ELEKTROMAG DEVICES P LTD.
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to ELEKTROMAG DEVICES P LTD.
Stainless Steel Wire Formed Grid Resistance Box Type Ss
Resistors type ‘SS’ are manufactured from Stainless Steel (AISI 304), wire formed grids making them rustless, unbreakable and light in weight. There is provision at each grid to have a tapping, so that resistance value between steps could be altered.
Following information are required to quote
HP/KW of motor
Rotor Voltage (RV)
Rotor Current (RA)
Rating (5mm / 10mm / continuous)
Total resistance / phase
No. of steps resistances
Resistance values at each step
IP – Protection required (STD IP-23)
Temp. rise required (STD 375º C)
Draw-out type consumption required / not required
Electrical clearance (25mm standard)
Wire Wound Grid Resistance Box Type Ww
Resistors type ‘WW’ are manufactured with Stainless Steel Wire (AISI 304) having temperature co-efficient of 0.094% per*C wound on Steel Plate with Porcelain Channels at the edges. These Resistors are widely used for Higher Resistances Values, but Low Current.
Following information are required to quote
HP/KW of motor
Rotor Voltage (RV)
Rotor Current (RA)
Rating (5mm / 10mm / continuous)
Total resistance / phase
No. of steps resistances
Resistance values at each step
IP – Protection required (STD IP-23)
Temp. rise required (STD 375º C)
Draw-out type consumption required / not required
Electrical clearance (25mm standard)
Punched Stainless Steel Grid Resistance Box Type Pss
Resistors type 'PSS' are manufactured with grids punched out from Stainless Steel Plate (AISI 304). Each Resistor Grid has provision for termination which helps in changing the step Resistance Values of a given Resistor Assembly with out dismantling the whole assembly. These grids retain the end of the Grids and still remain cool which eliminates the hot spots from developing.
Following information are required to quote
HP/KW of motor
Rotor Voltage (RV)
Rotor Current (RA)
Rating (5mm / 10mm / continuous)
Total resistance / phase
No. of steps resistances
Resistance values at each step
IP – Protection required (STD IP-23)
Temp. rise required (STD 375º C)
Draw-out type consumption required / not required
Electrical clearance (25mm standard)
Punched Fechral Grid Resistance Box Type Fs
Resistors type ‘FS’ are manufactured with grids punched out of Plates of Steel – Chromium-Aluminium Alloy (widely known as ‘Fe Cr Al’ –AISI 406).
Following information are required to quote
HP/KW of motor
Rotor Voltage (RV)
Rotor Current (RA)
Rating (5mm / 10mm / continuous)
Total resistance / phase
No. of steps resistances
Resistance values at each step
IP – Protection required (STD IP-23)
Temp. rise required (STD 375º C)
Draw-out type consumption required / not required
Electrical clearance (25mm standard)
Neutral Grounding Resistor
An Earthing Resistor is primarily a safety device. It drastically reduces shock hazards to personnel and equipment. We have, therefore, developed Earthing Resistors for your benefit. Grids are manufactured from a special alloy of stainless steel which makes them rustless and unbreakable thus eliminating maintenance problem and suitable for installation in outdoor atmosphere.
Following information are required to quote
HP/KW of motor
Rotor Voltage (RV)
Rotor Current (RA)
Rating (5mm / 10mm / continuous)
Total resistance / phase
No. of steps resistances
Resistance values at each step
IP – Protection required (STD IP-23)
Temp. rise required (STD 375º C)
Draw-out type consumption required / not required
Electrical clearance (25mm standard)
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
