Manufactured using patented PureSat Oximeter technology from Nonin Medical Inc., USA
Provides fast & reliable SpO2 and Pulse rate measurements on any patient, from neonates to adults
Bright, easy-to read LED displays indicate SpO2 and Pulse rate measurements
User selectable High/Low Alarm limits for all parameters
8 segment bargraph indicates pulse strength
Sensor Alarm indicates that the sensor has been disconnected either from patient or from oximeter
Pulse Beep is sounded for every detected pulse, with the tone varying according to SpO2 value
3 Colour Perfusion LED – Green (good perfusion), Orange (marginal perfusion) & Red (inadequate perfusion)
Trends available for 11 patients - upto 24 hours for each patient
Built-in Rechargeable Battery with a battery back-up of more than 10 hours
Audible & Visual Low battery indication when 15 minutes remaining
Ideally suited for Spot Checking, during emergency air or land transport, Operation Theatres, ICU, Outpatient clinics or Emergency rooms
Wide range of sensors available with most of the sensor having 3 meter cable lengths

• Manufactured using patented PureSat Oximeter technology from Nonin Medical Inc., USA
• Provides fast & reliable SpO2 and Pulse rate measurements on any patient, from neonates to adults
• Bright, easy-to read LED displays indicate SpO2 and Pulse rate measurements
• User selectable High/Low Alarm limits for all parameters
• 8 segment bargraph indicates pulse strength
• Sensor Alarm indicates that the sensor has been disconnected either from patient or from oximeter
• Pulse Beep is sounded for every detected pulse, with the tone varying according to SpO2 value
• 3 Colour Perfusion LED – Green (good perfusion), Orange (marginal perfusion) & Red (inadequate perfusion)
• Built-in Rechargeable Battery with battery backup of more than 20 hours
• Audiable & Visual Low battery indication when 15 minutes remaining
• Ideally suitable for Operation Theatres, ICU, Outpatient clinics, Emergency rooms, or during emergency air or land transport
• Wide range of Sensors available with most of the sensors having 3 meter cable lengths

User selectable High/Low Alarm limits
User selectable Alarm & Beep Volumes
Two minute & Permanent alarm silence
Built-in Rechargeable Battery with a battery back-up of 12 hours. Charging time is 7 hours
Low Battery Audio & Visual Alarm
Oximeter Trends available for 144 hours (6 days)
Trends available on any Optional Parallel Printer
Ideally suited for OT, ICU, ICCU, NICU, PICU, OPD, Emergency rooms, or during emergency transport

Manufactured using patented PureSat Oximeter technology from Nonin Medical Inc., USA
CE Certified Product
Provides fast & reliable SpO2 and Pulse rate measurements on any patient, from neonates to adults
Bright, easy-to read LED displays indicate SpO2 and Pulse rate measurements
User Selectable High & Low Alarm limits for all parameters
User Selectable Alarm & Pulse Beep Volume
Plethysmograph waveform in 3 Wave speeds
Ten segment bargraph indicates pulse strength
Sensor Alarm indicates that the sensor has been disconnected either from patient or from oximeter
Pulse Beep is sounded for every detected pulse, with the tone varying according to SpO2 value
Trends available for 72 hours with scrolling
Waveform freeze with scrolling upto 60 secs.
Adult & Neonate modes
Power saving mode with Backlight timer and Off
Reversible background - light & dark
3 colour Perfusion LED - Green (good perfusion), Orange (marginal perfusion) & Red (inadequate perfusion)
Built-In Rechargeable Battery back-up of 6 hours
Audible & Visual Low battery indication when 15 minutes remaining
Ideally suited for Operation Theatres, ICU, Outpatient clinics, Emergency rooms, or during emergency air or land transport
Wide range of sensors available with most of the sensors having 3 meter cable lengths

Emco Meditek has been manufacturing Pulse Oximeters since 1989, with an installation base of more than 8000 Pulse Oximeters.
Now comes the EMCO oxi-mri 3600 MRI Compatible Pulse Oximeter incorporating fiber optic SpO2 sensor, for MRI environment compatibility
20 feet Fiber Optic Sensor (non-magnetic) avoids potentially hazardous heating or image artefacts during MR Scans
Suitable for use in 0.5 to 3 Tesla MRI environment
Noise/Artefact free MR images
Bright LED & LCD display which is easily visible from MRI Console Room
Built-In Rechargeable Battery back-up of 6 hours (approx. 8 procedures)
Alarm for sensor disconnection either from patient or from oximeter
Provides fast & reliable SpO2 and Pulse rate measurements
Suitable for Adult, Paediatric & Neonate
Audible & Visual Low battery indication

