ICLEAN-GRP panelling system manufacturing technique, coupled with GRP formulation and specification, provides an impervious smooth surface which is inherently strong, resistant to damage and chemical attack.

CEILING

Demountable & Relocatable clean room Walkable ceiling partitions consisting sandwich type (double skin) flushed panels with High Pressure laminate(HPL) 4mm thick with Different infill options ,Material with GI/Alu Profile for reinforcement on Periphery , with proper Hanging system to withstand the walkable load ,provision for the Supply ,Light & Utility cut-outs including silicon sealant & all Necessary accessories.

Standard Panel size: - 1200 x 3000 mm, Panels Thickness: - 50, 80 mm, Infill: - PUF, PIR & Rock wool

DOORS

Doors are designed to flush into the wall panel / civil walls system on both sides We will supply the different Sizes of door as per the client requirement. Doors are fabricated from galvanized iron sheets duly epoxy powder coated (60-80 microns). Shutter has sheet thickness of 0.8 mm and the frame of 1.2mm. depth of door frame adjustable as per the panels thickness and shutter thickness of 46mm.

The following accessories are a part of the door: Hinges, Handles, Push plats ,Door closer , Door coordinator, Lock & key ,Vision panels ,Concealed flush bolt for double door , concealed drop seal , SS Kick plat , Door seal and ETC Standard Doors size: - 750 ,900,1000 ,1200 ,1500 ,1800 & 2000 mm (width) X 2100 ,2200 mm(Height)

Infill: - Honeycomb, PUF, PIR & Rock wool

ICLEAN produces a wide range of Cleanroom compatible doors, meant for air ingression in the room. The door is fitted with mechanically-interlocked vertical edges that add strength and rigidity, making them perfectly suitable for light and heavy use.

Cleanroom doors are available with an interfacing profile for a flush and easy installation on the existing walls.

• Fully flush surfaces with wall system
• A large variety of swing out pharmaceutical doors
• Manual, semiautomatic and fully-automatic sliding doors
• Doors And Accessories hardware by leading global manufacturers
• Custom dimensions
• Heavy-duty structure for high durability

Thick flush are doors made of 0.8 mm thick PU powder coated GPSP sheet with honeycomb kraft paper / PUF as infill, 1.2 mm thick GPSP powder coated door frames, with provisions for double glazing glass and hardware such as push plate, door closure, SS D handle, SS ball bearing butt hinges, concealed tower bolt for the double door, etc.

The major accessories required for Cleanroom constrction are.

Coving
3D corner coving
View Panels
Inbuilt / Projected Raisers
Supply and Return Air Raiser Grills

Static Pass Box

Double Walled Construction
Electro-magnetic Interlocking view panels
Mechanical / Pneumatic interlocking

Dymanic Pass Box

Two Stage filtration
Statically & Dynamically balanced Motor-blower
Electro-magnetic Interlocking

Horizontal Unidirectional Air Flow Units are designed for offering highest product protection by providing ISO Class 5 particle free work area for handling critical process. HLAF offers proven protection for the samples and processes. The work area is continuously supplied with positive pressure.

Vertical Laminar Air Flow Units are designed for offering highest product protection for samples and processes by providing ISO Class 5 particle free work area. The work area is continuously supplied with positive pressure HEPA filtered Vertical air flow.The laminarity of the flow prevents cross contamination between the items handled in the working space.
 

Horizontal Unidirectional
Vertical Laminar
Reverse Laminar
Vertical Laminar

Air shower is a self-contained air chamber installed at the entrance to cleanrooms in order to minimize the amount of particulate contaminants entering the cleanroom. Personnel move through the air shower while particulate contaminants are washed off with high velocity HEPA-filtered air jets. The high air velocity of 6000 FPM ensures efficient scrubbing action necessary to remove particulate matter. Contaminated air is then taken in through the base of the unit, filtered, and re-circulated into the chamber.
 

