Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Copper C-Connectors are specifically designed for applications requiring corrosion resistant & high current jointing or tapping of buried copper earthing grids, or to earth rods. The ‘C’ connectors are made from 99.9% high conductivity copper. We can also provide serrations on the inside of the connector, which upon crimping shall break the oxide layer of the conductor.
Material :- ETP Copper
Finish :- Natural
Split bolts are used for tapping or joining aerial hard drawn copper conductors or insulated copper conductors. We manufacture our split bolts by forging instead of casting and this ensures finer grain structure, thus resulting in better rigidity & strength. The split bolts are made from a hard grade high conductivity brass with a captive saddle which applies a distributed pressure to conductors.
Material:- ETP Copper or Bronze or Brass
Finish:- Tin or Copper Plated.
|
|
|
|
|
|
Aluminium PG Clamp are used for tapping or joining of Aluminium conductors. These clamps are forged not extruded, which creates a high strength clamp. Slotted holes allow adjustment for varying conductors on each side. Forged design allows “transverse gripping grooves” to be forged into the conductors clamp area for greater conductivity & pull strength.
Material :- Aluminum
Finish :- Natural
Copper C-Connectors are specifically designed for applications requiring corrosion resistant & high current jointing or tapping of buried copper earthing grids, or to earth rods. The ‘C’ connectors are made from 99.9% high conductivity copper. We can also provide serrations on the inside of the connector, which upon crimping shall break the oxide layer of the conductor.
Material:- ETP Copper
Finish:- Natural or Tin Plated
Copper C-Connectors are specifically designed for applications requiring corrosion resistant & high current jointing or tapping of buried copper earthing grids, or to earth rods. The ‘C’ connectors are made from 99.9% high conductivity copper. We can also provide serrations on the inside of the connector, which upon crimping shall break the oxide layer of the conductor.
Material:- ETP Copper
Finish:- Natural or Tin Plated
Copper C-Connectors are specifically designed for applications requiring corrosion resistant & high current jointing or tapping of buried copper earthing grids, or to earth rods. The ‘C’ connectors are made from 99.9% high conductivity copper. We can also provide serrations on the inside of the connector, which upon crimping shall break the oxide layer of the conductor.
Material:- ETP Copper
Finish:- Natural or Tin Plated
Copper C-Connectors are specifically designed for applications requiring corrosion resistant & high current jointing or tapping of buried copper earthing grids, or to earth rods. The ‘C’ connectors are made from 99.9% high conductivity copper. We can also provide serrations on the inside of the connector, which upon crimping shall break the oxide layer of the conductor.
Material:- ETP Copper
Finish:- Natural or Tin Plated
Split bolts are used for tapping or joining aerial hard drawn copper conductors or insulated copper conductors. We manufacture our split bolts by forging instead of casting and this ensures finer grain structure, thus resulting in better rigidity & strength. The split bolts are made from a hard grade high conductivity brass with a captive saddle which applies a distributed pressure to conductors.
Material:- ETP Copper or Bronze or Brass
Finish:- Tin or Copper Plated.
Bi-Metallic Lugs are made from the Highest Quality Electrolytic Grade Copper & Aluminium which are joined using a friction welding process. The barrels are chemically treated to reduce resistance & Corrosion. The barrels are filled with a jointing compound, which breaks the oxide layers on the Aluminium Conductor.
The most crucial process in the manufacturing of bimetallic lugs is friction welding, and our in-house friction welding machine (Kuka, Germany) is CNC controlled and is second to none. The advantage of our machine is that the turning attachment first takes a light cut on the copper palm on the machine itself which minimizes atmospheric oxidation thus resulting in a very sound weld joint. Apart from this the entire machine is PLC controlled and has servo-controlled motors, this results in strict parameter control again resulting in a sound weld joint.
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.