A pneumatic pulse-jet system provides continuous, automatic bag cleaning. On a timed cycle, a burst of compressed air is directed down through a venture at the top of bag. This includes clean air into the bag setting up a pneumatic shock wave inside it. The air flow through the bag is momentarily stopped, the bag is firmly flexed, causing the accumulated dust particles to drop off the bag into hopper. Since only few row of bags are cleaned at a time there is no interruption of airflow through the filter. This provides a smooth operating dust control or material handling system. Best Filtration efficiency of Bag Filter system (upto 94%) thus superior emission norms (20-55mg/Nm3).
 

Reverse air bag systems mostly large reverse gas type fabric filters for Cement Kiln and Ferro alloys Furnace lime kilns and metallurgical processes. The Reverse Air Bag House (RABH) is a custom-built filter, designed for cleaning gases with typically high flow rates and high temperatures. 

RABH have been designed to clean emissions from various industrial processes and handle a wide range of gas volumes from 60,000 m3/hr. to more than 15,50,000 M3/hr. Depending upon the duct characteristics, BKF offers the most economical and efficient cleaning method to minimize pressure drop across the bag house. 

The typical RABH is modular in construction, the modules being set in pairs, this construction and operation of the units not only offers control on velocity profiles, but also facilitates on-line maintenance. The units - being custom built and voluminous - are dispatched knocked down to structural and panels.

Cartridge filters are available in vari ous lengths and materials of construction A cartridge filter’s flow is in the opposite direction of a bag filter — from the outside in. This requires that the construction of a cartridge filter be strong enough to have a core with a high burst strength and does not rely on the filter vessel itself for compression strength. Filter alignment rods either tempo rary are usually included with a cartridge vessel to assist with installation and removal. These alignment rods allow the filter to slide and be guided over a rod or shaft and become increasingly important to support the filter and help with changeout if the filter vessel is horizontal or on an angle. Orientation of the cartridge filter vessel can be based upon available plot area or the need to reduce the physical height of long-length cartridge vessels to help with access during removal, replacement, and aid with liquid drain age before filter changeout. Cartridge filters can be built with metal end caps and other high-temperature (450°F)solvent-resistant materials. We have supplied numerous Cartridge Filter System using Pulse Jet technology for various applications and gas volumes ranging from 1000 m3/hr to 12000 m3/hr.

We are supplying all types of dust collecting bags (Pulse jet, RABH, Cartridge Filter etc) of standard and custamize also. Our technical team prefer the different media in different temp and moister in bag house systems. We offer different fabrics like polyester, Polyproplene, Nomex, P-84 Polyamide , Fiber Glass, Ryton, Teflon, Acrylic (Copolymer and homopolymer Etc.)

We are manufactures filter bag cages for all major air pollution control systems. We are staring this business so our objective is to provide a fully integrated design, manufacture supply filter product & services allowing customers to shop from a single source or other sources. 
Product designs and materials 
We provide the best quality in good materials (MS/SS). Cage configuration for circular, diamond, oval, flat and star shaped can be designed and worked in a variety of metal-grades of mild steel, stainless steel and other specialist alloys.

Venturies add to the cleaning efficiency of pulse jet bag filters. IFF offers a wide variety of venturies for both top & bottom removal cages. We can supply venturies manufactured from Carbon steel, Stainless steel, Cast aluminum, Spun Aluminum and cast iron.

A sequential timer is needed to sequence timing of pulse valve operation. It controls the on time of valve and the sequence of solenoid coil firing. The operation can be control in timer mode or in demand mode, which is inbuilt into the sequential timer card. Use of tested components and strong panel box enhance reliability and ensure longer life. The cards are suitable for 110v/230v AC & 24v D.

The RALV series valve are used or volumetitric feeding of pulverized product from hoppers for injecting materials into high pressure pneumatic systems and/or hopper discharge from industrial gas cleaning equipment. We manufacture RALV of various MOC such as C.I/304SS/316SS/SG iron and aluminum body.

