EPDM or Ethylene Propylene Diene Monomer has an excelent operating teperature range of (-45)°C to 120°C. It is highly recommended for out-door uses as it is resistant to oxidation, UV Rays and Ozone. However, EPDM does not have good oil resistance. It is resistant to many chemicals and solvents and shows a good resistance to many corrosive chemicals. It is also used for roofing sheets and weather strips.

Nitrile rubber is a co-polymer of butadiene. It has good general resistance to oil along with good mechanical properties, especially tensile strength, flexibility, compression set and impermeability to gases. It has moderate aging properties and good adhesion to metal. Its recommended operating temperature is -30* C to + 120* C . It also displays a good resistance to chlorine. It gives satisfactory resistance to general hydrocarbons.

Neoprene or Chloroprene rubber has excellent mechanical and good abrasion properties; it has a good resilience against heat, ozone and weathering and also gives good adhesion to metal. The recommended operating temperature range is between (-40)°C to 125°C. We also offer flame retardant grades.
• Width available : 1.2 Mtrs / 1.4 Mtrs / 1.5 Mtrs up to max 2 Mtrs.
• Length : From 10 Mtrs Rolls up to 25 Mtrs rolls.
• Thickness : 0.5 mm Thk to 50 mm Thk.
Further customization in polymer and sizes available.

NR or Natural Rubber is derived from latex liquid extracted from rubber trees. This rubber has excellent mechanical properties, low compression set and high resilience. It also has excellent dynamic and rebound properties. The operating temperature is from (-30)°C to 70°C. It is available in varied range of hardness's from 30° to 85° Shore A. It also has good resistance to acids, alkali and salt. It is not recommended for use in areas where it could come in contact with oils and hydrocarbons. They are special purpose high abrasion resistant rubber, made from premium quality Natural Rubber with outstanding resistance to cut, tear and abrasion used for anti- abrasion rubber lining also for material handling in mining. 
Applications: Used as skirt-board sheets, bearing pads, shot blasting sheets, high tensile applications and commercial usage with & without insertion.
• Width available : 1.2 Mtrs / 1.4 Mtrs / 1.5 Mtrs up to max 2 Mtrs.
• Length : From 10 Mtrs Rolls up to 25 Mtrs rolls.
• Thickness : 0.5 mm Thk to 50 mm Thk.
Further customization in polymer and sizes available.

Butyl Rubber has a very low permeability to air and other gases. It has excellent resistance to ozone, oxidation and sunlight, with an excellent temperature range of (-45)°C to 120°C. Butyl has a very low resilience, which makes it ideal for vibration damping and shock absorption applications but offer a moderate resistance to abrasion and compression set. With careful compounding, Butyl compound can be made to acquire good tensile strength. It is resistant to most mineral acids and alkaline. We do not recommend its use in application where resistance to oil and Hydrocarbon is required. We can offer halogenated Butyl Rubber Sheets for specified applications.

Silicone Rubber is a perfect choice for Medical, Pharmaceutical and Food processing industries. Silicone has comparatively low mechanical properties, tensile strength, elongation and tear strength, however they keep constant even at high temperatures but should not be used for high temperature steam. Its resistance to oil and hydrocarbon is fairly limited and similar to that of chloroprene rubbers. Reasonable resistance to a whole range of general chemicals but acids, alkalis, esters and kerosene should be avoided. Silicone has excellent resistance to heat up to 220°C intermittent. It remains flexible at low temperature of (-50)°C and it is also resistant to UV light, Ozone and Weathering. Exhibits low inflammability and low smoke toxicity. It has good electrical insulation properties.
• Width available : 1.2 Mtrs / 1.4 Mtrs / 1.5 Mtrs up to max 2 Mtrs.
• Length : From 10 Mtrs Rolls up to 25 Mtrs rolls.
• Thickness : 0.5 mm Thk to 50 mm Thk.
Further customization in polymer and sizes available.

These sheets are manufactured of premium natural grade rubber for abrasion, impact and corrosion resistance. These sheets provide unmatched wear performance in the toughest abrasion environment.

