Slushing waste paper/broke/virgin pulp in a continues or batch operation
Low to medium consistency (4 to 6%)
M.O.C. S.S. 316 to M.S. Sandwitch plate fabricated & as per requirement.
Power consumption is reduced.
Dynamically balanced S.S. Pulper impeller with hydrodynamically designed vanes.
Easy Maintenance.
Capacity up to 16 cubic meter.

Low Consistency (2 to 3%)
Used for slashing of all type of waste paper and machine, Broke from paper machine.
Power efficient pulper with continuous application.
You can chose S.S. Perforated screen of 5 to 8 mm. Hole depending upon your raw material quality requirements.
Different size depending on requirements from 3m to 14m volumetric, capacity.
For automization suitable belt conveyor of 800 mm to 1200 mm width is optionally supplied.
M.O.C. S.S.316 to M.S. Sandwitch Material or as per requirement.

Design to remove unwanted particles like Staples, Stones Screws, Nails, Pabbles and other debris from stock and it collected in the reject chamber.
The Reject Chamber is provided with a glass which helps to observe the rejection collected in to chamber.
Clogging free operation.
It protects the rotating part of refiners, deflakers and other down stream equipment against excessive wear and breakage.
Zero fiber loss.
Motorized model is available.
Customized HD cleaner up to 2500 LPM are also manufactured.
Fabricated with S.S. 304 and 316 material.

Effective Separation of heavy & light material (Metal pieces, Pins, Plastics) from pulp.
Easy maintenance and minimum fiber loss.
The body is made out of mild steel with S.S. cladding. Special model is also available in S.S. 316 Sandwitch plate (S.S. and M.S.) with base frame and stifners in M.S.
A cyclone effect is formed in the separator by the S.S. Rotor, So heavy particle are carried outward by centrifugal force to the junk trap. The light rejection is further treated in secondary separator or vibrating screen.

Treatment of rejects from high consistency cleaner and other screening.
Remove rejects like plastic, knots etc.
Easy Maintenance.
Size as per requirements.
Made from M.S. fabricated body with S.S. 304 Screen.
Perforated Screen of 2.5 to 3.0 mm hole.

Thickner remove excess water from stock it made from CI moulds and M.S. / S.S. Vat.
Dia 1.2 & 1.5 mt. and deckle length as per requirements of process.
Input consistency 1% to output consistency 10 to 12%.
Improved Design of sealing arrangement to minimum fiber loss.
Thickner made out of S.S. / C.I. Moulds & M.S. / S.S. Vat.

Description / Specification of Agitators

We are involved in offering a wide range of Agitators to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Agitators. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Suitable for operation with large flat shaped contaminants.
Special design features avoid string formation.
Rotor edges hard faced.
Hole or slot screen basket.
Dynamically balanced rotor.

Multi vane aerofoil rotor.
Pulsation free rotor design.
Special rotor design avoids string formation.
Gentle screening.
For low consistency hole or slot basket.

Provides uniform CD flow/basis weight management
Does not require operator to balance unit in response to Flow changes
Dampens pressure pulsation
Reduces entrained air
Reduces fiber floc size

Slushing waste paper/broke/virgin pulp in a continues or batch operation.
Low to medium consistency (4 to 6%)
M.O.C. S.S. 316 to M.S. Sandwitch plate fabricated & as per requirement.
Poconsumptionis reduced.
Dynamically balanced S.S. Pulper impeller with hydrodynamically designed vanes.
Easy Maintenance.
Capacity up to 16 cubic meter.

Open type head box made out of the S.S. 304 plate suitable for low and medium speed paper machine up to 350 m/min.
Tapered flow header for uniform velocity conditions.
Uniform cross direction basic weight profile.
Two holly rolls maintain defloculation or fiber dispersion.
Easy accessibility of inside area for cleaning & easy of operation.
Stability of flow.
Minimum Maintenance.
Foam killing shower also provided.

Excellent former assembly for good formation and paper pick up of 32 to 120 gsm.
Mould & vat completely made out of S.S. material.
Suitable for machine up to 120mt. speed.
Minimum profile variation.
Tapered manifold for uniform velocity condition and evener roll for good defloculation.
Zero fibers loss due to rubber sealing.

