Fluidyne carried out an extensive market research to manufature durable and effective safety relief valves, industrial safety relief valves, flanged safety relief valves, industrial safety valves, flanged safety valves that are highly suitable for most chemical, petrochemical, oil, pharmaceutical, phartilizer, power industries and more. These industrial safety relief valves, flanged safety relief valves, industrial safety valves, flanged safety valves have high reliability and are approved by factory inspectors, inspectors under Indian Boiler Regulation (IBR), B.V., Lloyds and Chief Controller of Explosives. TELEFLO safety and relief valves are in used in above industries for over 35 years.

For Storage Tank, complete range of sizes :- 15 NB to 600 NB Flame and Detonation Arresters, Spark Arresters Free-Emergency-Conservation Vents Dip Gauges and Gauge HatchsVent nuts/Caps, Syphon bush, Fill caps, Lightning Arresters etc. Tyrus Valve, Vacuum Relief, Pressure Relief Valves. Available in : CS, CI, SS304, 316, AI etc. For more details on Tank Fittings, Flame / Spark Aresstors plz refer our section on 'Safety Fittings'

Our pressure reducing valves can be most commonly used in relay operated systems. But however for several applications SDF-operated control system is sufficient. Our specially designed pressure regulators are known as pressure regulating valves. Control valves that do not use auxiliary power source such as air and electricity are called as regulating valves. Our innovatively designed pressure valves directly receive power from the control system through pressure detecting means to actuate the valve. Key features of our high quality pressure reducing valves are

Pretty Cost effective because of high efficiency
Simple and design makes them easy to install.
Requires very low maintenance.
They are direct acting types valves which serve as the actuating means for operating the valve plugs.
These valves can be custom designed as per specific requirements.

Our control and shut off valves, stainless steel shut off valves come with effective and durable gate balls that remain lubricated for a long time. We provide control and shut down valves in various models like Swing Check Valves, Straight/ Angular valves and Y-Pattern valves.

Compactly and very delicately designed our flush bottom valves offer hassle free installation. The design also includes rising and receding discs that help stabilize the valve. Their sizes range from 15 NB to 300NB. If required we can customize few aspects of this effective flush bottom valves.

Premium quality float valves, stainless steel float valves are available with us in various shapes. These valves are designed very creatively, so that they offer optimum performance. These float valves, stainess steel float valves are available in spherical, dish , cylindrical shapes, and are operated by leave's and screw's. Our compactly designed valves come in varied size ranges, ranging from 15 NB to 300 NB.

Equilibrium (ball) float valves are mechanical float valves used to automatically control the levels in tanks and reservoirs. These valves are particularly suited for level control in gravity mains of short to moderate lengths. The Equilibrium Float Valve design has a relatively long actuating lever, providing for a long float travel to ensure a slow rate of valve closure and a reduction of induced pressure rises within the main.

Air Vent Valves

Description / Specification of Electric Drum Pump

We are involved in offering a wide range of Electric Drum Pump to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Electric Drum Pump. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Strainer And Filter Models

We are involved in offering a wide range of Strainer And Filter Models to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Strainer And Filter Models. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

These gauges are constructed with a solid forged steel bar main chamber and cover plates recessed to have perfect alignment of gaskets and glass. Though rated for 2000 psig. these are light weight and hence do not need any combursome supports for medium lengths. With special main chamber construction these gauges can be supplied upto 3000 psig. Main Chambers are available in C.S, M.S, SS304, SS316, P.P., P.V.C., FRP and Rubber lined. Gaskets are of CAF, GRAFOIL, TEFLON, NON-ASVESTOS, etc.

Our range of liquid level indicators are designed to provide high clarity indication of liquid level. The float-containing magnet in the indicator rises and falls with the liquid. As the float moves, this information is transferred to the indication rail mounted on the outside of the tube. The white and red indication flaps represent air and liquid level respectively. Liquid level is also indicated by follower - Magnet type indicator.

Our highly accurate remote level indicators help to keep a track on the displacement of the water levels in the boiler. When the water levels in the boiler rises, the increasing water column presses the red indicating liquid (sealing liquid) from the first phase into second phase and then indicates in the Inspection glass of the indicator. The water displaced from Phase one flows from the condenser into Phase three and then into the boiler. If the water level in the drum falls, then the indicating liquid in phase three in the inspection glass, falls correspondingly. The water vapor formation in the condenser takes place when the water level in phase three is constantly filled up.