Fluoro Elastomer rubber or Viton has high resistance to heat with a temperature range of (-40)°C to 250°C. It also possesses a good flame resistance and is usually self-extinguishing. Viton or FKM have excellent resistance to oxygen, ozone and natural weathering and also have outstanding resistance to compression, especially at elevated temperature. Its resistance to most solvents and chemicals give long service life as it has excellent resistance against hydrocarbons, aliphatic, aromatic and chlorinated chemicals and resistance to acids and alkali including oxidants.
• Width available : 1.2 Mtrs / 1.4 Mtrs / 1.5 Mtrs up to max 2 Mtrs.
• Length : From 10 Mtrs Rolls up to 25 Mtrs rolls.
• Thickness : 0.5 mm Thk to 50 mm Thk.
Further customization in polymer and sizes available.

Kiran™ Insulating Rubber Mats are especially designed to be used in front of switchboards and high voltage equipment. These long life mats are designed to protect operators from electrical shocks thus acting as personal protection equipment. We offer a range of insulating mats for almost any application. 
Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. Kiran™ Safety Mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like High Voltage Panels, Sub-station, Power Transformer Rooms, LT & HT Labs, Near Bus bars, Near Control Panels, Anti-Skid / Flooring etc.

These mats are primarily used in stables to ensure the horses or cows
live in a totally clean, sterile and smell free environment made from high
quality natural rubber, these mats are designed to be soft, dry, smell &
dust free. All the materials are tested for tensile strength, Elongation at
break, and tear resistance. Our product ensures that all the solid and wet
material can be removed quickly and easily. Our rubber mats are soft and
warm which ensures minimum risk to animals, it provides a comfortable
bed at the bottom.

Gym mats add comfort, safety, and appeal to exercise areas. Our gym
mats include single rubber mats for isolated areas such as weight lifting
mats and exercise machine mats, or rubber mat rolls covering larger
areas, or even interlocking rubber mats going wall-to-wall. Whatever the
particular need may be, we have the gym mat solution.

Protect your child from injuries by installing one of our rubberized
floorings available at reasonable prices. Assuring durability and high
skid resistance, these floorings are ideal for children play areas and
parks. Clients can lay down these rubber floorings on different kinds of
surfaces, including sand, soil, wood and tarmac. To meet the variegated
requirements of the clients, we offer these floorings in various colors,
patterns and designs.

Rubber mats and rubber rolls for home and commercial installations
designed for quality and value. Rubber flooring is a good fit for durability
factory of rubber and to provide cushion on floors for home and
commercial applications. Much of our black rubber sheets and rubber
rolls are made with recycled rubber content, which is great for the
environment, while full color rubber is manufactured from virgin or
synthetic material.

Our product O-rings are featured as ready to fit sealing element for leak proof sealing in:

Mechanical Engineering Instruments
Construction
Domestic Appliances
Automotive Industry

“O” Rings are made from a wide range of Elastomers and offered in a huge variety of inner diameters and wall thickness.

We also specialize in rubberizing metal rollers used for: 

Mechanical Engineering
Mining
Metallurgical Industry
Textile Machinery
Xerox Machines
Printing Press

These metal rollers products are available in sizes of 25 mm to 600 mm dia. 12 Inches to 2.5 Mtrs long shafts can be rubberized for customizing this product as per the requirement.

Expansion joints are often included in industrial piping systems to
accommodate movement due to thermal and mechanical changes in the
system. Expansion joints are designed to accommodate certain
movements while minimizing the transfer of forces to sensitive
components in the system. Manufactured with precision the Kiran™
way, guarantees the desired flexibility, ultra high performance and
safety.
Features
• Manufactured sizes up to 3000 mm Diameter
• Test pressure up to 35 BAR
•  Manufactured in single or multiple arches.
• Galvanized carbon steel, stainless steel and other accessories
also supplied.
• 1 year replacement guarantee on every expansion joint.
Application
• Absorption of vibrations in pipes, caused by changes to temperature,
etc. Also in pumps, deposits, machines, engines, etc.
• Noise reduction in circuits of fluids.
• Absorption of all types of movements, such as axial compression, axial
elongation, lateral and angular deviations etc.
•  Provide a tight seal against pipe flanges.
• Connection of pipes, which are not properly lined up.
• Water-hammer reduction.
Apart from the regular ANSI B16.5 ASA 150#, PN10, PN16 etc, we even
customize our expansion joints to fit your odd sized pipes.
Fill up our Expansion Joint inquiry form now to tell us about your
requirement so we can advice which style suits you the best.