Industrial fans and blowers are machines whose primary function is to provide a large flow of air or gas to various processes of many industries. This is achieved by rotating a number of blades, connected to a hub and shaft, and driven by a motor. The flow rates of these fans range from approximately 200 to 2,000,000 cubic feet (5.7 to 57000 cubic meters) per minute. A blower is another name for a fan that operates where the resistance to the flow is primarily on the downstream side of the fan. Only MS quality available.

Description / Specification of Pneumatic Tensioning Tool

We are involved in offering a wide range of Pneumatic Tensioning Tool to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Pneumatic Tensioning Tool. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

We design and manufacture Cartridges & Pleated Filter Bags using spun bonded and needled felt of polyester, aramid and glass fibers. The temperature range is from ambient to 260 deg C. Our cartridges are working successfully in critical applications in cement, mineral processing, utility boilers, pharmaceutical industries etc. Each filter element is custom manufactured with the right top , media , core , and bottom to fit your existing dust collector and provide maximum benefit to your product and organization

PM-730 Features: 

• Most Robut Diffential Pressure Meter. 
•  
• 4 switchable nunits: inWC, mmWC, mbar, PSI 
•  
• Rubber-boot protection for tough applications. 
•  
• Dual Display and Dual Input. 
•  
• Main display: P1, P2 
•  
• Second Display P1 -P2 
•  
• Deimensions 180 mm(H) x 60 mm(W) x 30mm(D) 
•  
• Weight approx. 195 g including battery. 
•  
• Measurement range in WC: 0.00 to +/-60.0 
•  
• mmWC: 0.0 to +/-1500 
•  
• mBar: 0.00 to +/-150.0 
•  
• PSI: 0.000 +/- 2.000 
•  
• Accuracy +/- 1.5% FS

Description / Specification of Monometer

We are involved in offering a wide range of Monometer to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Monometer. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

• Custom Made 
•  
• High-Capacity Shuttle Presses and Multi-Cavity Molds for Lowest Cost Production 
•  
• Liquid Molding 
•  
• Epoxy Transfer Molding for Complete Encapsulation 
•  
• UL Listed B, F & H Insulation Systems and Open Insulation Systems 
•  
• Thermoplastic and Thermoset Molding Available 
•  
• Potting 
•  
• Injection Molding

The pressure gauge can be mounted to the outlet nut on the pump (if there is a hole tapped and threaded there for it), the pressure gauge on some unloader bypass valves can be fitted on there, but many of the pressure washer manufacturers now mount pressure gauges on the instrument panel so that they can easily be seen.

Description / Specification of Pressure Switch

We are involved in offering a wide range of Pressure Switch to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Pressure Switch. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Collecting plate are important for efficiency and long-term reliable operation. collecting electrode incorporates our traditional Optimum Precipitation Zone Electrode design that provides quiescent zones to aid in particulate collection and to reduce re-entrainment during rapping. This assembly has also been found to be very dynamically responsive during rapping, allowing collected materials to be dislodged without excessive force. The collecting plates are periodically rapped by mechanical rappers to dislodge dust, which then drop into hopper below. It takes between 0.01 and 0.1 second for dust particles to acquire a change in the corona region. It is capable to remove particale size .01-10 microne ane clean efficeiency nearly 90%. Its available in different grade like IS152 grade D.

The discharge electrodes, which operate at high voltage, provide the source of electrical charge by creating a corona discharge. The discharge electrode design, its relation to the collecting plate, and the nature of the particulate and gas flow, influence the amount of corona discharge that can be applied without excessive sparking. %. Its available in different grade like IS152 grade D.

ESP Insulators for electrostatic precipitator is majorly used for high-voltage insulation and sealing of the hanging rods for the overhanging frame of the corona electrode, which is passing through the housing of the electrical field. Outer & inner surfaces of the bushing are covered with brown or white glaze, and two end surfaces being ground. They can work at temperature up to 250deg.C with working voltage classes from 72kv to 110kv, and compression failing load not less than 500kn. The inside and outside surface of porcelain casing is brushed with a white glaze or a brown glaze. 85% alumna insulators are extremely dense and will not absorb liquids or gases. They are more resistance to attack by aggressive particulates and gases.