EMCO – Syringe Infusion Pump Infusor 860 is designed for the administration of Anti-Cancer Drugs, Oxytocics, Chemotherapy Medication, Anaesthesia and Life Saving Drugs
Front loading of Syringes for easy syringe placements
Bright Blue LCD with white characters for easy viewing
Built-in Microprocessor surveys all operating and alarm parameters
Self diagnostic facility – checks AC Mains and also prompts the user in case of Wrong entry
Simply start the pump by selecting the syringe and entering the rate
Titration - Only two actions to change the flow rate whilst infusing
Accepts syringes from 10, 20, 30, 50/60, 100 ml of major Indian brands such as dispovan, BD, Romsons, etc
Wide range of flow rates from 0.1 ml/hr to 400 ml/hr. Infusion Can be programmed in time (hr, min, sec)
High Volumetric Accuracy over the entire delivery range
Delivery of fluid at quick rate using Bolus facility. Bolus delivery can be Automatic or Manual
Bolus rate up to 1700 ml/hr for 100 ml Syringes & 1000 ml for 50/60 ml Syringes
“Anti-Bolus” system for patient safety
3 level Occlusion Pressure settings (High/Med/Low)
Display of Vital Parameters such as Rate of Infusion, Cumulative Volume Infused and Time of Infusion on LCD Backlit Display
Audio and Visual alarms to indicate Occlusion, Near end infusion, Syringe empty, End of Infusion, KVO, Low Battery, Insert Syringe, No Mains etc
Battery operation possible for Emergencies and Transport. LED indication for battery and mains operation
Fluid entry proof control panel to avoid damage to interior circuitry and malfunctioning of the pump
Ideally suitable for OT, ICCU, NICU, PICU, Pain Management, Ambulance, etc
More than 8000 installations of Syringe Pumps all over India

Intuitive & user friendly operations
Simple entry of parameters via numeric keypad
Automatic syringe size detection
Accepts syringe from 5 ml to 50/60 ml of all majors Indian Brands like Dispovan, Romsons as well as all imported brands
Programmable infusion rate up to 1500 ml/h (Max)
Titration allows change of infusion parameters without interruption of infusion
Programmable infusion in “volume over time” mode
Set-up menu enables customization of the pump
Easy Pump Mode – Syringe pump can be programmed to start infusion within 3 steps (Select Syringe, Enter Rate, Start)
Anti-bolus & anti-siphon functions increase patient safety
Drug library contains 27 frequently used drug names, Further 36 drug names can be added/replaced by the physician upto a total of 63 drug names
Automatic and manual bolus modes
Audio reminder during bolus
Last Configuration (Drug, Rate, VTBI, Bolus, Occlusion) is saved
Data Event Logging (2000 events) to PC (Software Optional)
Ideally suited for adults and neonates in general wards, critical and intensive care, operating rooms and emergency rooms

Flexibility to choose Mainstream or Sidestream Capnograph:
Mainstream Sensor (Capnostat 5)

Small, lightweight mainstream CO2 sensor provides accurate and reliable monitoring for all incubated patients from neonates to adults
Built for maximum durability, the sensor is tough enough to withstand everyday life in ICU or EMS environment
Useful in long-term ventilator management, verification of proper ET tube placement, confirmation of ET tube stability during transport

Sidestream Sensor (LoFlo)

LoFlo is the newest 50ml sampling rate sensor that provides consistent and reliable CO2 monitoring of adult, pediatric and neonatal patients
LloFlo’s broad range of sampling accessories helps in incorporating advanced filtering system & external sample cell that provides up to 120 hours of protection against occlusions which are caused by moisture/secretions
Useful in monitoring the effects of pain-controlled analgesia, monitoring respiratory efforts during procedural sedation, safety monitoring post-extubation, screening tool in the ED for respiratory complications such as asthma

8.4” Color TFT Display with maximum 11 waveforms
Standard Configuration - 3 Parameters - ECG, SpO2, NIBP
Upgradeable to Temperature, Respiration, etCO2, IBP, Recorder
3/5 Lead ECG with Pacemaker detection, Electrosurgical proof
Defibrillator protection and synchronization
Arrhythmia and ST Segment Analysis
Full 7 Lead ECG Waveforms
Selectable Layout - Standard Display, Large Font, Trend Screen & OxyCRG View
Trends - 96 hours, 500 sets NIBP, 50 sets 12-Lead ECG Diagnosis
Trends - Graphical/Tabular, Arrhythmia Events & Technical Alarms Review
User selectable alarms for all parameters
Nurse Call function and bi-directional communication with CMS Central Station
SD Card Slot enables memory extension for large data storage
USB & Serial ports enable easy future upgrades
VGA Output (Slave Monitor) and Analog Output
Easy mounting on Bed Rail & Optional Wall Mount