Filling and air Relief Plug
Condenser
Screw Joint
Main shot off Valve (Steam)
Equalising Tube
Main Shot off Valve (water)
Screw Joint
Connection Pipes
Indicator Shot off Valve
Indicator Shut off vlave
Cleaning Plug of Valve
Cleaning Plug Inspection Clean
Requlating Valve

BCO - Offset Connection Tubular gauges Our BCO tubular gauges are superior in quality that are manufactured with a pair of auto shut off ball check valves with offset and union construction. Because of their simple design, and their ability to work without additional isolation valves they can be installed very easily and cost-effectively. The innovative offset construction of the valves enables glass tube's to be replaced while in use. Whenever the glass tube breaks the ball check arrangement automatically closes the valve seat and prevents wastage of any fluid. Glass tube protection in the form of " Tie Rods" or "Pipe Shield" is provided.

HDO Heavy Duty Channel Protector Gauges Our highly effective tubular level gauges come with heavy wall glass tubes with 3 mm thick machine made channel protector. Designed to endure extreme conditions these valves offer very high durability.

Our superior quality transparent level Indicators are equipped with heavy valve glass tubes fitted. These valve glasses are fixed with a heavy duty metallic frame, which is made from min. 3mm thick channel box type protectors. We can also provide auto-shut-off ball check, needle or ball valve isolator as an integrated part with these indicators, if required.
These are designed specially to endure to extreme conditions and they can easily withstand alignment stress. Our premium indicators are available in two varied models : Side Mounted type and Top Mounted type.

Highly efficient, our float and cord level indicators are perfectly aligned and come with a pulley and scale. Our float and level indicators are highly suitable for outdoor usage, as they use dust proof pulley housing. Spring Tensioning assembly is also provided additionally for guide wires. The floats available by us can be custom designed as per specific industrial requirements. 

For all types of Storage Tanks.
Perfectly Aligned guide wire, pulley and scale.
Ideal for outdoor installations. Cast Aluminum Pulley Housing.
Spring Tensioning assembly for Guide wires.
Float available of various desired designs and materials as per applications

Our dipsticks are made of superior quality Non Sparking material with calibrated scale for fast and accurate measuring of the fuel level. These equipment are designed for the personal safety of the person inspecting the tank. For measurement, simply dip the stick in the tank and the fuel level can be read off against the calibrated scale on the side of the dip stick.

Stainless Steel Tape in range of 5 M, 8 M, 10 M, 15 M, 20 M and 30 M standard lengths. The assembly consists of a brass weight tape spool and handles for holding the assembly and retracting the tape. 

Fluidyne DIP TAPE ASSEMBLY is suitable for measurement of Tank and Vessel Level of oil and other comparable liquids.

Specifications :

Material:cloth tape
Use:Carton Sealing
Adhesive Side:Single Sided
Adhesive:Rubber
Adhesive Type:Hot Melt, Pressure Sensitive
Feature:Waterproof
Design Printing:No Printing
Place of Origin:Mumbai
Brand Name:Fluidyne Inst. pvt ltd
Material:nylon cloth
Adhesive:one sided
Color:black
Service:OEM
Price:reasonable
Quality:good
Appliance:for making shoes
Packaging Delivery
Packaging Details:plastic bag and carton
Delivery Detail:15-20Days

Weldneck, screwed, slip-on forged flanges. Flange taps, vent and drain. Orifice plate of SS, Monel with tag. Plat design as per B.S./A.P.I. Std. H.T. Bolts and Nuts. Jack screw provision.

Available in Flanged, Screwed and Pad types. Double/Single Window Full View, Angular. Rotating wheel, Flapper and Dip tube design. S.S.C.I, C.S, Bronze, P.V.C, P.P, Lining of Rubber, Teflon, Lead, F.R.P. Plain and Reflex gauge glass. Toughened Borosilicate, Moulded, Pyrex. Rectangular, Round, Cylindrical. Peep-hole glasses with mica for high temperature. Pad mounted-Round/Rectangular.

Manometers, industrial manometers are used in various industrial application for pressure and vacuum measurements. Manometers and industrial manometers are also used for flow measurement techniques. They are available in wall-mounting or pedestal type and 'U' tube or single limb type. The manometers, industrial manometers may be of inclined type or provided a vernier scale for obtaining greater accuracy.