DRY VAT TYPE

It is the heart of a paper/board machine.
It controls stick flow, pickup on the felt part and is responsible for good single layer/multi layer formation & substance profile across the full web.
Designed according to Production requirements.
M.O.C of Cylinder Mould.
We also supply phosphorous/S.S./ Bronze spiders with bronze strips with 10 gauge S.S. wire wounding on request.
Tapered flow header for uniform velocity condition. Design type of Vat.
Counter Flow Vat- This type used for mainly in Board M/C & Slow Speed.
Uniflow Flow Vat- This type used for good formation of Craft board & duplex board.

Designed for formation & drainage capacity optimization.
Wire Section is available either with cantilever type or run out type wire changing arrangement.
We also provide Top wire arrangements for multi layer & High gsm.
Consist of lot of drainage elements such as forming board, hydro foils, high Vacuum box to improve sheet formation.
All parts in contact with water or stock are made of S.S. and corrosion resistant materials.
Complete S.S. cladding structure is also available.

The highest possible dryness should be reached with least possible number of nips.
Pressing must not impact paper quality.
The press section should compact, Simple and rigid Structure.
Hydraulic & Pneumatically loaded press rolls with heavy duty framing.
Press section is designed for 180kg. - liner cm. load for efficient water removal.
It is double felted first nip for two sided dewatering used for higher efficiency of press.
Heavy duty press section with roll dia 430 to 1200 mm.
For high speed application grooved or blind-drilled roll is available.
Large diameter presses at high press load combine optimum performance with low investment, operation and maintenance cost.
Production increase, reduced steam consumption and efficiency increases in case of rebuilt of an exciting machine.

• Most suitable for kraft, liner, writing & printing or speciality paper because of
• Efficient water removal.
• High dryness achieved upto 50% in recycled furnish after this press in comparison to conventional press upto 45%.
• Production increase by18%.
• Improve the physical characteristic of paper.
• Improve stiffness & breaking length of paper.
• Less energy consumption (Power & Fuel) pertone of paper.

Dryer Section designed to optimize the drying rate, reducing the investment cost.
M.S. Fabricated dryers up to 2.0 mt. Dia and 25 mm to 36 mm shell thickness and the width up to 5 mt.
Dryer is suitable for 4 to 5 kg/ cm2 operating pressure.
The dryers are mirror finished and the width up to 5 mt.
Our dryer system components are designed to provide best drying efficiency and uniform drying control.
Heavy duty cast iron framing is also available its excellent for vibration dampening.
The drying cylinder can be provided with stationary syphons or inside bucket system for proper removal of condensate. (Optionally).
For high speed application above 200 m/min rope feeding arrangement is provided.

M.S. Fabricated M.G. Cylinder upto 16 ft dia & 4.2 mt. Width.
M.G. Cylinder are made from ultra O.K. Plate.
M.G. Cylinder suitable for steam pressure up to 175 psi.
M.G. Cylinder are mirror finished.
M.G. Cylinder can be provided with scooping system for removal of condensate efficiently.
For vibration free operation we will provide, Heavy duty M.S. Fabricated frame.
We also provide M.G. Cylinders with S.S. Coating surface. (Optional).
We also provide M.G. Hood for improves production & saves condensation of vapor. Hood made from M.S./S.S. Fabricated (optional).
M.G. Spur gear & pinion also provided in M.S. Fabricated/C.I./polypic material with hobbing cut teeth so it gives noise free operation.

M.S. Fabricated drum & C.I. Framing.
Reeler is designed on the principle of circumferential winding.
We will provided auxiliary (primary) arms is pneumatically operated for loading & mechanical arrangements for shifting of reel.
Working (secondary) arms is loaded for pneumatically.
Before the reeler camber pipe or camber roll are installed for creasing free reeling.
Having pneumatic loading arrangements which ensures tight reeling and automatic reeling change over system which reduces the loss during the change over.
Maximum paper real Dia 2000 mm.

The Rewinders are designed for precision slitting and rewinding job having high speed winding drums, maximum operating speed is up to 700 MPM.
M.S. Fabricated body with C.I. Slides & complete slitting arrangement. Optionally we provide Heavy Duty complete C.I. Body.
Pneumatically operated Rider Roll with complete slitting arrangement removing of wound Roll is done by pneumatically operated pusher Roll.
Uniforms tight winding of Rolls.
Clean & smooth surface of Roll.
Easy separation of slit Roll. (Without using wedges)
Easy and quick feeding of paper.
Rewinder is driven by D.C. / A.C. Variable speed drive.
For slitting arrangements we are provided pneumatically or Manually loaded knives