FOR DETERMINATION OF CALORIFIC VALUE OF LIQUIDS & SOLIDS
This Digital Bomb Calorimeter provides a simple and inexpensive method for determination of heats of combustion of organic matter and the calorific value & sulphur contents of solid & liquid fuel.
The outfit supplied is complete for analysis as per the method recommended by British Standard Institution BS 1016.
All parts of the outfit have been finished and tested according to the specifications laid down by Institute of petroleum and British Standard Institute
Supplied complete with Certified Bomb, Calorimeter Vessel, Water Jacket (with or Without Puff insulation),  Stirrer,  Electronic Firing unit with Digital Beckman Thermometer, Printer, Nichrome wires, threads, Benzoic acid of know calorific value, Crucibles and all accessories.
Suitable to operate on 220V, single phase, 50 Hz AC Mains

This apparatus is used for determination of flash point and fire point of petroleum products open cup flash above 80º C as per specification IP 36 and IS : 1448 (P:69) 1969.  The apparatus consists of a cup, heating plate to specific dimension thermometer clip and test flame attachment with swivel joint for passing over test liquid surface in the prescribed manner.
The Instrument having Oil Test Jet / Gas Test Jet.
Heating is controlled by means of energy regulator fitted to the apparatus. 
Suitable for operation on 220 Volts, 50 cycles, AC circuits.

Made in accordance with specifications as IP:24, 123 & IS 1448(P:18)1967.
This apparatus is used for determination of distillation characteristic of Petroleum Products.
The instrument consists of metal shield fitted with asbestos board to support distillation flask with GEARED height adjustable device.
It has slide for vapour tube and lining having glass window for Clear view of inside objects.
The condenser bath is provided with Mild Steel black painted stand (without glasswares) electrically operated on 220 volts AC mains

his is a  high precision FULL VISIBILITY Bath with S.S Tank.
The outer casing is made of Aluminium and pointed in a pleasing color.
A Stirrer/pump keeps the temperature of the bath liquids uniform throughout.
The heaters are immersed from the top of the bath.
The temperature is controlled by Digital Temperature Controller cum Indicator.
Temperature ranges from 5°C above ambient to 120°C.
Suitable to operate on single phase,  220 Volts, 50 Hz

These viscometers are designed for viscosity tests of petroleum products. 
They confirm to requirements of IP 70 (former). 
Two adoption of Red Wood Viscometer are available No.1 for liquids having Red wood flow 20 to 2000 seconds and No.II for liquids whose flow time exceeds 2000 seconds.  The complete out fit comprises Stainless Steel bath with electrical heating arrangement by Immersion Heaters and controlled by Digital Temperature Controller cum Indicator.
The apparatus comprises tap, silver plated coil cup with precision stainless Steel jet, cup cover, ball valve, thermometer-clip, Stirrer and M.S. Sheet stand with leveling screws.
Temperature is uniformly distributed throughout the chamber by Stirrer.
Suitable to operate on 220 Volts, 1 ph, 50 Hz

This apparatus is made as per IP34, ASTM D – 93 and IS 1448 (Part I) 1270 (P.21) and IS 1209-1953 method B.
Used for finding out Flash Point above 70°C and below 300°C.
The instrument having Oil Test Jet (or)  Gas Test Jet Flame Device, stirrer with flexible shaft.
The assembly rests in Air Bath which is covered with Dome shape metal top.
The cup is fitted with insulated handle and locking arrangement near cup flange.
Electronic Temperature Controller with Automatic dipping cycle with Remote control Oil (or) gas jet.
Suitable to operate on 220 Volts,  1 phase, 50 Hz.