We manufacture Fabric Expansion Joints made up of various rubberized
fabrics to perform better and give maximum performance against heat,
cold or ambient environment. Kiran™ expansion Joints are normally
compatible with most of the applications ranging from different
temperatures, media and operating conditions with very minimal
adjustments to suit the functionality of the Industry.
We specialize in manufacturing customized solutions as per the
customer's requirement depending on the Size, Shape, Temperature&
Pressure. Kiran™ offers preassembled units for your new projects or
your repair works, this is the best solution for a quick on-site installation.
All the raw material used in the manufacturing of Expansion Joints are
quality tested and recommended by our technical team based on their
extensive research and knowledge of manufacturing expansion joints.
The material composition to manufacture the Expansion Joints is
carefully analyzed on the basis of application, medium, pressure &
temperature.
Applications:
Oil Tanks • Cement Plants • Petro Chemical Refineries • Steel Plants
• Boiler Plants • Thermal Power Stations • HVAC Units • Water Supply
Pipes • Industrial Chimneys • Industrial Blowers, and Suction Pipes etc.
Materials:
Silicone Coated Fibre Glass • Nitrile (NBR) • Natural • Neoprene
• Hypalon • Fibre Glass • Polyurethane • Butyl Coated Fabrics etc.

Air Springs
Kiran™ air springs are superior quality products, designed and built for
durability, performance, and value. Through strict design parameters,
Kiran™ air springs operate dependably in the toughest conditions and in
many types of industrial applications. You'll know you have chosen an air
spring brand that you can trust, one that stands for reliability and striving
for your complete satisfaction. With quality built into every Kiran™ air
spring (air bags), they are made to last.
Bellows air springs have one, two or three convolutions in the flexible
member. There are two styles of bellows:
• Crimped Design
• Sleeve Type
With the crimped design, the end retainers are permanently attached by
mechanically crimping the retainer around the built-in bead wire of the
flexible member.
Sleeve type bellows offer similar characteristics to the crimped design
bellows, but, as with the sleeve type rolling lobe the flexible member is
constructed without internally molded bead wires. The end retainers are
permanently attached by pinching the flexible member between the end
retainers and external crimp rings which are then swaged to the proper
diameter.Sleeve type bellows offer the lowest force to compress of any
type of air spring.
Applications:
• Lift springs for lift axles on trucks and trailers
• Ride springs for trucks and trailers
• Actuators and isolators for industrial application
Our primary function is to design and manufacture custom sizes as per
client specifications, drawings or even samples. Apart from custom sizes
we are also involved in manufacturing standard sizes and stocking most
of them for easy transactions.

APPLICATION

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. KRI Safety Mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like

High Voltage Panels
Power Transformer Rooms
Near Bus bars
Anti Skid / Flooring
Sub-station
LT & HT Labs
Near Control Panels etc

FEATURES

All Products Tested by IRMRA, Thane
Product conforms to IS - 15652 - 2006
High Di Electric Strength up to 69 Kv.
Insulation Resistance 2.08x109 ohms.
Fire Retardant. Self Extinguishing
Resistant to Acids, Alkalis and Transformer Oil
Water Proof, Antiskid
Devoid of Any Metallic Derivatives
Suitable for Both A.C. & D.C. Electrical Installations
Easy Installation, can be pasted
Good Abrasion Resistance
Thickness : Voltage System
2.0 mm : Up to 3.3 Kv
2.5 mm : Up to 11 Kv
3.0 mm : Up to 33 Kv
3.5 mm : Up to 66 Kv

KIRAN conductive sheets are globally appreciated for consistent quality and precision. These sheets come in standard sizes of 1000 mm x 2000 mm but can further be customized to any size you require. We manufacture these sheets in a variety of thickness ranging from 2 mm to 25 mm. These sheets normally have a plain finish and they come in a variety of colors depending on your requirement.

