Dispergum zinc soaps act as lubricants and reduce the compound viscosity.

Dispergum PT is a concentrated combination of zinc soaps of saturated and unsaturated fatty acids. Dispergum PT improves the filler dispersion and provides excellent flow properties and energy savings. Vulcanizates containing Dispergum PT show low Heat Build Up values.

Dispergum R is a zinc soap based on saturated and unsaturated fatty acids. It also contains special parafinic lubricants to improve flow and demoulding propties.

Dispergum 24 is a combination of a peptizer and a processing additive.The special synergistic effect of an oxidation catalyst and zinc soaps of defined fatty acids provides a positive influence on dynamical properties such as Heat Build Up.

Dispergum 36 is based on a highly active oxidation catalyst, combined with other organic and inorganic additives. Dispergum 36 is dispersed homogeneously and leads to excellent mastication results,even at low dosages.

Deogum 80 is a composition of fatty acid derivates and alcohols combined with lubricants. It acts as a multipurpose processing additive which can be used in a broad range of elastomers. In peroxide cross-linked EPDM-compounds, lower mould fouling and improved release effects are observed.

Deogum194 / 294 are both elastomer compatible organosilicone compounds. Due to their high temperature stability, both grades are particularly suitable for the use in special elastomers. They improve the demoulding properties without the typical silicone side effects, which can be seen with conventional silicone products.

Deoflow A, AM and D have dispersing effects on fillers and improve the flow and extrusion properties of rubber compounds.

Deoflow AM is the modified version of Deoflow A with improved anti-blooming properties, preferably for non-polar elastomers.

Deoflow S consists of calcium salts of saturated fatty acids and amides and acts as a lubricant and dispersing agent.

Deoflow Z is a modified calcium soap combined with fatty acid derivates and inorganic carrier.

Homogenisator 501/501D improves the homogeneity of rubber blends from polymers with different polarities or viscosities. These hydrocarbon resin provides a better building tack for raw compounds, and facilitates theprocessing during mixing, extruding, and calendering.

Deotack RS Deotack RS is an alkyl-phenol resin, commonly used in compounds requiring an excellent green tack. The addition of Deotack RS provides an outstanding long-term green tack.

Deotack P is a polyether plasticizer mainly for the use in polar elastomers, e.g. in NBR and CR.

Deotack 70 DL is a 70% dry liquid of Deotack P on a silica carrier. Due to its form as a dry liquid Deotack 70 DL is easier to dose and can be comfortably used without preheating.

Deotack P and Deotack 70 DL show positive effects on the tackifying properties of compounds with low tack. It is also especially suited for oil resistant products, as it is hardly extractable from vulcanizates by aliphatic hydrocarbons and mineral oils and therefore provides improved swelling properties.

Controzon waxes form a flexible wax film on the surfaces of the vulcanizates and protect them from crack formation caused by ozone attack under static conditions. Additionally Controzon waxes act as carrier for chemical ozone protecting agents and

antioxidants and improve their effectiveness. The addition of about 2 phr prevents the ozone attack known as the “frosting effect”. Supplied as pellets,Controzon waxes are easy to handle and to weigh.

The a. m. Deovulc grades are balanced accelerator blends for rubber articles, which must not show any blooming or staining effects.
Deovulc EG 3 is suitable for general applications requiring a medium cure rate and an average compression set.
Deovulc EG 28 provides high processing safety, rapid full cure and a high degree of cross-linking combined with low compression set values.

Deovulc BG 187 and BG 287 are accelerator blends for rubber articles,must not form any dangerous nitrosamines during production or storage.
Deovulc BG 287 has been developed for fast vulcanization processes and provides excellent temperature resistance as well as improved compression set.

