Elstein Infrared Heaters are designed to produce maximum output in form of heat energy. They are constructed by a firmly burnt-in heating coil. The heater incorporates highly heatproof resistance wire that provides safety against any damage. We supply Custom Wattage Infrared Ceramic Heaters as per the requirement of our clients.

The specialty of these heaters lies in its external stricture. The flat shape of heaters gives them a flexibility to be used with more comfort. They look like a new-age product. There are several advanced features incorporated in these heaters making them better than general heaters

Ceramic Flat Infrared Heaters are constructed by a firmly burnt-in heating coil. They consist of high heatproof resistant wire.

Elstein HTS High Temperature Heaters are ceramic infrared panel heaters, which can be used for operating temperatures up to 900 °C and surface ratings up to 64 kW/ m².

HTS series heaters are produced using a hollow-casting ceramic process and are filled with thermal insulation material. This improves the radiant power output to the material to be heated.

Furthermore, there is a significant reduction in heat dissipated in the wiring space, so that additional insulation of the heating area is usually not required.

Elstein SHTS super high temperature heaters were developed to increase the previous maximum possible surface rating of ceramic panel heaters from 64 kW/ m² to 77 kW/ m².

The SHTS heaters, produced using the hollow casting ceramic process, are filled with thermal insulation material and have a special black glaze and a gold-plated back. At an operating temperature of 900 °C, over 75 % of the electrical energy supplied is transferred to the material to be heated as medium to long-wave IR radiation.

Elstein HLS high performance heaters are ceramic infrared rod heaters, which can be used for operating temperatures up to 1000 °C and surface ratings up to 87 kW/ m².

HLS Series heaters have a gold-plated ceramic parabolic reflector and transfer up to 80% of the energy supplied as infrared radiation to the material to be heated.

Elstein IRS rod heaters are ceramic infrared heaters, designed for operating temperatures of up to 750 °C. With the help of MPO and MPO/2 mounting profiles, surface ratings of up to 72.0 kW/ m² can be realised.

IRS series heaters have one mounting socket on each side, with which they can be fixed to a mounting profile with fixing springs.

Elstein IRS/K rod heaters are ceramic infrared heaters, which are available in different lengths of up to 300 mm and surface ratings of up to 75 kW/ m²

Unlike the IRS Series heaters, which have the leads running through the mounting sockets on each side, the leads of IRS/K Series lie only on one side.

Elstein IOT/75 and IOT/90 heaters are ceramic infrared dark heaters with E27 screw caps.

The standardised E27 thread allows easy and safe installation, as the heaters can be screwed in like bulbs into porcelain or metal sockets with porcelain insert.

Due to their simple connection, IOT/75 and IOT/90 infrared heaters are suitable both for individual operation and for configuring groups of heaters. They have diverse applications, in particular they range over terrariums/pets a

By quoting the REF/250 or REF/125 construction set designations and the heater type required, the REO/250 and REO/125 reflectors are available fitted with the FSR, HFS, HSR, HTS and SHTS series ceramic infrared panel radiators.

The REO reflectors are made from polished stainless steel. They are used to hold and fix panel heaters with the dimensions 245 mm x 60 mm and 122 mm x 60 mm as well as for reflecting the IR radiation in the direction of the material to be heated.

Description / Specification of Accessories

We are involved in offering a wide range of Accessories to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Accessories. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Advantage

Heating is done by radiation, this eliminates loss of energy used for heating media and heat loss due to convection
Here the infrared waves penetrate the material, on which it falls and delivers the heat directly to that material

ACE HEAT TECH infrared modules are the ideal solution for the application of infrared heat technology
They save the user design costs and time and are substantially less expensive than the complete infrared systems
They are complete and ready for the operation.
This provides advantages for both the, user while installing in to the existing systems and for the planing / project engineers.
Infrared modules can be individually regulated, controlled and ventilated.
Because of its modular construction it is possible to make the heating panels of practically any size with heaters length up to 40

Power Density up to 150KW/m2 is achieved. Heating up and cooling down time is approximately one second
These heaters are available with gold reflector and without reflector
Reflector is in the form of gold coating on outer rear side of the tube
Due to reflector heat loss from backside is prevented and thus power saving is achieved
This also results in making surrounding work area cooler
This also increases the efficiency and directionality of the heater
There are two standard sizes 11 mm x 23 mm and 15 mm x 32 mm in cross section. Maximum length available is 2000 mm

Features:

• Specially designed start filament can effectively reduce the color temperature of lamps so that the lamps can emit infrared with longer wavelength.
• Star filament lamps are ideal substitute for the carbon lamps.
• The average working life is around 7000 hours.
• Star filament lamps can be used on both single tube and twin tube infrared emitters.