Two stage filtration- EU6 and EU 14
SS 304 doors with double walled flush glass view panels & door closer
Air cleanliness - ISO Class 5 (ISO 14644-1:1999 (E)
Air Velocities- 6000 fpm
Vibration Level - Minimum
Noise Level - Less than 70 dB

Clean room trolleys are designed for transporting sterile products under ISO Class 5 (Class 100) particle free work area. The work area is continuously supplied with positive pressure HEPA filtered circulated horizontal air flow.
 

Two stage filtration- EU6 and EU 14
Statically & Dynamically balanced Motor-blower
Battery back-up with inverter for 30 mins
PU coated Lockable castor wheels
SS 304 removable Shelves
Differential Pressure Gauge

Bio-safety cabinets are designed to provide personnel, environmental and product protection. Air flow is drawn around the operator into the front grille of the cabinet which provides personnel protection. Additionally, the downward laminar flow of HEPA-filtered air provides product protection by minimizing the chance of cross-contamination along the work surface of the cabinet. Because cabinet air passes through the exhaust HEPA filter, it is contaminant-free (environmental protection). All Class II cabinets are designed for work involving microorganisms assigned to bio safety levels 1, 2 and 3. Class II cabinets provide the microbe-free work environment necessary for cell culture propagation, and also may be used for the formulation of non-volatile antineoplastic or hemotherapeutic drugs. Bio safety cabinets are available in powder coated Galvanized Steel, SS 304 / SS 316 or a combination of both.
 

Two stage filtration- EU6 and EU 14
Double walled flushed Glass Side Panels
Sealed Fluorescent Lights with Milky White Diffuser
Clean Down Timer with Operation HOLD indicator
1-piece fully openable sliding toughened glass front door with counterweight arrangement
Alarm triggers in case front door is raised more than 8�

Reverse Laminar Air Flow Unit provides:
Operator Protection
Product Protection
Environment Protection
The downflow booth operates on a recirculatory airflow principle providing containment by air movement. A clean, constant, laminar downflow of Class 100 air is supplied in work area suppressing any dust clouds generated during open powder processing, removing and capturing airborne particles from the operator�s breathing zone. The Prefilters at the base of the rear wall, capture the airborne contaminants generated. Intake velocity at prefilters increases to ensure scavenging effect. A small percentage of air is discharged from the booth through the bleed exhaust HEPA filter to maintain the working space under negative pressure. RLAF is available in GI powder coated / SS304 / SS316 or combination.

Three stage filtration- EU4, EU4 & EU14
Double walled flushed Glass Side Panels
Statically & Dynamically balanced Motor
Double skin puff filled side panels
Horizontal internal covings at base
Differential pressure gauges
DOP Test Port

We offer a complete line of benchtop, walk-in, and teaching hoods, including a wide selection of hood accessories, cabinets, countertops and blowers. Our Fume Hoods combine effective control, from exposure to hazardous chemicals and agents used in the laboratory.

With a reputation for exceptional value, our fume hoods are found in industrial, pharmaceutical and laboratories across the country. We make Exhaust Hood keeping in mind maximum user comfort with exquisite workmanship. You can expect easy access to our knowledgeable staff at every phase of the project. Our quality and timely delivery ensures we satisfy even the most demanding customers.
 

Wide range of C-Frame systems for every need
Adaptable to changing demands of the lab
Easy to shift and easy portability
High load bearing capability
Easy access to rear ducts for stress free utility line maintenance
Modularity and aesthetics

Our Work Tables are manufactured in various designs and shapes, custom made to suit customer�s requirements. The construction material is epoxy coated galvanized iron with suitable thickness. The system are designed to be fitted with pedestal system and as per clients specifications. Provision for reagent racks, valves for water and gas along with required electrical connections and any other provisions as required. The system is designed and available with various knee gap models or continous modular styles.
 

High quality GI powder / epoxy coated
Various sizes and shapes and colors
Custom designed as per requirement
Shutters and drawers as required
Special hinges and electrical points
Leg space as per requirement