The normal accuracy of the manometer is 1 mm but by providing a inclined tube 0.1 mm or better accuracy can be obtained. A movable vernier can further provide a readability of 0.1 mm. Gradiations in inches and cms are Standard Special type of Scales can be provided to take care of specific requirements, 

We have pleasure in introducing our superior variable area flow meters and rotameters and industrial rotameters with special types offered for general industrial service and instrumentation requirements. Glass tube rotameters are offered where general flow measurements are within the limitations imposed by pressure rating of the glass metering tubes. For higher pressure ratings we offer metal metering tubes. Rotameters and industrial rotameters manufactured are of panel mounted types as well as pipe line mounted types. The pipeline mounted instruments are constructed to withstand pipeline installation stress, strain and vibrations. The unique gland arrangement ensures zero leakage and long life to the metering tube.

Plunger-Flapper-Paddle-Diaphragm Types. Magnetic Glandless Switching. Micro Switch, Mercury and Air break type. Flanged, screwed connections. For Alarms, Tank overflow and motor control. Special design to: vertical/ horizontal flow. Level switch -Nine types for every application. Internal, external, side and top mounted. Micro Switch-Mercury, air break and air Valves. Operating Alarms, Motor Control, Level Control, Snap Action contacts with NO/NC contacts. Float operated Magnetic and Glandless.

FLUIDYNE MAGNETIC & BELLOWS SEALED flow switches are versatile instruments designed to handle any fluid. Standard materials of construction and glandless design offered render the switches compatible with most of the corrosive and toxic fluids. The easy-to-fix design reduces installation costs and time. Simple mechanical parts ensures high reliability and zero - failures. The microswitch of the instrument is operated by the deflection of paddle or plunge assembly due to velocity of flowing-fluid against the restraining force of the range spring through a magnetic scaled lever at a predetermined flow rate.

FLUIDYNE switch also senses flow - no flow, responding only to the velocity of fluid movement in a duct.They provide a positive signal to detect change or loss of flow velocity caused by closed damper, a loose fan wheel, a slipped or broken fan belt, a dirty or clogged filter or even an overload to fan motor. Large paddle are used for reliable velocity switching.

GENERAL SPECIFICATION:

Line size: 15mm to 1000mm (N.B.).
Mounting: vertical or horizontal pipe.
Range: refer table for standard range.
Repeatability / Accuracy: +1-5% of Maximum flow.
Process Connection: BSP/NPT for threaded versions,
                     (1" or 1.1/4" NB) ANSI # RF for flanged versions,
                     1/2" to 12" pipe threads for integral,
                     tee versions, special Sizes as per customer request.
Maximum Line Pressure: 10 bar for brass body.
                     30 bar for SS BODY ( higher rating available on request upto 300 bar
                     1 bar for duct mount version.
Maximum Process Temperature: 170 Deg.0 for brass body.
                     200 Deg.0 for SS body.
Pressure Loss: 60 to 80 m bar at maximum flow.
Mounting: vertical or horizontal pipe.
Switching: snap acting SPCO, (SPDT), DPDT
                     microswitch rated 5A, 230V AC or 10A, 230V AC.
Dead Band: 5 to 10% of maximum flow ( 10% at min. set valve
                     & 5% at max set valve ).
Enclosures: pressure die cast aluminium weather proof to I.P. :65 &
                     flame proof to Gr. 11 A & 118 of IS : 2148: 1981, on request.

Sensitron Thermocouples and wells are designed for making available to the industry a complete range of thermocouples for measuring temperatures from 150°C to 1600°C and, are highly accurate and sensitive. These thermocouples are offered with a very wide range of thermowells of different materials to suit the application.

Basically, a thermocouple is composed of two dissimilar metal wires butt welded together in a circuit. The circuit develops a small EMF, in accordance with See back effect, between the measuring and reference junctions. This EMF can be measured by means of any pyrometer in terms of temperature. 

Sensitron Thermocouples are fabricated by gas or arc welding or resistance welding in accordance with ISA recommendations.

