at approximately 50° F (28° C) below supply air temperature. The unit is muffled for quiet operation. No moving parts assures long life, maintenance free operation while extending tool life and improving production rates.

Can often replace costly mist coolants and certainly improves the quality and output of all types of dry machining operations from metals to plastics. Unit is low cost, no electricity with no moving parts and is essentially maintenance free.

PRODUCT OVERVIEW

The Nex Flow™ Stainless Steel vortex tube uses a brass generator as a standard item rather than cheap plastic for longer lifespan and for applications in high temperature environments. With virtually no moving parts, the  vortex tube takes compressed air and converts it to cold air at one end and hot air at the other.

Temperature as low as minus 50° F (minus 46° C) can be achieved at the cold end and up to 260° F (127° C) at the hot end.

Nex Flow Vortex tubes are available in three basic sizes and in several packaged versions.

Frigid-X™ Adjustable Spot Cooler

The Frigid-X™ Adjustable Spot Cooler is a low cost and maintenance free Adjustable Spot Cooler system which utilizes a vortex tube to produce cold air at one end.

Frigid-X™ Mini Spot Cooler

The Nex Flow™ Mini Spot Cooler is designed for small parts and produces a stream of 15 to 20 degree F (minus 9.5 to 7 degree C) of cold air to prevent heat buildup depending on inlet air temperature.

Frigid-X™ Box Cooler

For cooling small enclosures for laboratory use, environmental chambers and any application where an enclosure needs cooling

PRODUCT OVERVIEW

Blow dirt, chip and debris out of deep blind holes in one easy step. Can clean holes up to 1 inch diameter and 20 inches deep.! Blow guns alone can create potentially hazardous flying debris. All the debris is contained within the unit and passed into a reusable collection bag, protecting the operator.

The Blind Hole Cleaning System consists of a Blind Hole Gun assembly, an adaptor for the diameter of the hole and the nozzle for the particular depth range of hole. The Blind Hole Cleaning Kit includes all hole diameter adaptors, all nozzles as well as a water removal filter with auto drain.

PRODUCT OVERVIEW

The Model 40002FMS STREAM VAC™ is a versatile and affordable compact air cleaning system is ideal for the removal of fumes, dust and other air pollution from work stations without the need for heavy and bulky machinery. The Nex Flow™ Stream Vac™ is an in line air conveyor that when hooked up to a 2" hose up to 25 feet (8 meters) and connected to a compressed air line, it will remove up to several hundred cubic feet of air while using only a minimal amount of compressed air, taking with it welding fumes, soldering fumes, particulate from local grinding operations, smoke and particulate from almost any "spot" application.

PRODUCT OVERVIEW

Manufactured in 316L Stainless Steel: The Reversible Drum Angel/ Drum Pump is a maintenance free system to recover spilled liquids, coolant, sludge, tramp oil, wastewater and other liquids using only compressed air. The compressed air system attaches easily to any closed head of a drum (30 or 55 US gallon, or 45 Imperial gallon or 205 litre drum) The reversible feature allows you to fill or empty the drum in under two minutes with the simple turn of a knob. Using no electricity, these system last and last, unlike many electrical units that wear out quickly in harsh industrial.

PRODUCT OVERVIEW

The Nex Flow Ring Vac Air Conveyor is available in both ANODIZED Aluminum, Heavy Duty HARD Anodized or ALL STAINLESS STEEL. Simply clamp a standard hose size to each end of the Ring-Vac™ to create this high energy conveying system. No moving parts for maintenance free operation with capacity and flow controlled with a pressure regulator.

Known as Hopper Loaders or Venturi Loaders, originally designed to eliminate manual bending and lifting. Conveying rate depends on density of material ( Lbs / cubic foot ), horizontal run, vertical lift. These vacuum conveyors provide a simple, low cost solution compared to other pneumatic conveying systems

STANDARD ALUMINUM / STAINLESS STEEL RING VAC™

Available in standard and threaded versions for regular and high temperature applications on both 303/304 Stainless Steel or 316L Stainless Steel.
Pneumatic Conveyors - Ring-Vac™ Pneumatic Conveying System has virtually no moving parts, conveys material at high rates and over long distances. It utilizes compressed air for a powerful, efficient venturi action along its length in a compact design for high capacity conveying over large distances.