These products are extensively used in the transformer stations, power plants and electricity distributing stations.EPDM, Neoprene and Natural Rubbers are considered to be good polymersfor this use.

These sheets confirm to BS 2050: 1961 standards.The electrical conductivity we offer is < 5 x 104Ω.

Technically, coated fabrics are flexible composite materials formed by
bonding either one or both sides of the fabric with special adhesives and
coating them precisely with different elastomers*. The curing process
makes the bond between the fabric and the elastomer stronger. This
makes it washable, durable and high on quality.
*  We manufacture an extensive range of coated fabrics which include
the following polymers:
• PU Coated Fabric
• Silicone Coated Fiberglass
• NBR Coated Nylon Fabric
• Neoprene Rubber Coated Nylon Fabric
• Neoprene Rubber Coated Polyester Fabric
• Hypalon Rubber Coated Nylon Fabrics
• Hypalon Rubber Coated Polyester Fabric
• Butyl Rubber Coated Nylon Fabric
• Polyurethane Coated Nylon Fabric
These sheets are widely appreciated for their durability and resistance
to corrosion. We manufacture these products as per the ISO standards
to maintain a high level of quality. These products are manufactured by
using the latest available technology which helps us to keep up with the
changes in the current dynamic market.
Kiran™ elastomer coated fabrics excels in performance because of their
special chemical characteristics. Elastomer coated fabrics are very close
textured and therefore exhibit low permeation and diffusion. They can be
electrically conductive, chemically resistant to acids, alkalis, fuels and
oils etc. and it also can be weather and temperature resistant. Kiran™
elastomer coated fabrics are available in a range of thickness ranging
from 0.5 mm up to 50 mm.
With our expert R & D team and vigilant quality control team, we assure
our customers of consistent quality and precision.
Width : Any size up to 1500 mm x Long length
Thickness : Any size between 0.3 mm up to 2 mm
Color : As per your requirement
Customization : Multiple polymers with customized length, width &
thickness possible.

SPEED BREAKERS
We at Kiran Rubber Industries are manufacturer and exporters of rubber
speed breakers that are available in various customized sizes. These
rubber speed breakers are widely used in parking lots, malls, highways,
industrial complexes, factories etc. Our speed breakers are easy to
install and available in various sizes that exactly suits the client's and
industry's requirements. We also customize these breakers as per
client's specifications.
50mm high speed ramps slow traffic to 10mph.
75mm high speed ramps slow traffic to 5mph.
Characteristic of Speed Bump
• Black & Yellow color combination for greater visibility.
• Rubber as a base material helps it in making better grip on the road.
• Moisture & temperature resistant.
• Instant installation with the application of epoxy and bolts.
• Modular design provides easy installation.
• No need to paint again & again due to pre-color, hence painting
cost is NIL.
• Black and Yellow color used by us are UV resistant.
• Provides much better comfort for passengers in the vehicles.
• The design on the speed Humps makes easy drainage of rain water.
• Any length of speed humps is possible as the design/sections
are modular
INSTALLATION
Simple to install, for bolting down to good tarmac or concrete surfaces at
least 100mm thick.
Due to variable specifications of vehicle designs some "grounding" of
vehicles on ramps may occasionally occur.
BENEFITS
Rubber speed bump encourages drivers to slow down. High-visibility
black and yellow design attracts drivers' attention, slowing traffic and
ensuring pedestrian safety. Ideal for use at intersections, pedestrian
crossings, toll gates, parking lots and service stations.

