ELEKTROMAG DEVICES P LTD.
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to ELEKTROMAG DEVICES P LTD.
Moulded Plastic Cable Drag Chains
ELEKTROMAG Moulded Plastic Cable Drag Chains are a logical addition to the range of the steel Cable Drag Chains which have proved themselves worldwide for over 25 years.
They can be used wherever the required energy input cables/hoses are light, the travel is small and the environmental conditions permit the use of plastics.
The chain links and separating plates for taking the cables/hoses, from a single unit in the ELEKTROMAG Cable Drag Chains. The individual chain links can be connected by a snap connection enabling them to be joined to form a chain of any required length. One of the advantages of this system is that the customer can make up any required length of chain so that stocks can be kept and it is not necessary to place an order for each requirement.
CHAIN TYPE : 0320 , 0320/1 , 0450/1 , 0450/11 , 0625 , 0700 (*) , 0900 (*)
If the permissible unsupported length of the chain is exceeded, due to its elastic characteristics the upper section of the chain rests on the lower one. Due to the excellent anti-friction characteristics of the plastic material used, this does not impair the function of the chain when moving.
Chain Type 0700 (*) and 0900 (*) can be supplied with Alum. Stays for variable width
* Can also be supplied with variable plastic flaps (open) for widths 200,250, & 300 mm only .
To specify a ELEKTROMAG Moulded Plastic Cable Drag Chain, we require the following information:
Lenth of travel
Number and outside diameter of the cables/hoses to be installed
Required minimum bending radius of cables or hoses
Types of application (drwg. If possible)
Steel Cable Drag Chains
ELEKTROMAG Steel Cable Drag Chains enable the conveyance of flexible cables/hoses etc. to movable units with maximum reliability.
The Steel Drag Chains are so constructed that they cannot bend below a fixed minimum radius to suit the cable or hose.
ELEKTROMAG Steel Cable Drag Chains are not only used for cable leads but also for hoses conveying gaseous, liquid or pulverised media. Single twisted leads can be conducted close to one another.
ADVANTAGES
Avoidance of mechanical strain on the cables/hoses
No tensile stress or compression,
No frictional wear as there is no relative movement between the cable/ hoses and the cable drag chain.
No bending below an established radius.
No crushing, buckling or forming of loops, or torsion strain.
CHAIN TYPE : 0650/0650.1, 0950, 1250, 1800, 2500, 3200
VARIATION OF STAYS
Frame stay – with detachable profile bar
Solid frame stay – with sliding rail
Unsplit hole stay – Split hole stay
ACCESSORIES FOR ELECTROMAG CABLE DRAG CHAINS
Trough
To guarantee optimum operation of the ELEKTROMAG. Cable Drag Chain, a clean flat surface should be provided. lf this is not possible then a Trough is required.
Steelband covering
ELEKTROMAG Cable Drag Chains with Steelbands are used where it is necessary to protect the cables/hoses from hot chips and dust etc.
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