Heavy Duty X-STREAM Ring Vac™

X-Stream™ Air Conveyors - Ring-Vac™ Heavy Duty Pneumatic Conveying System: Available in standard and threaded versions for heavy duty applications. Designed for conveying materials over a longer distance both vertically and horizontally. Made of hardened anodized aluminum it helps prevent premature wear that could occur either an ordinary anodized aluminum or Stainless Steel Ring-Vac™.

Supreme X-Stream™ Non-clogging Pneumatic Conveyor

The X-stream™ Supreme Pneumatic Conveying System (XSPC) has virtually no moving parts, conveys material at high rates and over long distances. Intrinsic straight through design prevents clogging. It utilizes compressed air for a powerful, efficient venturi action along its length in a compact design for high capacity conveying over large distances.

PRODUCT OVERVIEW

The X-Stream Hand Vac is the low cost solution to a variety of industrial housekeeping applications. It is a blow gun, a vacuum gun, a collection system and a transfer system in one simple package. The X-Stream Hand Vac is lightweight die cast aluminum and uses less air than a normal blow gun. It draws a vacuum at one end to produce a high vacuum for collection or transfer of materials. It is easily converted from a blow gun into a vacuum gun and back again. It can also be used to transfer material over a long distance using a vacuum hose which can be supplied. In vacuum mode, it can be used to vacuum up debris if more appropriate than blowing air, and debris can be collected in an available reusable vacuum bag.

Three systems are available

Model 36011 - Collection System consists of X-Stream Hand Vac plus reusable collection bag, cleaning brush, crevice tool, skimmer tool, two extension wands, and stainless steel hose clamp.

Model 36012 - Transfer System consists of X-Stream Hand Vac plus 10 foot (3 m) vacuum hose with cuffs at both ends, cleaning brush, crevice tool, skimmer tool, two extension wands, and stainless steel hose clamp.

Model 36013 - All Purpose System consists of X-Stream Hand Vac plus 10 foot  (3 m) vacuum hose with cuffs at both ends, reusable collection bag, cleaning brush, crevice tool, skimmer tool, two extension wands, and stainless steel hose clamp.

PRODUCT OVERVIEW

Where air is required to affect static removal at a distance and compressed air is not available, the Haug Ion Blower can be used with either the standard Model RN static bar or the extra powerful Model VS bar. These units are easy to mount and simple to operate with an adjustable fan. The bar is located outside the blower for easy maintenance and cleaning. Three different sizes are available – small, medium and large lengths.

NOTE: If strong blow-off force is required and compressed air cannot be utilized, Nex Flow Air Products Corp. partners with companies that can supply regenerative blower systems.

Special Notes: Haug static bars all come with a patented connector to assure safety in operation and maintenance. Field repairable, it prevents a connection if the static bar is removed or attached while power is still on at the power supply.

Cable is FULLY SHIELDED unlike some manufacturers which claim shielding which may only be partial. This results in much longer life for Haug products.

REPAIRABLE POWER SUPPLIES – almost unheard of in the industry, Haug power supplies are repairable and come with a 2 year warranty.

PRODUCT OVERVIEW

A Low Cost but powerful static eliminator that rapidly removes static charge and cleans.
The Standard Air Blade™ Ionizer combines the superior designed Standard Air Blade™ Air Knife the quality Haug static bars – the RN bar for most applications or the extra strong VS bars (Triple X versions) for very high static charges and extremely high speeds. The standard Air-Blade™ Air Knife uses slightly more compressed air than the Silent X-Stream™ Air Blade™ and has a higher sound level but still produces a powerful, and adjustable force with "laminar" flow to eliminate charges in applications where static bars cannot reach or where high speeds are a factor.

STANDARD AIR-BLADE™ IONIZER

The Standard Air-Blade™ Ionizer combines the superior designedStandard Air-Blade™ Air Knife with a quality static bar made by Haug, a world leading static control manufacturer. Charges can be eliminated quickly, even over large distances and surface area.