Fluidyne manufactures and supplies all type of UV,FR and PR flame sensors. Fluidyne 'UV SENSOR' for oil and gas Flames Sensor flame or fire in the vicinity and sends signal to UV Flame Amplifiers. These sensors are suitable for detecting flame in chemical, petrochemical, power and pharmachemical industries and also suitable for residential or commercial establishments. Fluidyne manufactures all types of ultra violet flame sensors for oil and gas flames; Photo Resister Flame Sensors is suitable for oil flames. Fluidyne manufactures special sensors for other crictical applications. Quartz Glass protection Sheild is also supplied for these UV, PR, FR Flame Sensors.

Fluidyne Flame Amplifiers, Controllers, and Relay Model FFA-100 is a stand alone unit of ABS plastic molded body with two potential free relay contacts rated for 5A, 240V AC that can be used for alarm indication or safely-interlock purpose. The Fluidyne Flame Controller Amplifier Relay has an in- built switch-off time delay of 2 second in case of transient flame. The Fluidyne Flame Amplifier Relay works with Fluidyne make Flame Sensors as well as other makes and models. The rating of Fluidyne UV tube Flame Sensors should be 230V AC rms (325V DC peak). Fluidyne Flame Sensors can detect weak UV radiation in narrow bad around 260 nm and is not sensitive to visible light or infarred radiation, having quick response of about 40 milli seconds, with very high reliability and long life of over 20,000 hours. Fluidyne Flame Sensor and Amplifier Controller Relay is suitable for GAS, OIL , COAL, Electric ,LPG and CNC Flames. 

Fluidyne Flame Amplifiers, Controllers, and Relay Model FFA-100 is a stand alone unit of ABS plastic molded body with two potential free relay contacts rated for 5A, 240V AC that can be used for alarm indication or safely-interlock purpose. The Fluidyne Flame Controller Amplifier Relay has an in- built switch-off time delay of 2 second in case of transient flame. The Fluidyne Flame Amplifier Relay works with Fluidyne make Flame Sensors as well as other makes and models. The rating of Fluidyne UV tube Flame Sensors should be 230V AC rms (325V DC peak). Fluidyne Flame Sensors can detect weak UV radiation in narrow bad around 260 nm and is not sensitive to visible light or infarred radiation, having quick response of about 40 milli seconds, with very high reliability and long life of over 20,000 hours. Fluidyne Flame Sensor and Amplifier Controller Relay is suitable for GAS, OIL , COAL, Electric ,LPG and CNC Flames.

Operation
Flame Arrestors, detonation flame arrestors, detonation arrestors, flame detonation arrestors stop the propagation of a flame by absorbing and dissipating heat through the large surface area of the bank sheets. Ignited vapour attempting to pass through the arrestor is forced through small passages within the bank assembly. Heat is absorbed, lowering the temperature of the gas below its ignition point and quenching the flame. Flame Arresters are typically used in the chemical, petrochemical and pharmaceutical industries on applications such as storage tank facilities, flare stacks, incineration systems, storage tank roofs or digester convertor to prevent the propagation of confined and unconfined delfagrations. Detonation flame Arresters additionally stop the high pressures and velocities that can result in detonations. Incase of ignition of vapours they burn harmlessly at the flame arrestor, preventing ignition of vapours in the tank and subsequent explosion.
Design Features
The main benefits of the 'Fuidyne Atmos®. detonation flame Arrestor, flame arrestors, detonation arrestors, flame detonation arrestors are derived from ifs unique element design. The large channel openings provide excellent pressure drop to flow and enhanced flow characteristics often resulting in reducing overall size and cost of both Flame arrestor and piping. In addition to this the less restrictive nature of the larger channel openings result in less clogging and easier cleaning - both important maintenance considerations. Finally the element enables higher operating pressures to be achieved. The 'Fluidyne Atmos®' Flame Arrestor after extensive research has been certified and type tested by FCRI, B.V. and other government agencies, and has also received the most stringent approval for Flame Arrestors, incorporating extended burn time performance, and have acceptance with B.P.C.L, I.O.C.L, H.P.C.L, L & T , REL , RIL & B.H.E.L., and many chemical, pharmaceutical , power industries and petrochemical industries.
 