Features

[Ace Heat - Short Wave IR Lamp] In addition to the standard emitters, we also design and manufacture emitters in all kinds of shapes.

• Water cooling emitters
• Omega-type emitters
• Bended tube-type emitters
• Spiral-type emitters
• Any other kind of emitters
• U-type emitters
• Round-type emitters
• C-type emitters
• L-type emitters

Description / Specification of Mounting Clamps For Infrared Heaters

We are involved in offering a wide range of Mounting Clamps For Infrared Heaters to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Mounting Clamps For Infrared Heaters. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Salient Features :

• Quartz Infrared Heater is available in diameters of 8, 10, 12, 15 and 19 mm
• Available in lengths from 300 to 1500 mm
• Can be used only in horizontal position
• Fitted with specially designed heating coil to ensure longer life
• Least maintenance required

Applications

• Thermoforming
• Plastic forming
• Shrink packaging tunnels
• Laminating
• Curing rubber
• Drying textiles
• Drying lacquers and paints

• Operating temperature 900° C
• Using Ni-Cr or Fe-Cr-A1 resistance wire as filaments
• Response time around 1 minute
• IR wavelength between 2-4 M
• Average working life up to 10000 hours
• Gold or ceramic coating at rear side as a reflectors
• Dimensions 11 x 23mm and 15 x 33mm
• Max. overall length up to 3mm

• Color temperature 1800 °K
• IR wavelength between short wave and medium wave
• Response time around 1 ~2 seconds
• Average working life 7000 hours
• Gold or ceramic coating at rear side as a reflectors
• Dimensions 15x33mm
• Max. overall length up to 4M
• Vertical and horizontal emitters are available

Some of the other properties include

These are highly resistant to thermal shock due to extremely low co-efficient of thermal expansion
They have excellent electrical strength that offer stability under temperature variation

They are available from 2mm inside diameter to 200mm outside diameter up to 3000mm length.

[Ace Heat - Translucent Tube] The translucent tubes have typical characteristics of precise dimension, strong heat resistance and high thermal stability. It serves as material of infrared heating for heaters, microwave oven, electrical baking oven, car painting and baking. These tubes can also be used as silica immersion heater with one end of glass tube closed.

Properties

• High purity
• Abrasion resistance
• Low co-efficient of thermal expansion

Applications

Quartz Rods are used to fabricate Silicon Wafer Carriers in the semi conductor industry and as handles in fiber optic manufacturing industry.

Applications

• Aircraft
• High Temperature Thermal Insulation
• Satellite & Antennas
• Structural Material Technology
• Thermal Insulation for Semiconductor Industry

These are used in Semi Conductor industry to produce semi conductor wafer applications.

For Production of high Quality wafers, starting materials are added to a heating to high temperatures and take out as single crystal, Quartz Glass is a best suitable material that is having the high purity and high temperature properties required for this process.

It has the advantage as,

Advantages of high purity, high temperature resistance with big size, good thermal insulation, economization on energy, quality stability etc.

Features :

• Compact design, suitable for control panel flush mounting with panel, having a cutout size of 90mm x 90mm
• Supply voltage indication feature
• Input : 220 +/- 10% volts,1?,50 Hz
• Output : 16Amps, 25 Amps or 40 Amps rated output, with required connected load of equipment arranged in series
• Output Terminal : for Phase/Neutral and two terminals for Series Load to be connected, which can be heaters & equipment
• Adequate capacity heat sink is provided
• Configured with imported solid state current control cascade unit
• Precise & smooth % of supply voltage adjustment
• Configured with digital read-out indication for % supply of voltage