SILENT X-STREAM™ AIR-BLADE™ IONIZER

The Silent X-Stream™ Air-Blade™ air knife provides increased efficiency and very low noise levels compared to the Standard Air Blade™ air knife. Both units utilize the quality Haug static bars – the RN bar for most applications or the extra strong VS bars (Triple X versions) for very haigh static charges and extremely high speeds.

PRODUCT OVERVIEW

The Ring Ionizer – Ionizing Nozzles are a highly effective the discharging and cleaning of surfaces – in particular of non-conductive
materials. The Nozzles can also be mounted to a handgun if they need to be converted to manual use.

Ring Ionizer Model 17200 and Model 17203 (with Air Gun) This "mini"

version is particularly suited for the discharge of very small areas and components in confined work spaces. It is light, flexible and easy to handle, and its robust design makes this unit the Ionizer of choice for many discharge processes.

Ring Ionizer Model 17195 and Model 17196 (with Air Gun)

This ring Ionizer is light, robust and easy to handle with ergonometric design when used with an Air Gun.

Ring Ionizer Model 17194 and Model 17187 (with Air Gun)

The largest Nozzle, very heavy duty and robust for larger area applications.

PRODUCT OVERVIEW

Ionizing Air Gun Model LG

The LG "Light-weight Gun" ionizing air gun

The HAUG LG ionizing air gun is light weight and easy to handle with its service-friendly handling, is a peerless innovation in the field of elimination of dust and charges. Heavy-duty users and others will appreciate its lightweight at only 480 grams (before air hose and HV cable).

Ionizing Air Gun Function

This product is based on the neutralization of "spot charges" by means of bipolar ions.

The head of the device is enclosed by a sheet material shield, which serves both as mechanical protection and counter-electrode. Due to the special shape of this shield, bypass channels are created, which assist an efficient six-chanel blowing nozzle by stabilizing the airflow. The airflow can be adjusted exactly in accordance to the application – particularly useful for the treatment of small pieces. A power pack provides the required voltage.

PRODUCT OVERVIEW

The One-Point-Ionizer OPI was developed for the neutralization of the smallest of parts. Emitting positive and negative ions, this unit reliably neutralizes spot charges.

This ionizer is perfectly suited for mounting in places where there is little room. The plug of the electrode must simply be connected to the high voltage transformer (power pack) and the unit can be quickly set into operation without tools.

The One-Point-Ionizer OPI has proven its value repeatedly in daily use, e.g. in the medical industry. The OPIcan also be equipped with compressed air (Mini-Jet Ionizer).

NOTE: The pin carries high voltage and must not be touched while in operation.

PRODUCT OVERVIEW

The Nex Flow™ Ion Blaster Beam™ neutralizes static electricity and can remove static free dust up to 15 feet (4.6 m) away with no moving parts. It's compact design allows it to be used in hard to reach areas or confined spaces. The air volume and velocity are infinitely adjustable over a wide range using a pressure regulator to address any application from light to heavy duty. The use of an "air amplifier" (Model AM40) maximizes ionized airflow with large volume entrained while minimizing the use of compressed air.

In most applications only 10 psig (0.7 bar) is required to operate effectively. The Ionizing Point is a powerful ionizer which remains effective because the air exit "plastic PET head" of the unit prevents weakening if ions which metal attachments may do. This can make the Ion Blaster Beam™ far more effective than systems using metal.NN

PRODUCT OVERVIEW

Nex Flow™ uses quality Power Supplies from Haug that have several unique features unavailable in competitive units.

HAUG POWER SUPPLIES ARE

1. Repairable - parts are replaceable

2. Several versions - units available with four outlets, two outlets, with or without function monitoring, and in 220V and 110V versions

3. Patent Safety X-2000 Connection - prevents accidental shocks when connecting or disconnecting a static eliminator to the power supply

4. High Reliability and Life - so reliable that we even offer a two year warranty on the power supplies

HIGH VOLTAGE POWER PACK TRANSFORMERS EN - C (2 OUTLET) AND EN-C4 (4 OUTLET)

Static Control Power Supply EN-C type High Voltage Power Pack. The integrated high-voltage transformer coverts applied mains voltage to approx. 7,000 to 8,000 volts. The unit is equipped with two or four high-voltage terminals and integrated on - off pilot lamp. Transformers are equipped with a modular-type highvoltage transformer. It consists of three main modules, all of which can be replaced individually. This unit is electrically approved for North American installations.