10.1” Color TFT Display with maximum 11 waveforms
Standard Configuration – 5 Parameters – ECG, SpO2, NIBP, Respiration, Temperature
Upgradeable to etCO2, Dual IBP, Thermal Recorder
Display of 7-lead ECG Waveforms in one screen
Arrhythmia and ST Segment Analysis
120 seconds full-disclosure waveforms review
Selectable Layout – Standard Display, Large Font, Trend Screen & OxyCRG View
Offline Trends available – 96 hours, 500 sets NIBP, 60 Alarm events
Trends – Graphical/Tabular, Arrhythmia Events & Technical Alarms Review
Drug Dose Calculation
Suitable for Adult , Pediatric and Neonate
Central Monitoring/Network capability through LAN Ethernet
USB port for saving Offline Memory

12.1” Color TFT Display with maximum 11 waveforms
Standard Configuration – 5 Parameters – ECG, SpO2, NIBP, Respiration, Temperature
Upgradeable to etCO2, Dual IBP, Thermal Recorder
Display of 7-lead ECG Waveforms in one screen
Arrhythmia and ST Segment Analysis
120 seconds full-disclosure waveforms review
Selectable Layout – Standard Display, Large Font, Trend Screen & OxyCRG View
Offline Trends available – 96 hours, 500 sets NIBP, 60 Alarm events
Trends – Graphical/Tabular, Arrhythmia Events & Technical Alarms Review
Drug Dose Calculation
Suitable for Adult , Pediatric and Neonate
Central Monitoring/Network capability through LAN Ethernet
USB port for saving Offline Memory

Incorporating latest medical gas sensor technology by Dragerwerk AG & Co. KGaA, Germany
First indigenously manufactured Anaesthesia Gas Monitor.
Continuous & Real time monitoring of 5 Anaesthesia Agents (Isoflurane, Sevoflurane, Enflurane, Desflurane, Halothane), etCO2, Respiration, N2O
Display of MAC (Minimum Alveolar Concentration)
Operates on Non Dispersive Infra Red technology.
4 models available.
Inspiration & end tidal values of all gases (Colour coded as per standards)
Sidestream gas measurement with sampling Rate @ 200ml/min
Automated Zero Calibration-first zero 35 min after power on, then once every 24 hours
Colour TFT Display – 7” with touchscreen.
Built-in Rechargeable Battery with battery back-up of more than 2 hours.
Ideally suited for Low Flow Anaesthesia in Operation Theatres.

Features of NIBP With Pulse Oximeter 4040

Manufactured using NIBP technology from Suntech Medical Inc., USA
Oscilliometric method measuring Systolic, Diastolic, MPA & Pulse Rate
Selectable Adult & Neonate functions with separate inflation and alarm setting
User selectable initial inflation pressure

Three modes

MANUAL
STAT (5 quick measurements) &
AUTP (measurements at user selectable time interval

Automatic pressure release for overpressure
Memory of last 99 measurements available for display & print-out
Wide range of cuffs available from 2.5 to 16 cms with

Oximeter Features:

Manufactured using Oximeter technology from Nonin Medical Inc., USA
3 colour perfusion LED index displays the perfusion status

Green (Good Perfusion)
Orange (Marginal Perfusion) &
Red (Inadequate Perfusion)

Pulse Beep is sounded for every detected pulse, with the tone varying according to SpO2 value
Sensor Alarm indicates that the sensor has been disconnected either from patient or from oximeter
Ten segment LED bargraph indicates pulse strength
Wide range of sensor available with most of the sensor having 3 meter cable lengths
Memory of past 24 hours available for display & print-out at intervals of 1 to 99 min

Features

A dedicated equipment designed for monitoring Pregnancies using the principle of doppler ultrasound
A complete self-contained system for fetal monitoring with permanently fixed 2 MHz transducer

Fetal heartbeats can be monitored from the 10th week of pregnancy
Detection of multiple pregnancies
Localisation of placenta
Identification of blood flow through umbilical cord
Frequent monitoring throughout pregnancy provides constant reassurance to mother

