It senses only metallic objects; Useful for medium counting speed; Short sensing gaps. These switches are available from 4 mm diameter (M4) to 140 mm diameter (M140) with sensing distance from 0.5 mm to 100 mm. These switches are most reliable option for applications in Machine tools, Foundries, Rolling mills, Automobile, Textile, Pharmaceutical, and Material Handling Systems.
It senses any object;Longer Sensing Distance; Medium counting speed; High position sensing accuracy. These are Infra-red type sensors incorporating advance and reliable technology. These are offered in tubular metallic, acrylic & plastic enclosures. Special models of Optical Switches are available with an integrated Optical Fibre cable for flexible mounting and for sensing miniature objects / high temperature objects.
It senses only ferrous objects/ magnets; High counting speed. These are available in M12, M18, M30 and above. Sensing range : 10 to 50 mm. Grade of protection is IP-68.These switches are used only for position sensing applications. These can also be used for Roto-meters, Direction sensing, Level Sensing of liquids.
These switches are ideally suitable for level monitoring applications. The sensing range can be from 0.2 m to 20 meters. These sensors have the ability to perform in dry and dusty environments. These sensors are immune to electrical noise levels generally present in the typical industrial environment. The ultrasonic sensors find applications for Anti-collision detection for cranes, Level controller for liquids and solids, Detection of moving object, Opening / Closing of doors by detecting motion.
Tilt switch level sensor is a very rugged and proven instrument for monitoring top level of bulk material stored in an open space or in a bunker / silo. It has a special level detecting probe which is beyond a preset angle due to piling of material. The sensor probe is available in a robust MS tube for solids and a light duty plastic tube for food grains and fertilizer. Special models for use in hazardous environment are available.
The RF Point Level Sensor is a most rugged and proven sensor for monitoring level in a chute. This is very useful for monitoring chute blockage. It is a special heavy duty disk / flange mounted probe. The probe senses only the steady level of coal lumps and does not actuate due to falling material dust or humidity.
The Ultrasonic level sensors of the Series SW 3051 are very useful for sensing high levels (up to 20 meters.) of liquids or slurry material. The sensor gives a 4-20 mA output signal to the controller and operates relays at preset high and low levels. Probes are available forsensing water levels of 5/10/15/20 meters.
Single-Probe Vibrating Rod Design
- Used for Wide Range of Powders and Other Bulk Solids
- Easy Setup – No Calibration
- Universal Power Supply
Jayashree Vibrating Rod Sensor provides reliable point level sensing in a wide variety of applications within powder and bulk solids markets. The vibrating probe principle utilized overcomes typical application difficulties associated with changes in material, electrical dielectric constant, temperature or humidity while providing reliable, solid state electronic circuitry, which requires no calibration. It has ability to detect a wide range of material densities.