S-LINE POWER PACK EN SL

The S-Line power pack comes with two high-voltage connections and meets both North American and European standards. The integrated high-voltage transformer coverts applied mains voltage to approx. 7,000 to 8,000 volts. Integrated on - off pilot lamp. S-Line power pack EN SL LC - Same as the SL, but with integrated full-electronic function monitoring to constantly monitor all functions of the ionizing system. It alerts the operator of any irregularities by causing the LED indicator integrated in the housing to flash EN SL RLC - Identical in all technical aspects to the EN SL LC plus a signal socket above the earthing sleeve. A fault message can be connected to the signal socket.

MULTISTAT POWER SUPPLY

The Multistat power pack provides the optimum in power pack performance and monitoring. The Multistat EX is approved for explosion proof applications (but must be mounted outside the explosion proof area).

EN - 92 EX POWER SUPPLY

Power pack EN 92 Ex is suitable for direct use in areas with potentially explosive atmospheres (zones 1 or 2).

The units comply with the International ATEX directives. All high-voltage components are accommodated in a flameproof housing. The power pack EN 92 Ex is equipped with two highvoltage ports for the connection of the ionizing units. No long high-voltage cables are required, as the power pack can be installed in the immediate vicinity of the ionizing unit.

PRODUCT OVERVIEW

HAUG RN Static Bar

The HAUG RN ionizing bars is a powerful and rugged piece of equipment. Its construction satisfies all technical requirements and it has proven its value repeatedly in the removal of electrostatic charges during roll, sheet and web (continuous product) processing. Production interfering surface charges can be removed reliably and effectively, even at high operating speeds.

The coaxial high-voltage plug-and-socket connection of the HAUG system X-2000 offers a unique advantage in that the gastight high-voltage plug can be connected to the HAUG power pack easily and without tools. The flexible, coaxially shielded cable connects the ionizing unit with the voltage supply.

The round construction of the RN ionizing bars permits the exact axial adjustment in the direction of travel of the material. The ionizing bars is safe to touch. Special wear-resistant electrodes guarantee long service life.

HAUG VS Static Bar

The HAUG VS ionizing bar reliably removes electrostatic charges and its performance, when compared to the standard version, is three times the power. This tremendously improves the static removal and designed to address extremely high charges, faster speeds and greater distances.

The VS ionizing bar has all of the typical features that characterize HAUG ionizing bars: the reliable and removable plug-and-socket connection System X-2000, the shielded high-voltage cable, the special stainless-steel electrodes and the convenience of being safe to touch.

The electrical capacity of the VS ionizing bar is three times as great as the standard version, and therefore, it is necessary to base any power pack load calculations on a bar length three times as long.

Example:

VS static bar - 50 cm with 200 cm cable
Power pack load: 3 x 50 cm + 200 cm = 350 cm

Explosion Proof Static Bars

Units for areas with potentially explosive atmospheres (ex zone)

For many years, HAUG has been a competent manufacturer of ionizing units approved for equipment in areas with potentially explosive atmospheres. These are intended to eliminate unwanted electrostatic charges in areas where hazardous gases may form, such as paint plants or printing machines.

Industries

Graphical industry: Screen, tampon and offset printing machines etc.
Paint shops: automotive paint applications, painting of plastic parts, etc.

Ionizing bars EI Ex T

The design of the ionizing bars EI Ex T complies with the International ATEX directivities. In combination with the power pack EN 92 Ex or Multistat Ex, it is suitable for use in manufacturing locations with potentially explosive atmospheres resulting from gases of explosion group IIA, temperature classes T4 to T6.

Further bars variations are available

These static bars can also be provided with high-voltage connection at the end of the bars for series connection of ionizing units (daisy-chain units end to end) or without HV-cable, suitable for connection of a flexible, separate high-voltage cable with elbows or tees – a variety of systems to "minimize" the need for excessive cable and extra power supplies, a significant advantage over competitive systems such as in "halo" blow-offs for paint lines where several static bars with air blades can be connected end to end.