Output can be presented in three different ways: Built-in speaker & Headset/Stethoscope attachment
Hand held Battery powered audio unit (fits into palm)
Auto power shut-off for maximum battery life
Battery low indicator
Can be connected to mains through AC Adaptor

Features

LCD display with beck light, can be used in any illumination conditions
Accurate and reliable FHR detection with clear sound
High sensitivity probe with 2.0 MHz in continuous wave
Ergonomic design, portable and convenient
Built-in speaker
Automatically power off
Multi displaying of FHR: Number battery status indicator, voice intensity indicator
Building-in rechargeable battery and AC charger

Model D500

A complete self –contained system to carry out fetal, vascular and artetial investigations and monitoring, using the principle of Doppler ultrasound.
Three interchangeable transducers, 2MHz, 4MHz and 8MHz:

2MHz transducer monitors fetal heart beats from the 10th week of pregnancy, localizes placenta & detects multiple pregnancies
4MHz transducer provide effective diagnosis of deep vascular disorders
8MHz transducer allows very precise localization of fine peripheral vessels

Supplied with : Compact Carry case, Headset, Demo CD, AC Adapter, Recorder lead, Gel, Battery, Operating instructions

Model D580

A dedicated unit designed for vascular and artetial investigations with permanently fixed 8MHz transducer
Economical & Compact
Supplied with : Carry Pouch, Headset, Demo CD, AC Adapter, Recorder lead, Gel, Battery, Operating instructions

Common features of D500 & D580

Output can be presented in three different ways:

Built-in speaker
Headset/Headphones attachment
Any chart recorder (eg. ECG recorder) for waveform analysis

Calibration switch for reference to help interpretation of waveforms
Battery-powered audio unit, which can be hand-held, hung round the
neck or clipped to a belt or pocket
Auto power shut-off facility for maximum battery life
Battery low indicator
Can be connected to mains through A.C.Adaptor

Features

Biphasic Defibrillator
Energy selection: from 2 to 230 Joule directly from the front panel.
2-10 step 1 Joule: 10-230 step 5 Joule.
Charge time: 5 sec for 230 Joule with fully charged battery.
100 shocks of 230 Joule with fully charged batteries.
Large 5.7” high resolution backlight TFT LCD display.
Heart rate indicator.
Integrated thermal printer for ECG traces and events documentation.
Dimensions: 340 x 260 x 130 mm

Features
Accuracy and reliability in ECG interpretation

ECG analysis program, proven by CSE/AHA/MIT database
12-lead simultaneous acquisition
Complete digital filters and self-adapting filtering
Up to 300 seconds of rhythm analysis for easier in arrhythmia locating
According to the latest Minnesota code

Streamlined workflow, new operating experience

“One-touch” functional shortcut keys
Onscreen operation guide to check the ECG procedure
Voice reminder and visual alarming for lead-off, low battery and no paper
Support general setting according to different situations for physicians and patients
3 report formats: simple report, median beat report and manual report

Data management solutions

Massive local storage capacity up to 1500 files
ECG management PC software (optional)

Features
Accuracy and reliability in ECG interpretation

ECG analysis program, proven by CSE/AHA/MIT database
12-lead simultaneous acquisition
Complete digital filters and self-adapting filtering
Up to 300 seconds of rhythm analysis for easier in arrhythmia locating
According to the latest Minnesota code

Streamlined workflow, new operating experience

“One-touch” functional shortcut keys
Onscreen operation guide to check the ECG procedure
Voice reminder and visual alarming for lead-off, low battery and no paper
Support general setting according to different situations for physicians and patients
3 report formats: simple report, median beat report and manual report

Data management solutions

Massive local storage capacity up to 1500 files
ECG management PC software (optional)

Features

Meet individual needs

User-adjustable set-point temperature [36’C or 39’C]

Ensure safe use

Easy to read LED display of actual outlet fluid temperature
Audible and Visible over-temperature alarms Alarm test available by the “check” button

Save cost

No disposable set required Available for two standard tube sixes (4mm & 5mm)

Extend application

User-selectable flow rate range [gravity drip]
1-15ml/min : Single-channel setting [photo 1]
1-20ml/min : Dual-channel setting [photo 2]

Offer greater convenience

Mountable horizontally and vertically compact and light-weight with a handle Easy maintenance

User-selectable flow rate range gravity

Applications:

Infusion or transfusion for pre-surgery, post-surgery or short-term surgeries

ECG Cable