Vacuum Type Injectable Powder Filling Machine
This machine used for filling injectable powder into vials & then half or full bunging. The machine operates with vacuumetric filling principle for precise fill volume accuracy.
- Sensor and solenoid valve system ensures no vial no fills.
- Spring loaded Teflon top seal for powder hopper reduces the friction to avoid chance of White particle shading during production.
- Doctor blade and wiper blade can be adjusted from outside also without disturbing any production, which saves lot of time, powder wastage and chances of area condition disturbance.
- Each port is numbered for accuracy inspection and for micro settings.
- Multiple dosing of injectable powder for higher volume.
- Special clutch devices are provided on vial separator for safety purpose.
- Vibratory bowl for rubber stoppering unit support to run machine with total claimed speed of machine. Optionally vacuum type bunging is also provided for half bunging for lyophilized vials.
- Pre and Post gasing unit for Nitrogen or Carbon Dioxide flushing.
- Speed : Single Head up to 120 vials / min. , Double Head up to 240 vials / min.
- Suitable for various sizes of caps.
- Available up to 12 head depending up on output requirement.
- Due to the special safety device on star wheel shaft, it prevents any damage to the working parts in case of jamming or over loading.
- "No Container, No Cap, No Capping".
- Perfect synchronization between conveyor and star wheel is achieved by using single motor only.
- Vibratory / Mechanically oriented cap feeding arrangement can be provided.