Recommendation

HAUG ionizing bars are used with machines in the packaging, film, printing and textile industries, as well as many other industrial applications. It is recommended that two ionizing bars be installed above and below the material web.
The RN ionizing bars is suitable for feed speeds = 100 m/min.

PRODUCT OVERVIEW

The Static Meter electrofield meter is a small hand-held field strength meter with digital display for measuring electrostatic charges in Volt. It perfectly combines easy operation with accurate measuring technique.

The Static Meter measures charges according to the field influence principle C: The influenced charges, caused by the electrical field, generate an alternating current proportional to the electrical field strength. The selective amplifier converts this value into the corresponding field strength or electrical potential - without withdrawing energy from the electric field over the averaged time.

Multicheck Model 80301

Multicheck Model 80301 - Tests if static bars and power supplies are working. The high-voltage test unit Multicheck is a performance testing unit for any power supply and for HAUG ionization units. Unlike cheap AC Testers which only show if power is going into power supplies or static bars, the Multicheck actually indicates if a power supply or bar is working. As you get close to the static bar, or power supply, a red light goeson indicating power to the unit, then if there is adequate voltage to make the system work,the light goes green.

A minimum voltage of 3600 volts is required to insure that a static elimination system is working. The Multicheck light will turn green if you have that voltage. AC Testers will NOT do this and are not an adequate indicator so be wary of marketing ploys which may offer AC testers as an accurate device for testing power supplies or static bars.

For testing power packs, the red measuring probe is inserted into the high-voltage socket as far as it will go. After pressing the red push button the LED will illuminate green if the unit functions correctly. In case of malfunction, the LED will illuminate in red or no display at all is visible

Haug Hand Held Static Meter Model 80302

Hand Held Static Meter Model 80302 - used to indicate static charge on parts, sheets and webs. The Hand Held "Static Control" meter is reasonably priced and easy to handle. It is operated using an ON/OFF soft key (with circuit-breaker) and two further soft keys for the 0-100 and 0-1000 kV/m measuring ranges. The meter is battery powered. It should be part of any basic equipment of every electrical engineering workshop. It is rugged and durable for use in all types of plants operations.

Haug Hand Held Static 1 Digital Static Meter

Hand Held Static 1 Digital Static Meter Model 80303 - The Static 1 is a small hand-held field strength meter with digital display for measuring electrostatic charges in Volts and is used if more accurate readings are required than with the standard hand held meter. In order to obtain optimum results, the distance between test object and sensor head - depending on the degree of charge and the condition of the objects' surface - can be selected incrementally. The device is equipped with a Hold function to keep the measured value stored on the display. The integrated micro-computer automatically converts the measured field
strength into the equivalent charge in Volt

PRODUCT OVERVIEW

Cabinet Panel Cooler Accessories are available with a standard two-way normally closed solenoid valve and thermostat kit Model 90015 (120V) or Model 90016 (240V). This limits the flow of air only when required. The thermostat is factory set at 95°F (35°C) and will normally hold +/- 2°F (1°C) inside the enclosure. It is rated 24V-240V, 50/60Hz. Ul recognized and CSA approved.

Thermostat And Solenoid Valve Kit

This kit comes complete with a solenoid valve, thermostat, and a resistor. The resistor is included should you encounter rapid temperature fluctuations in the control panel causing the solenoid to cycle on and off to quickly (chattering). The resistor is installed (if needed) across the leads of the thermostat and prevents chattering by dampening the thermo switch sensitivity.

PRODUCT OVERVIEW

Electronic Thermostat ELC (Electronic Control Digital Thermostat) is a way for precise control of one or two Nex Flow™ Frigid-X™ panel coolers.

Supply Voltage: AC120-240V (24V on request)

Sampling Rate: 4/sec (almost double that of nearest competitor)
Accuracy: 0.25% of full-scale
50° to 100°C measuring range
NEMA 4-4X Enclosure (ABS/PC), ULC approved – it is accepted anywhere in the world – Lexan door: U94-V-0
Standard unit comes with one solenoid valve
°F or °C and easily switchable back and forth.
3 Outputs: Two relay outputs and one with PID, 1SSR output with PID to control external SSR
It has two Alarm settings for the two output relays so you can set two different temperatures to control two different solenoids for two separate coolers (and can be used to control anything electrical)
AutoTune Mode for quick set ups

Standard unit comes with one solenoid valve, but it can operate two units and also complete additional tasks

PRODUCT OVERVIEW

PRODUCT OVERVIEW

The unique Nex Flow RIGID FLEX Hose is an all stainless steel hose that does not break after a few bends like competitive rubber hoses with simple copper inserts. It is resistant to creep and crimping. Its all stainless construction allows is use in any difficult environment.