Rappers are utilized to dislodge material from the collecting surfaces, discharge electrodes and gas distribution plates. Improper rapping can lead to spark-over and a reduction in power levels, high resistance grounds and dead short conditions, reentrainment of collected material, damage to ESP internal components and distortion of gas flow. Coils are wound from class (160) copper wire. The Migi is capable of delivering strong shearing forces to remove even the most tenacious of dusts from collecting curtains and rigid mast designed high voltage systems.

A thermostat may be a control unit for a heating or cooling system or a component part of a heater or air conditioner. Thermostats can be constructed in many ways and may use a variety of sensors to measure the temperature. The output of the sensor then controls the heating or cooling apparatus.

The thermostat does this by switching heating or cooling devices on or off, or regulating the flow of a heat transfer fluid as needed, to maintain the correct temperature. 

Types

• Rectangular
• Circular
• Round
• Sizes & methods
• Sizes upto 2000mm dia, length & width.

applications of perforated sheet in cloths dryers, noise abatement components for jet engine nacelles, acoustical panels, covers for electronic and telecommunications equipment, protective guards, filtration components, hammer mill screens, conveyor flights. We can perforate up to 1250mm wide coils and 8.00mm thick in steel, aluminum, stainless, most alloys, plastics and P.V.C.

Description / Specification of Pneumatic Cylinder

We are involved in offering a wide range of Pneumatic Cylinder to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Pneumatic Cylinder. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Our company is highly popular in the domain of manufacture, supply and trade of Hopper Heater. These Hopper Heater are manufactured using premium quality components. These Hopper Heater require low maintenance and are highly durable. Further these Hopper Heater are available in various designs, specifications and shapes. These Hopper Heater have excellent performance level and are highly used in varied industries. The supply voltage of the panel is 3 phase 415 v 50 / 60 hz. Collecting of fine particles below 10 micro meter (pm10 ) in electro-static precipitators has not been very efficient with conventional system. A new high frequency tr set was developed with a pulse duration below 50 micro-second to used it with existing precipitators the current capability had to be in the ka range.

The offered sets are used to supply high voltage power supply to electrostatic precipitation. These sets helps in supplying a smooth and ripple free high voltage into esp field using small internal capacitance of the field. These sets are manufactured with the help of high grade raw material and advanced methodology . Our offered sets are manufactured with the help good grade raw material and sophisticated technology These sets are widely used in transformers for supplying high voltage power to esp.

The system developed for MIGISCAN ESP controller for gravity operated plunger Rapper has the following block modules using embedded Processor as per client specification a. High power thyristor based (R & Y) MIGI rapper controller b. Menu driven software for complete automation setup c. MIGI rapper selection using high powered contractors d. Real time generation for real time RAPPER firing application e. Load current measurement & current feedback analysis for error table generation f. Rapper selection indication using rows & columns LED in front panel. g. Sum alarm circuitry for annunciation purpose h. Intelligent communication using RS485 MOD BUS protocol for external data transfer i. Optical isolation for all input & output data handling j. Interactive visual display for set & running parameters using liquid crystal display. k. Din rail setup arrangement for control outputs & feed back inputs & Communication o/p l. Transformer isolation for mother board circuitry & the rest of the circuitry.

Acclaimed for high corrosion resistance, Asbestos Gaskets is offered by our firm. Made adopting premium quality ingredients and latest technology, these are extensively applicable for valves, pipeline flanges, engine gaskets, industry pumps-etc. Available in varied specifications, sizes and grades, it is professionally certified on platforms.

The thermoelectric voltage resulting from the temperature difference from one end of the wire to the other is actually the sum of all the voltage differences along the wire from end to end.

Thermocouples can be made from a variety of metals and cover a temperature range 200 oC to 2,600 oC.

Offered in varied technical specifications as per the application requirements of our clients, these connectors are manufactured using superior quality raw material and employing contemporary technology. In addition, our quality examiner conducts a series of test on this range in order to eradicate any kind of defect in it.

Features:

• Rugged construction
•  
• Sturdiness
•  
• Efficient working