Power Control Center Panel (P.C.C.)

This is the first point where power comes from Transformer and DG.Here circuit resistance is very low, which results in highest fault level. PCC panel must have proper fault level calculation. Bus bar, support, cooling and switchgear should be designed accordingly. Form (3,4) design help forman power safety and optimum utilisation of the system.We also give different colour codingen closure for electricity board/ DG and bus coupler for better understanding for the operator.
 

Technical Specifications

• Enclosure : Fabricated with 1.6/2 mm CRCA sheet and 3 mm sheet for Gland Plate with Bus duct flange and ample care for top/bottom termination, cable tie arrangement.
• Rated Current : Upto 6300 Ampere Aluminium or Copper main bus bar. Operational Voltage.
• Frequency :  380/415/440/690 Volt at 50/60 Hz, 3 Phase, 4 wire system.
• Short Circuit Level : 35KA/50KA/70KA/100KA for 0.5/1/3 second.
• IP Protection : Our CPRI Bhopal certification gives locational advantage like Indoor/ outdoor
• Automation : Smart system gives information to decision makers for strategy and analysis.