ESSRBOND MS 25 is a one component, Low Modulus, high performance sealant based on advance MS Polymer Technology. It is Solvent, Silicone and Isocyanates Free and Non-staining for natural stones applications. It has an excellent UV, weather and temperature resistance. It has excellent adhesion over a wide variety of substrates and is paintable with most common industrial paints. This sealant has been specifically formulated as a non staining sealant and for application to difficult substrates associated with modern facade construction.

ESSRBOND WPK 55 is a single component, solvent-free, high-build, liquid-applied waterproofing coating based on MS polymer technology that is designed to coat and protect roof and terrace of buildings. It cures as a result of a reaction with atmospheric moisture to form a tough, monolithic waterproof membrane.

It is well suited for enclosed wet areas like bathroom as well as complex structures such as flashings, roof skylights, etc., which would normally require elaborate workmanship..

1. Free of isocyanate, silicone, bitumen and solvents.
2. Low VOC.
3. Up to 10 mm crack bridging.
4. Resistant to influences of natural ground water.
5. Good UV-, weather and aging resistance.
6. Adhesion to damp surfaces.
7. Durable, no brittleness like bitumen.
8. Will not support organic growth.

ESSRBOND PG 101 is a high performance, self leveling, chemical resistant, Polysulphide polymer based joint system. It is resistant to many chemicals, shrinkage, aging, thermal stress and the effects of outdoor exposure. It is highly resilient and has excellent recovery characteristic after extended period of compression or elongation. 


Recommended uses : 
Concrete Roads and Highways 
Rigid Pavements in Airports 
Potable water retaining structure 
Floor joints in building 
Bridges 

Specification : BS - 5212 : 1990 - Type FB

ESSRBOND PP 110 is a one component low viscosity primer for porous surfaces to be used with ESSRBOND PG 101 and ESSRBOND GG 105. 
Recommended uses : Concrete surface, Natural Stone, Bricks and stained timber frame, Glazed tiles (Unglazed edge)

ESSRBOND FR 501 is an advanced MS Polymer technology sealant that provides movement capability in fire rated joint applications. It's ideal for sealing application which requires both fire and acoustic ratings. 

Elastomeric Intumescent Seal
Environmental Friendly
Paintable 
Silicon Free
Resistant To UV Light
Abrasion Resistant Including Foot Traffic

Specially formulated single-component, water-based, acrylic sealants used for firestop applications. It is effective in numerous UL systems for wall and floor through-penetrations and head-of-wall construction joint applications: 

Acoustic Fire Rated
Elastomeric Intumescent Seal
Sandable & Paintable
Water Based
Silicon Free