The Spiral Wound Gaskets are composed of metallic continuous stripe with a special shaped profile, coupled with a continuous filling stripe (Asbestos, PTFE, Grafoil, Ceramic etc.,) evenly wound in concentric spiral under constant stress. The Spiral Wound Gaskets are reinforced on the inner and outer diameter by winding of several electrically welded spiral metal only.

The main property of  Spiral Wound Gasket, owing to elastic action of the special metallic stripe profile, is that of offering a perfect sealing under all fluctuating pressure and temperature conditions, also where temperature excursion has considerable value, maintaining tightening elastic recovering. This elasticity can be modified by a proper selection of components, and they can be installed even with flanges at standard working with lightly pitted or buckled by the use of flanges. A proper selection of materials (both metal and fillers) allows the spiral gasket to be adequate to the most various operating conditions.

The normal shape is circular but it is possible to make oval shape, oblong shape. They can also be combined with jacketed gaskets to tightening heat exchangers internal shapes. Spiral gaskets are made as per ASME B 16.20 to suit ASME B 16.5 flanges and as per “A” Series to suit ASME B 16.47 flanges. We also make spiral as per DIN 2632-2638, IS STDs.

Jacketed gaskets consist of a sheet metal jacketed and filter of Asbestos, CAF/Non Asbestos, PTFE, Grafoil etc. Which improves its resistance peculiarities to temperature and loads? By its structure easily compressible with tightening loads lower than those required for metallic gaskets. The metallic jacketed gaskets find their proper employment in the presence of high pressure and temperature. Metal Jacketed Gaskets offer an economical seal where sealing faces are narrow and can be produced in variety of shapes. The Metal Jacketed Gaskets are specifically recommended for sealing of heat exchangers, valve cover, autoclaves, manhole etc. The Metal Jacketed Gaskets are also made as per ASME B 16.20 table 21, 22, 23.

Metal Materials Used are soft iron, all grade of steel, brass, monel,Inconel,aluminium,brass,copper,titanium,nickel,inocoloy etc.

Rubber Gaskets are cut from moulded sheets. We also do rubber moulding in Natural, Nitrile, Neoprene, Silicon, Viton, SBR, EPDM, Polyurethane etc. Rubber Gaskets are made as per customer’s specifications.Rubber Gaskets are also manufactured in the form of Rubber Rope (Cord),”O” Rings, Seals, Extruded Products in different sections. Rubber Gaskets with metal insertion, segment (Dowtail) joints and single moulded Gaskets up to 4000mm Diameter are also manufactured by us.

Flange Insulation Kits are the most widely used form of controlling losses due to Corrosion. They can be used to control stray electric currents in piping at oil,gas,water,refinery, and chemical plants, to increase the effectiveness of cathodic protection systems and confine or eliminate electrolytic corrosion. The Design and selection of materials used in “Jayseal” flange Insulation Gaskets , meet the twin purpose of sealing the flanges and insulation metal parts to prevent flow currents responsible for corrosion.

Ring Joint Gaskets are produced from different solid metal types. They are used to stand high pressure and temperatures and they are employed where corrosive agents are present. These gaskets are obtained by mechanical working from forged or laminated metals in one single piece. They are employed in production and refining process of oil and chemical industries.

Ring Joint Gaskets are strictly manufactures to API-6A/ASME B16.20 specifications.Ring Joint Gaskets shall be either octagonal or oval in cross section and identify by R, RX or BX number that relates to flange size (NPS), pressure class and appropriate flange standards (ASME B16.47 or API Specification 6A).