ROTARY POSITIVE DISPLACEMENT TWIN LOBE COMPRESSORS

SALIENT FEATURES:

This series covers the blowers from 36 AC to 615AC.
KE series was developed during the early days of Kay Engineering, hence called as KE Series Blowers.
Series covers the air cooled as well as water cooled blowers. Above 7000mmwg water cooled blowers will be supplied.
Capacity for KE series Blowers ranges from 60m3/hr to 1431m3/hr with pressure application from 1000mmwg (0.1kg/cm2) to 10000mmwg (1.0kg/cm2)
Well suited for V-belt as well as direct coupled drive.
Material of construction of the casing and lobes for all blowers in this series is C.I.F.G.-260 conforming to IS: 210.
Shaft material from 36AC to 59AC is alloy steel, EN9 (070M55).and above 59AC it is EN24 (817M40) conforming to BS: 970 Part-iii.

SALIENT FEATURES:

This series covers the blowers from 76 AC/WC to 1442 AC/WC.
Due to the piston ring arrangement used for sealing, this series is called PRT.
PRT series is the series of moderate size blowers and is applicable where air is required with high pressure. (Up to 1.0 kg/cm2 in single stage & up to 2.0 kg/cm2 in double stage.).
Series covers the air cooled as well as water cooled blowers. Above 7000 mmwg water cooled blowers will be supplied.
Capacity for PRT series Blowers ranges from 417 m3/hr to 31500 m3/hr with pressure application from 1000 mmwg (0.1 kg/cm2) to 10000 mmwg (1.0 kg/cm2).
Well suited for V-belt as well as direct coupled drive.

ROTARY POSITIVE DISPLACEMENT TWIN LOBE COMPRESSORS

SALIENT FEATURES:

This series covers the water cooled blowers from 5 LK/MK to 8 LK/MK.
Due to both side oil lubrication system this series allows high RPM.
Series covers only water cooled blowers and is divided into-

IMPORTANT FEATURES:

High reliability, Low Maintenance & Compact Design
Can be used with VFD to enhance the capacity of Side Channel Blower.
KAY Side Channel Blowers are UL/CCC/CE approved and can be used without any further testing all over the world.
Can work upto 20,000 hours without maintenance down time.
Built-insilencer ,Low Noise, Trouble free operation.

SALIENT FEATURES

This series covers the Gas Pump from 76 (GP) to 2064 (GP).
Kay gas blower pump is highly recommended in corrosive, Highly toxic , Poison , and flammable gas application.
Gas Blower is supplied with Double Mechanical Seal and complete thermo syphon system As per figure.
Heavy-duty bearing holders on thrust end for more axial load capability.
Large Oil Sumps for improved bearing lubrication.

ACOUSTIC HOOD

The unwanted, undesired sound is called noise. It causes general feeling of annoyance, interference with wanted sound, fatigue, damage to auditory mechanism and reduction in the efficiency of working performance. Regular exposure of the worker to the noise results in hearing losses. Now-a-days awareness about the sound level has increased, so we are in the need of a system which reduces the sound up to requisite level.

IMPORTANT FEATURES:

High Vacuum upto 0.001 mbar or better with suitable backup vacuum pump.
Kay Mechanical Vacuum Boosters latest Technology by bypass type design.
International design compliance to API/ISO/BS/CE certified standards.
Advance technology Double sealing system for leak proof design.
Oil & Water free dry running operation makes clean operation .

IMPORTANT FEATURES:

High Vacuum upto 0.01 mbar or better.
International design compliance to API/ISO/BS/CE certified standards.
Advance technology Double sealing system for leak proof design.
Oil & Water free dry running operation makes clean operation .
Suitable for pumping toxic, corrosive and condensable gas by special material of construction.

IMPORTANT FEATURES:

Environmental – clean exhaust, no pollution.
High vacuum, strong pumping.
Advanced German technology. Suitable for one to one replacement of local or imported, similar pumps with lower cost and higher performance.
Equipped with check valve and oil anti-suck back device. (Inlet with check valve to prevent vacuum oil back into the system. No oil loss owing to the integrated oil return line)
continuous trouble free working for more than 3,000 hours .

TECHANICAL DATA

CAPACITY : 30 TO 30000 m3/hr.
ULTIMATE VACUUM : 33 mbar.

IMPORTANT FEATURES:

These Pumps are designed to handle gas, water and vapour.
Used in industries like paper, sugar, chemicals, waste oil re-refining, food processing etc for vacuum filtration, vacuum distillation.
Water ring pumps are the only alternative to steam jet ejectors for handling large amounts of wet vapor or liquid & small amount of solids as the pump operates in a liquid environment (Water).
Suitable for pumping toxic, corrosive and condensable gas by special material of construction.
It is ideal for wet processes such as filtration, drying, condenser exhausting & distillation.
Relatively low power consumption and low maintenance.
Low cost, minimum noise / vibration.

IMPORTANT FEATURES:

Excellent Ultimate Vacuum and pumping speed with high performance.
Improved oil anti- suck back system to protect the vacuum pump in the event of sudden stop.
Low Noise and Vibrations
Strong and constant pressure based oil circulation system to protect the pump.
Easy maintenance, Compact Design and High Reliability.
Convenient gas ballast valve control enabling open and shut down of gas ballast valve at ease while operational.

IMPORTANT FEATURES:

Completely Dry Operation.
Self-lubricating (Graphite) rotary vanes.
Dry Operations enables to make environment clean.
High Vacuum Level in continuous operation.
Effective Heat Discharge, the state of the art and precise manufacturing.
Application Serves: Handling & Lifting, Clamping Device, Pick & Place, Packaging, R&D Laboratory, Food & Plastic Industry etc.

IMPORTANT FEATURES:

High Vacuum upto 0.001 mbar or better with suitable backup vacuum pump.
International design compliance to API/ISO/BS/CE certified standards.
Advance technology Double sealing system for leak proof design.
Oil & Water free dry running operation makes clean vacuum.
Suitable for pumping toxic, corrosive and condensable gas by special material of construction.
No metal to metal contact between lobes and Casing ensures long Booster life.