FLUIDYNE API 2000 Code EMERGENCY VENTS are designed to provide emergency pressure relief for storage tanks when exposed to overpressures that are not handled by standard tank vents. These vents provide the capacity to meet API standard 2000 for emergency venting due to fire exposure when properly sized. These covers also provide quick easy access for tank inspection and maintenance and provides pressure and vacuum relief . Vacuum relief must be achieved by special spring loaded venting devices attachment in such emergency pressure and vacuum relief vent covers. When excessive pressure builds within the storage tank the FLUIDYNE series emergency pressure relief vent begin to open at a predetermined set pressure relieving excessive pressure. When the overpressure has dissipated the cover reseat onto the base. FLUIDYNE emergency vents are available in several materials that are corrosion resistant to most petroleum product applications. The setting range is from a minimum of 50mm W.C to a maximum of 700mmW.C. Sizes are 400, 450, 500 and 600mm with flange drilling according to ANSI 150lb or API650

Our vents and fill caps are specially designed to hold a constant tank pressure, reducing evaporation loss, contamination intake, over expansion, and contraction of the tank. These caps are generally used for above ground storage and tanks holding gasoline or diesel. Additional elements can be mounted on top of the filler cap for specific operational purposes.

Made of quality material and components, our gauge hatch is used for controlling evaporation process and for dip measurement or for sampling purpose. Placed on the top of the tank, these hatches can easily be opened by pressing the latch with hand or foot. Our range of Gauge hatch is provided with bleeder attachment that makes it possible to relief pressure before opening the tank.
APPLICATION :
FLUIDYNE range of gauge hatches allow easy access to atmospheric liquid storage tank for manual level
measurement (dipping), temperature measurement and sampling. 
BENEFITS :
* Robust construction to cope with regular use.
* Range of size and materials to suit a wide range of application.
* Non-sparking feature, provide by the use of Nitrile rubber or PTFE insert.
* The cover is designed with a condensation rim. This encourages liquid drainage    form the surface to reduce the possibility of freezing.
* Lockable handle and gas tight seal to 2.5 psig.
PRINCIPLE OF OPERATION :
Provides tank access where manual level gauging, temperature measurement or sampling is required the safety pedal allows the operator to open the gauge hatch whilst remaining 'hand free' to carry out required measuring. 
ORDERING CODE :
MODEL-SIZE-PROCESS CONNECTION-MATERIAL-INSERT e.g. (FGH 100, 4", ANSI 150# Connection, Aluminium Body, Nitrile Insert).
 

APPLICATION :
FLUIDYNE range of non-sparking low pressure manhole covers provides easy access to low pressure storage tanks.
BENEFITS :
* Robust construction to cope with regular use.
* Range of size and materials to suit a wide range of application.
* Non-sparking feature, povied by the use of Nitrile rubber or PTFE insert.
PRINCIPLE OF OPERATION :
Provides tank access for maintenance and cleaning purposes. The manhole is secured by a transverse beam which is attached to the center of the cover. This ensures even distribution of the holding down force to form a gas tight fitting.
PHYSICAL :
* SIZE : 20", 24" OR SPECIAL AS REQUIRED.
* PROCESS CONNECTION : API 650 (20" and 24").
* MATERIALS : CARBON STEEL OR SPECIAL AS REQUIRED.
* INSERT : NITRILE / PTFE.
* PRESSURE SETTING : <2.5 psig.
ORDERING CODE :
MODEL-SIZE-PROCESS CONNECTION-MATERIAL-INSERT e.g. 100-20-132 (API MH 100, 20",API 650 flange, carbon steel, PTFE insert).
AFTER SALES SUPPORT :
FLUIDYNE provide comprehensive spares support and term preventative maintenance schemes using product-trained technicians to service FLUIDYNE and other of valves and fittings.