Deovulc OTOS-80 is a preparation of the sulphena aceelerator OTOS (N-Oxydiethylenethiocarbamoyl-N’ -oxydiethylenesulphenamide) and is supplied as soft granules. Deovulc OTOS-80 enables the dust- and spot-free incorporation of this accelerator. Deovulc OTOS-80 improves the reversion stability as well as the mechanical and dynamical properties of compounds. It has proven to be very effective for antivibration applications (lower compression set, fatigue resistance and oxidative stability).
Deovulc TP 4-75 is a zincdialkyldithiophosphate, absorbed on a silica carrier. Deovulc TP 4-75 is used as an accelerator for nitrosamine-free vulcanizates based on EPDM or diene rubber. Due to its high solubility and light colour it is particularly suitable for the application in light compounds and also enables high dosages without staining or blooming.
Deovulc ATP-70 is an amine activated dithiophosphate, absorbed on a silica carrier system. Deovulc ATP-70 is designed for the rapid cure of EPDM and diene rubber and is generally applied in combination with additional accelerators

Deovulc ZO is a zinc-2-ethylhexanoate and acts as an activator for the vulcanization of natural rubber. The high solubility of Deovulc ZO often provides higher cross-linking density, which leads to improved compression set and dynamic properties. Partial replacement of stearic acid by Deovulc ZO is possible, e.g. to avoid blooming.

Deovulc ZO DL is a 67% dry liquid of Deovulc ZO.

Deovulc OH is a very fine calcium hydroxide, which acts as an acid scavenger and cross-linking activator in fluoroelastomer based compounds.

Deosulf sulphur preparations are dust free and enable a uniform dispersion.No agglomerations occur, local overcure is avoided and consequently vulcanizates with excellent ageing properties are obtained.

Deosulf U 60 enables the perfect incorporation of insoluble sulphur into rubber. The safety against scorch is improved and the danger of sulphur bloom in the uncured compound is reduced.

Deosulf L 95 contains 0.5% of organic dispersant. This sulphur preparation can be readily incorporated and uniformly dispersed. No local overcure appears and consequently vulcanisates with excellent ageing properties are obtained.

Description / Specification of Deovulc Vulcanization Stabllizer

We are involved in offering a wide range of Deovulc Vulcanization Stabllizer to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Deovulc Vulcanization Stabllizer. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

The carrier system of Deolink silane preparations is specifically developed for each silane grade, used are either polymer/wax systems or pure polymer systems. The comfortable handling of Deolink silane preparations enables the use in open mill mixing as well in in continuous mixing processes. The polymer carrier system protects the silane from ambient moisture. The carrier systems are inert and don’t show any agglomerates
Deolink TESPT Bis([triethoxysilylpropyl]tetrasulfane) is used to improve the physical properties of sulphur cured compounds and to establish the chemical link between rubber and silica or other active white fillers. Mechanical properties, e.g. modulus, compression set, tensile strength and abrasion resistance can be significantly improved by the usage of Deolink TESPT.
Deolink MX is a 50% preparation of thiocarboxysilane on a polymer carrier system. The bifunctional sulphur silane is compatible with all elastomers, which are suitable for sulphur vulcanization. Deolink MX can be used over a broad temperature range and is – at low dumping temperatures – often more active than conventional TESPT. Deolink MX contains a hindered mercapto group and can be used as an alternative to conventional mercaptosilanes. The protective group is
removed during processing releasing the mercaptosilane. By the use of Deolink MX the processing is improved to a higher scorch safety and the typical mercapto odour is avoided. The improved processing leads to higher injection volumes and a better process safety.

Description / Specification of Sulphur Factice Brown

We are involved in offering a wide range of Sulphur Factice Brown to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Sulphur Factice Brown. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Brown sulphur factitce For swelling-resistant articles based on NBR and CR. The swelling behaviour of Faktis NQ in mineral oils is comparable to that of articles based on 33% ACN-NBR; as a result, NQ improves the oil resistance in articles containing 18 to 28% ACN-NBR or CR.

Brown sulphur factice. For swelling-resistant articles based on NBR and CR. The swelling behaviour of Faktis RQ 18 in mineral oil is comparable to that of articles based on 18 - 28 % ACN NBR.

Description / Specification of Sulphur Chloride Factice Fot Eraser Production

We are involved in offering a wide range of Sulphur Chloride Factice Fot Eraser Production to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Sulphur Chloride Factice Fot Eraser Production. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design