Corner Guards are constructed from high impact resistance NATURAL
rubber. They are designed to protect the edges of columns in structures.
Corner Guards (Column-Guards) relieves the tension of chipped &
broken corners of pillars / columns. They are mounted onto the edges of,
preferably all the 4 edges of square columns of basement parking as well
as the edges of walls in industrial premises. They are suitable for
medium & heavy traffic areas & also moving trolleys / objects. They are a
perfect solution for chipped edges in car parks, hospitals, nursing
homes, laboratories, hotels, schools, sports areas and a multitudes of
other commercial properties.
FEATURES
• Corner Guards come in a standard length of 1 meter, 1.2 meters & 1.5
meters. Other sizes available on request.
• Standard color of Corner Guard is black, but Yellow cover strips are
available on request .
• The guard is available with or without galvanized - iron insert clips.
• Appropriate for Indoor and Outdoor Protection.
• Application include car-parks, basement parkings, industrial &
commercial premises.
• In-plant corners protection from moving objects.
• Resistant to all type of weather.
• Installs easily with the help of anchor fasteners and epoxy.
• One piece construction.
• Chipping of the column edges is prevented, hence maintenance is
avoided.

EPDM rubber is a class of synthetic rubbers made primarily from EPDM
polymer. EPDM rubber shares a chemical structure that gives them an
extra ordinary resistance to Heat, Cold, Sunlight and air pollution which
are ideal characteristics for a roofing membrane. It is extensively used
for roofs with poor drainage or where the waterproofing is to be covered
by gravel, soil, decks or pavers. In addition to these qualities it is fully UV
stable and it can be used for fully exposed applications.
We manufacture EPDM roofing membrane with or without fabric
insertion having cloth impression (textured finish) on one or both the
sides.
Features:
• Long durability
• Elongation up to 350 %
• Easy way to fix
• Highly stretchable and flexible
• o o Works under extreme environmental condition (-45 C to +150 C)
• Resistant to Ozone
• Resistant to Sun light and UV radiation
• Zero maintenance
• Environmental Friendly
Availability:
• Colour: Black only with or without self-adhesive backing.
• Textured finish on one or both sides.
• Maximum width up to 1500 mm.
• Thickness range: 1 mm to 5 mm.
• Length: 10 Mtrs to 30 Mtrs long rolls.
EPDM Membrane Sheets
(Water Proofing Sheets)
Foam Tapes
Kiran™ offers a wide range of pressure sensitive foam tape products.
These double coated foam tape products are available with synthetic
rubber adhesive or an acrylic adhesive in black, white and many other
colours.
Our double coated foam tape products offer high tack, excellent shear
and aggressive bonding strength. We are now offering permanent and
removable adhesives, paper and poly liners. The poly linered foam is
used widely in window glazing applications.
These foam tape products offer great conformability and adhesion to
irregular or uneven surfaces. The synthetic rubber is formulated to resist
UV aging and offers immediate quick stick. The acrylic adhesive offers
great resistance to temperature extremes and other elements.
We manufacture these foam tapes in different polymers as mentioned
below:
• EVA Foam – Ethylene Vinyl Acetate
• Nitrile (NBR) Foam
• Neoprene (Chloroprene) Foam
• Regular Sponge Foam

These extruded profiles are also made available in size variation of 1 mm
diameter to 300 mm diameter having different shapes, sizes and a variety colours.We manufacture an extensive range of extruded products such as Strips, Tubes, Gaskets, Custom shaped profiles etc.

We offer our clients a wide range of window seals and glazing cords that are manufactured using superior grade raw material. Processed using latest technology, these products are able to meet the dynamic changes in market. With the help of our experienced team, we offer them in various customized sizes. Our product range includes the following:
• Glass Beddings • Sealing Strips
• Cords • Channels • Insulation Sleeves
EPDM Construction Profiles (Glazing)
EPDM Glazing Construction Profiles is widely used in construction of buildings, bridges, walls, seals, weather strips for windows and doors in construction industry and many kinds of strips used on machines. It has excellent resistance to oxidation, ozone resistance and erosion resistance ability.
Features:
• Non Toxicity
• Non Tasteless
• Easy Installation
• Surface leveling, foam density uniform
• Weathering and Anticorrosive
• Resistant to Salt Water, Oil, Acid, Alkali and Chemical Corrosion
Specifications:
• Material:EPDM material
• Size: Customized
• Color: Mostly black, various colours available on request
• Usage: machinery, electronic appliance, bus, oven, industry, window, door
• Process: extrusion
Polymers
• Silicone • Natural • Nitrile • Neoprene • S ponge • E PDM
Silicone Transparent Tubing's
A comprehensive range of silicone tubing, with bore sizes from 0.2mm ID
up to 200mm, meets the demands of practically any application. Manufactured to fine tolerances the smallest silicone tubing manufactured by Kiran™ is most commonly used as electrical sleeving, whilst midrange sizes are generally used to carry fluids and powders within the food processing and pharmaceutical industries.