FLUIDYNE Excess Flow Check Valve also called FLUIDYNE Burst Control Valve or FLUIDYNE Hose Safety Check Valve or FLUIDYNE Velocity Check Valve. The valve has a sliding poppet within a chamber with an orifice at one end, wherein the closing flow rate settings can be adjusted. Precise adjustments can be made externally by turning an adjustment nut against a threaded screw extending at the end of the valve which causes a poppet to move within the chamber. As the poppet is urged toward the retainer by a coiled spring, the poppet is moved longitudinally within the chamber, either toward or away from the orifice. Turning the threaded nut enables to adjust the tension on the spring and therefore, the threshold flow rate of the valve could be precisely set. The valves operate by using the pressure differential across the valve to operate the poppet and spring assembly. The pressure differential is directly related to the flow of (SCFM) through the valve. When the pressure differential is within the operating limits - below the cutoff flow - of the unit, the force on the valve exerted by the spring is greater than that caused by the pressure differential the valve remains open and normal operation continues. When the pressure differential is above the cutoff limit, the force on the valve poppet exerted by the pressure differential is greater than the force exerted by the spring, and the valve closes. After the repairs to the line are made, normal operation is automatically enabled when pressure across the valve equalizes through the bleeder hole. The valve spring size can be specified by determining the air flow during normal operation and by estimating the flow if a failure or rupture occurs. FLUIDYNE Excess Flow Check Valve is used in filling lines and protects the system against excess flow rates and safely shuts off the flow due to hose bursts or excessive leakages downstream of the valve. FLUIDYNE Excess Flow check Valves are available in Standard Sandwich types suitable for mounting between a pair of flanges and also flanged screwed or butt weld connections types as per client requirements. 

FLUIDYNE Laboratory Stirrers have maintenance free Electric or Air motors driven mixing elements ideally suited for continuous duty stirring and mixing applications. Fluidyne Stirrers have sturdy adjustable stand, low noise, smooth start and stop with heavy duty AC/ DC Universal or Induction Motors ranging from 1/12 HP to 1.5HP. and speed 100 RPM to 15000 RPM. Retort Stand height ranges from 350 mm to 1500 mm. Capacity (depending on viscosity) ranges from 1 liter to 200 liters. Electronic or Autovariac speed control regulators are also provided on request. Coupling is of bush type or self centering chuck type. Material of construction is of Stainless Steel SS 304 or SS 316. Teflon or PP lined mixing elements also available for specific applications. Special GMP stirrers available for Pharmaceutical Industry.

FLUIDYNE Industrial Mixers are available in Stainless Steel SS304, SS316, Teflon or PP lined material of construction, are of three types :

DIRECT DRIVE MIXERS : These industrial mixers, stainless steel industrial mixers are compact and have application for low viscosity fluids. They are available in standard speeds of 960, 1400. 2800 RPM and 0.25 HP to 2 HP Induction motor. These mixers are flange mounted on top of tank or clamped to side of tank.
GEARED DRIVE MIXERS : These industrial mixers are slow speed helical geared mixers and are designed to provide long life and trouble free service in wide variety of viscous and semi- viscous applications. Selection of mixer depends on application, volume, viscosity and specific gravity. Speeds range from 100 RPM to 500 RPM and power range from 0.5 HP to 10 HP. These mixers are flange mounted or bracket/ clamp mounted for top entry or angular entry.
HIGH SPEED DISPERSER HOMOGENISER : These stainless steel industrial mixers are used for dispersing and homogenizing two or more liquids .They also break up and dissolve powders in liquid. They use either a saw tooth cutter for normal duty and stator- rotor combination for high shear rate applications. The power range is available from 1 HP to 7.5 HP and speeds 1400 RPM and 2800 RPM. Industrial Mixers are available in Stainless Steel SS304, SS316, and Teflon or PP lined material of construction for specific applications.

Our static mixers, industrial static mixers, stainless steel static mixers are a series of geometric mixing elements fixed within a pipe, which uses the energy of the flow stream to create mixing between two or more fluids. These static mixers, industrial static mixers, stainless steel static mixers are designed to achieve greatest amount of mixing with lowest pressure loss. Our static mixer, static mixers, industrial static mixers, stainless steel static mixers have a proven performance record in diverse industry for chemical processing, food, pharmaceuticals, waste treatment and more.

FLUIDYNE now offers a complete line of bung entering mixers and drum agitators. First model uses a folding propeller for low viscosity. Other model uses permanent blades and are offered in higher horsepower. All mixers fit through a standard 2" bung on a 210 litre or 55-gallon drum. The Shafts and propellers are made of 304 or 316 stainless steel.Folding propellers open to 3-3/4" when pump is in operation. Motors are available in TEFC (totally enclosed fan cooled) or explosion proof. Air motors are also available.

Description / Specification of Hydraulic Pressure Test Pumps

We are involved in offering a wide range of Hydraulic Pressure Test Pumps to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Hydraulic Pressure Test Pumps. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Fluidyne Make Static Mixers

We are involved in offering a wide range of Fluidyne Make Static Mixers to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Fluidyne Make Static Mixers. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design