The Nex Flow RIGID FLEX Hose is used to flex, direct and then hold in place air nozzles, air jets and other small blow off products TM TM such as our Model 40001 adjustable air amplifier and 3" X-Stream Air Blade Air Knife. The RIGID FLEX Hose can also be used with liquid spray jets.

The rigid flex hose is available in three different sizes 6" (152 mm), 12" (304 mm) and 18"(457 mm) and in two configurations – 1/4? male NPT welded end connection both ends or 1/4" male NPT welded connection one end and female NPT welded connection other end.

PRODUCT OVERVIEW

High Temperature Warning Sticker provides a qualitative monitoring of the temperature inside of electrical and electronic control panels.  High temperature inside a control panel can be damaging to internal equipment and lead to unplanned shutdown of factory operations.  The label provides for an effective  warning with a color change indicator to ORANGE and a danger warning with  a color change indicator to RED.  Color change is reversible so when the temperature problem is corrected, the label can continue to be used indefinitely.  While it is a qualitative measurement only, it provides an ideal cautionary monitoring of possible temperature problems within a control panel.

PRODUCT OVERVIEW

NEX FLOW MOUNTING SYSTEM FOR AIR BLADE AIR KNIVES & AMPLIFIERS – Flexible and Durable

Mounting Systems for air knives and amplifiers provide a convenient and flexible way to utilize the products for blow-off and cooling applications. All Mounting Systems are made of powder coated steel. One knob controls the infinite flexibility of the system and secures it in place after the air knife or amplifier is properly positioned. Optional magnetic base can secure it to a magnet accepting platform. Rugged and secure positioning.

Secure air knives in place quickly and easily with precision mounting.

Air Blade Air Knife System comes complete with powder coated brackets and stainless steel mounting screws along with the mounting unit itself. Optional magnetic base, otherwise can secure by threading to a surface.

Air Amplifiers can also be securely and accurately placed using the mounting systems.

Standard Model AM10, AM20, and AM40 as well as adjustable Model 40001, and 40002 Air Amplifiers can also be mounted using the mounting arm. TM As with the Air Blade Air Knife System an optional magnetic base can be provided or the unit can be secured by threading to a surface.

PRODUCT OVERVIEW

Magnetic Base is used where the air operated product is required to be frequently moved. The extra strong Magnet allows for flexible Mounting, whether vertical or horizontal. Optional mini shut-off valve can be supplied.

PRODUCT OVERVIEW

The Flex.US Ultrasonic Leak Detector is a hand held, high quality compressed air leak detection system that has all the features necessary for flexible use in finding costly air leaks.

The FLEX.US ultrasonic leak detector kit comes with the FLEX.US unit, carrying case, and manual and utilizestwo AA alkaline batteries(included). The FLEX.US is a complete kit – the high quality flexible sensor is mounted on the end of a flexible steel pipe so the ultrasonic sound can access hard to reach areas. The unit converts the ultrasonic noise of a leak into a sound humans can hear (hissing sound) and not just some beeping sound or LED display that may not distinguish a leak sound fromother phenomenon.

The headset has excellent noise attenuation for use in the noisiest of environments.

A rugged carrying case protects your FLEX.US when not in use.

The FLEX.US is a solid tool – built to last, it is easy to use and will providemany years of service.

The Flex.US Ultrasonic Leak Detector has the sensor on the end of a flexible pipe to allow detection of leaks in difficultto reachareas.

The Ultrasonic Leak Detector comes in a handy carrying case to store the unit and quality headphones. The headphones are durable and of high quality to cut out extraneous noise that would make it difficult to detect leaks.

Quality head phones block out plant noise to make it easy to listen for, and locate an air leak with the Flex.US system.