Kiran™ offers a wide selection of Water Council and Food and Drug Administration (FDA) approved materials for use specifically within hygiene-critical applications. We also stock a huge range of 70 sizes in translucent platinum cured silicone (non-yellowing) from 1 mm to 100 mm bore.

In response to customer demand, Kiran™ offers25m minimum quantities on standard stock tubing for customers that require small quantities but typically hold from 1000-5000 meters of each size for rapid supply of higher volume requirements. If not in stock, we can produce these within a short period for quick delivery.

Kiran™ silicone tubesare also available to order in any colour.

Leveraging on our vast industry experience and knowledge, we have engaged in providing high quality Silicone Transparent Tube that is available in standard as well as customized options. This is designed and developed as per the latest technological advancements from quality tested raw materials. Due to optimum performance, compact design, corrosion resistance and durability, this Silicone Transparent Tube is highly demanded in various industrial units. We assure our clients that this product is quality assured and is at reasonable price.

For Pharmaceutical, Medical and Electronic Applications

Silicon Elastomer is based on a unique chemistry developed in early 60's. Basically a strong alternating Silicon and Oxygen atom backbone in the silicon molecule is responsible for many of its inherent properties.

Silicone elastomers are simple very long chain of silicone molecules called polymers, chemically bonded together to achieve specific property profiles.

Silicone's chemical structure imparts these special characteristics and advantages.
Extreme temperature application, -180 oF to 600 oF (-118 oC to 316 oC)
Inert, odorless, tasteless, stainless-ideal for medical and food applications.
High resistance to weathering and oxidation.
Excellent electrical qualities-many superior dielectric and insulation
characteristics in special compounds.
Superior resistance to many chemicals.
High resistance to ozone and corona.
Very good thermal resistance - special flame retardant compounds are available.
Superior water resistance - low water absorption.

Silicone Transparent Tubing Brochure

Silicone Transparent Braided Tubing

Braided Tubes

With the help of our professionals, we have been able to offer our clients a broad array of Braided Tubes. These tubes are manufactured by our professionals with advanced technology using high grade natural rubber. Available in various widths and lengths, these Braided Tubes can also be customized as per the requirements of clients. Recognized for high resilience, abrasion resistance, good impact resistance and high durability, these tubes are offered to the clients at the most affordable rates.

Available in sizes from 0.5mm ID to 100mm ID

Wemanufacture a vast range of boats, life jackets, industrial gas
balloons, flexi ponds and others. We use various grades of quality raw
material to manufacture our durable range. The raw material comprises
of coated fabrics, valves, and adhesives which are procured from top notch manufacturers. Our product range includes:

10 Persons Boat
Banana Boat
Bumping Boat
Flexible Tank
Flexible Pond
River Rafting Boat
Gas Holder Balloon
Inflatable Boat
Life Jacket
Flexi Separator
Shelters
Dinghy

The salient features of our product range are standard load carrying
capacity, standard accessories, standard weight of boat, Ideal
propulsion and rigid construction
Our flexible tank and flexible pond is known for their attributes of
portable, transferable, easy cleaning, compatible and collapsible. In
addition to this, we also have the ability to custom make our range as per
the specifications provided by the clients.
Fabrication Facility
We possess a well-furnished fabrication facility with latest technological
advancements. This has enabled us to meet the varied demands of
customers spread across the globe. Our fabrication facility is spread
over an area of 5000 sq. ft. with an installed capacity of 100 units. The
entire unit is segregated into various sections facilitated with necessary
machines and equipment to ensure smooth manufacturing process.
Some of the machines installed in the facility are as follows:

Cutting
Drilling
Welding
Molding
Bending
Shaping

We offer a wide range of molding products that are tested on different
parameters before dispatching. We customize these products as per the
requirement of our clients and offer them at affordable prices. To ensure
their quality, we manufacture them as per the ISO standards of industry.
With the help of our dexterous team, we manufacture superior custom
rubber products. These rubber products are manufactured as per the
technical specifications and drawings provided by clients. These
products are available in continuous length or pre-joints in D-shape, Lshape,
U-shape, square & rectangular shape.
Product Range:
• O Rings
• U Rings
• V Rings
• Oil Seals
• Gaskets
Rubber bellows, heat exchanger gaskets, synthetic rubber bellows,
synthetic bellows for a broad range of industries, including medical,
aerospace, commercial, industrial, government/military, hightechnology,
office automation and transportation as well.
Molding is a preferred method where tolerances and consistency are
critical. Although an initial part tool cost is taken for the mould, the
moulded items are cheaper to produce.Molded products are supplied in a
variety of polymers such as Silicone,white EPDM, white food quality
natural, chloroprene,etc. Available in multiple colours, these products
are a favorite to our customers.
Sponge Products
Open cell and closed cell from a variety of material such as EPDM,
neoprene, PVC nitrile, silicone, as well as polyethylene and many more.
Many types of foam can be produced with a self-adhesive backing. We
also supply furniture foam, which has many more applications than just
furniture. These are supplied in sheet, strip or any cut profile shaped
form as well.

We specialize in the supply of custom hoses and fittings particularly for
the mining/offshore industries. We stock and manufacture a wide range
of industrial rubber hose and hose assemblies. Flexible hoses and
assemblies are used for a wide variety of purposes in modern industry.
Our aim is to hold extensive stocks to supply these demands, or to
manufacture hose and deliver at short notice.
Made from Silicone, Hygienic Rubbers (Food Grade), Thermoplastics for
food, beverage, chemical, pharmaceutical, petrochemical applications.
assemblies, flexible hoses, ductings, industrial rubber and plastic hose,
tubes, couplings and hose fittings.
Application:
Ex Stock Service - Air, Water, Irrigation & Drag, Chemical, Oil, Fire,
Mining, Abrasive, Shotblast, Brewers, Dairy, Steam, PTFE, Stainless,
Hydraulic, Concrete Pumping, Cable Protection and PVC.Suction and
discharge of oil products, storage and transport offshore and onshore.
Built in ends, internal/external swaging,
Fittings:
Flanges, Couplings, Quick Release Fittings, Bandit, Hi Torques.

Kiran™ range of M24 (24 MPa) conveyor belts are abrasion resistant and
highly resistant to cuts and gouges. These are used frequently in the
mining industries, process industries such as Cement, Crushed ore steel
and metal, stone crushing industries etc.
Kiran™ range of N17 (17 MPa) conveyor belts are abrasion resistant as
well though not requiring the same cut and gouges resistance as that of
the M24 grade. These conveyor belts are mainly used for conveying
bauxite, asbestos, ash, chalk, cement, lime, surface coal etc.

Applications:
• Recycling, compost, mineral processing industries
• Silica, sand or materials containing silica
• Slag, Cooking, Broken Glass/Cullet
• Coal handling plants
• Cement, concrete plants
• Sand, gravel and stone industry
• Road construction machineries
• Timber industry and saw mills
Conveyor Belt Range:

Kiran™'D' shapefenders have a higher energy absorption capacity and
hollow section to help absorb impacts as compared to similar sized
cylindrical fenders.These fenders are made from resilient NR/SBR
rubber compound and are available in a wide variety of standard stock
sizes and types and a non-standard sizes and lengths available to be
made to specific lengths.
Kiran™ manufactures heavy duty Marine Rubber Fenders like Cylindrical
Fenders, D type Fenders, Square Fenders, Rectangular Fenders, W
Fenders, Key Hole Fenders, Wing Fenders, Delta Fenders etc. for Tugs,
up to 90 Ton Bollard Pull and above, OSVS, AHTS, MSV'S, PSV'S etc. Also
Fenders for Boats, Barges, Jetty, Marina, Jack Up Rigs / Platforms can
be catered, as per customised formats.

O Ring / Oil Seal / U Seal / V Seal